Midmark 222, 223 Barrier-Free™ Examination Table (-015 thru -017) Installation guide

222, 223 Barrier-Free™ Examination Table (-015 thru -017)
Midmark
Brand
Midmark
Model
222, 223 Barrier-Free™ Examination Table (-015 thru -017)
Type
Installation guide
003-2557-99 Rev. AA3 (4/18/19)
003-2557-99 Rev. AA3 (4/18/19)
Install Assist Tool
For use with models
222, 223, 622, 623, & 625
Install Assist Tool
For use with models
222, 223, 622, 623, & 625
Step 3:
A) Press Base Up on hand control
to raise chair height.
B) Insert Install Assist Tool into spline
receptacles.
Step 2: Lay Exam Chair Cross Member
flat on metal crossbar.
Exam Chair
Cross Member
Metal
Crossbar
Step 1:
A) Lift seat section.
B) Hook Exam Chair Cross Member onto hinge lip.
Equipment Alert
Only attach Install Assist Tool to Cross Member
designed for these models. To prevent damage
DO NOT attach directly to the chair splines.
Step 4: Press Base Down on hand control
to lift the chair base to desired height.
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
English - 2
English - 2
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
Step 3:
A) Press Base Up on hand control
to raise chair height.
B) Insert Install Assist Tool into spline
receptacles.
Step 2: Lay Exam Chair Cross Member
flat on metal crossbar.
Exam Chair
Cross Member
Metal
Crossbar
Step 1:
A) Lift seat section.
B) Hook Exam Chair Cross Member onto hinge lip.
Equipment Alert
Only attach Install Assist Tool to Cross Member
designed for these models. To prevent damage
DO NOT attach directly to the chair splines.
Step 4: Press Base Down on hand control
to lift the chair base to desired height.
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
Page is loading ...
Page is loading ...
Equipment Alert
Only attach Install Assist Tool to Cross Member
designed for these models. To prevent damage
DO NOT attach directly to the chair splines.
Install Assist Tool
For use with models
230, 630 (-001 thru -009),
641, & 647
Step 2:
A) Press Base Up on hand control
to raise chair height.
B) Insert Install Assist Tool legs into
spline receptacles.
Step 3: Press Base Down on hand control
to lift the chair base to desired height.
Proceedure Chair
Cross Member
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
English - 3 English - 3
Install Assist Tool
For use with models
230, 630 (-001 thru -009),
641, & 647
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
Step 1:
A) Press Tilt Up on hand control.
B) Place Procedure Chair Install Assist
Tool behind the tilt actuator shaft.
C) Press Tilt Down on hand control.
Equipment Alert
Only attach Install Assist Tool to Cross Member
designed for these models. To prevent damage
DO NOT attach directly to the chair splines.
Step 2:
A) Press Base Up on hand control
to raise chair height.
B) Insert Install Assist Tool legs into
spline receptacles.
Step 3: Press Base Down on hand control
to lift the chair base to desired height.
Proceedure Chair
Cross Member
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
Step 1:
A) Press Tilt Up on hand control.
B) Place Procedure Chair Install Assist
Tool behind the tilt actuator shaft.
C) Press Tilt Down on hand control.
003-2557-99
003-2557-99
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Midmark 222, 223 Barrier-Free™ Examination Table (-015 thru -017) Installation guide

222, 223 Barrier-Free™ Examination Table (-015 thru -017)
Midmark
Brand
Midmark
Model
222, 223 Barrier-Free™ Examination Table (-015 thru -017)
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents