Speedi-Products SM-SDL45 08 Operating instructions

Saddle Installation Manual

45 Degree and 90 Degree Saddle Take Off for Round Duct

Cut the appropriate size hole in the round duct pipe you are installing onto.

• Cut the appropriate size hole in the round duct pipe you are installing onto.

• If your saddle has an adhesive gasket remove the paper tape prior to installation.

• Place the saddle onto the round duct pipe being sure to orient the direction of the saddle and/or any damper control.

• Secure with sheet metal screws (not provided) in the mounting holes on the flange.

45 Degree Saddle 90 Degree Saddle