You should use wiring of an appropriate cross sectional area to suit the circuit
design.
Document subject to change without prior notice, please see
www.sargenttld.co.uk for updates and additional information.
Specification
9V to 14.5V DC operation
Digital voltmeter with on / off switch
Panel dimensions 82mm x 80mm
Cut out size 55mm x 55mm
Hole centres 70mm
Sargent Electrical Services Ltd.
EC10 Control Panel -Installation Instructions
Issue 01 21/6/13
Sargent Electrical Services Ltd.
EC10 Control Panel -Installation Instructions
Issue 01 21/6/13
2POWER (+VE IN)
PANEL CONNECTOR
1
-VE INPUT (Black -for Voltmeter only)
GROUND (-VE IN)
+VE INPUT (Red -for Voltmeter only)
Specification
9V to 14.5V DC operation
Digital voltmeter with on / off switch
Panel dimensions 82mm x 80mm
Cut out size 55mm x 55mm
Hole centres 70mm
2POWER (+VE IN)
PANEL CONNECTOR
1
-VE INPUT (Black -for Voltmeter only)
GROUND (-VE IN)
+VE INPUT (Red -for Voltmeter only)
You should use wiring of an appropriate cross sectional area to suit the circuit
design.
Document subject to change without prior notice, please see
www.sargenttld.co.uk for updates and additional information.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Pentax 21870 User manual
-
JL Audio MHD750 Owner's manual
-
-
-
Carf-Models Composite-ARF YAK 55SP Owner's manual
-
-
-
Weider WEEVSY4922 User manual
-
NordicTrack NTEVBE0141 User manual
-