Zonet ZFS3316P Installation guide

Zonet
Brand
Zonet
Model
ZFS3316P
Category
Network switches
Type
Installation guide

Zonet ZFS3316P is a network switch with 16 RJ-45 ports. It is designed to connect multiple computers and other network devices together in a Local Area Network (LAN). The switch supports data transfer speeds of up to 100Mbps and is compatible with both UTP and STP cables. It also has LED indicators for power and network activity, so you can easily monitor the status of your network. The ZFS3316P is a great choice for small businesses, home offices, and other environments where you need to connect multiple devices to a network.

Zonet ZFS3316P is a network switch with 16 RJ-45 ports. It is designed to connect multiple computers and other network devices together in a Local Area Network (LAN). The switch supports data transfer speeds of up to 100Mbps and is compatible with both UTP and STP cables. It also has LED indicators for power and network activity, so you can easily monitor the status of your network. The ZFS3316P is a great choice for small businesses, home offices, and other environments where you need to connect multiple devices to a network.

1
P
P
a
a
c
c
k
k
a
a
g
g
e
e
C
C
o
o
n
n
t
t
e
e
n
n
t
t
s
s
One ZFS3316P
One Quick Installation Guide (English)
One Quick Installation Guide (Spanish)
One Power Adapter
F
F
r
r
o
o
n
n
t
t
P
P
a
a
n
n
e
e
l
l
LED indicators
LED Status
Operation
POWER Green
Steady: Power is ON
LNK/ACT
Green
Steady: Network cable connected and connection
established
Flash: Data packets are transmitting
Off: Network cable is unplug
Diagram
2
R
R
e
e
a
a
r
r
P
P
a
a
n
n
e
e
l
l
16 RJ-45 ports
S
S
i
i
d
d
e
e
P
P
a
a
n
n
e
e
l
l
One Power Connector
C
C
a
a
u
u
t
t
i
i
o
o
n
n
• ZFS3316P must put on a surface that is able to hold at least 5kgs
weight
• Power adapter must be connected to the switch properly and
securely
• Suggested at least 10cm empty space around the unit for sufficient
ventilation and cooling
• Do not recommend to put any items on top of the switch
• ZFS3316P is not ideally to work in a high electromagnetic
environment, under direct sunlight, dust and vibrating surfaces
• Maximum distance between the switch and the end node is 100
meters
• Must use an unshielded or shielded twisted-pair (UTP/STP)
Category 5 or better cables to ensure proper transmission
• Loss of data packet may encounter when using cable other than
Category 5
3
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
1. Connect the power adapter to
the wall socket, and then
connect it to the “Power” socket
of ZFS3316P.
2. Connect all your computers,
network devices
(network-enabled consumer
devices other than computers,
like game console, or switch /
hub) to the LAN port of
ZFS3316P with UTP/STP
Category 3/4/5 cables.
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
1. Check the power adapter and power wall-jet to make sure they are
function properly. Check if the switch is turned-ON and power LED
is steady.
2. Check all cable connections between computer and the switch to
make sure they are connected properly.
3. Maximum distance is 100 meters from the switch to end nodes.
4. Link LED(s) is ON/flashing at the connected port(s) of the switch.
5. Test your computer’s network adapter to make sure it is installed
and functioned properly.
6. Check issues such as network collisions, domain limitations, and
other physical installation aspects. Make sure they all meet IEEE
standard network installation requirements, more details can be
found at www.ieee.org.
7. If problem still persists, write down your software/hardware
configuration and LED error indications and contact your local
retailer or the store purchased for further assistance.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Zonet ZFS3316P Installation guide

Zonet
Brand
Zonet
Model
ZFS3316P
Category
Network switches
Type
Installation guide

Zonet ZFS3316P is a network switch with 16 RJ-45 ports. It is designed to connect multiple computers and other network devices together in a Local Area Network (LAN). The switch supports data transfer speeds of up to 100Mbps and is compatible with both UTP and STP cables. It also has LED indicators for power and network activity, so you can easily monitor the status of your network. The ZFS3316P is a great choice for small businesses, home offices, and other environments where you need to connect multiple devices to a network.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents