Midmark 230 Universal Procedures Chair User guide

TP202 20-42-FO-00014 Rev A2 C2169

Set Up / User Guide

Knee Crutches / Cladding

9A410 / 9A411 / 9A412 / 9A413

Applies to Models:

204 / 222 / 223

604 / 622 / 623 / 625

230 / 630

Special Tools:

none

003-10286-99 Rev. AA2 (4/2/20)

Style P

English

Français

Español

English - 2

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Model / Serial Number:

Date of Purchase:

Midmark Authorized Service

Company:

Dealer:

Product Information

Model / Serial

Number Location

English - 3

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Important Information

Product Information ...............................................................................................................2

Product Registration .............................................................................................................4

Operating Conditions ............................................................................................................4

Disposal of Equipment .......................................................................................................... 4

Authorized Representative ................................................................................................... 4

Important Information ............................................................................................................ 5

Intended Use ..........................................................................................................................5

Safety Instructions ................................................................................................................. 5

Set Up

Cladding Removal (models with cladding) ........................................................................6

Knee Crutch Brackets (204 / 222 / 223 / 604 / 622 / 623 / 625) .....................................7

Knee Crutch Brackets (230 / 630) .......................................................................................8

Operation

Positioning (all models) ......................................................................................................10

Maintenance

Calling for Service ...............................................................................................................11

Cleaning ................................................................................................................................11

Preventative Maintenance..................................................................................................11

Warranty Information

Limited Warranty .................................................................................................................12

Table of Contents

English - 4

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Disposal of Equipment

At the end of product life, the chair, accessories, and other consumable goods may have become

contaminated due to normal medical use. Consult local codes and ordinances for proper disposal

of equipment, accessories and other consumable goods.

Product Registration

To register your product, go to www.midmark.com

Operating Conditions

Ambient Temperature Range: .....................................+10°C to +40°C (+50°F to +104°F)

Relative Humidity........................................................30% to 75% (non-condensing)

Altitude........................................................................3000m or less

Authorized Representative

Customers in the EU should direct all questions, incidents, and complaints to Midmark’s Authorized

Representative listed below.

CEpartner4U

Esdoornlaan 13

3951 DB Maarn, The Netherlands

Phone: +31 343 442 524

Fax: +31 343 442 162

Warning

In the event of any serious incident in relation to the device,

please contact Midmark and the appropriate competent authority.

English - 5

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Catalogue Number

Manufacturer

Serial Number

WARNING

Indicates a potentially hazardous situation which could result in serious injury.

Important Information - Safety Symbols

Caution

Indicates a potentially hazardous situation which may result in minor or moderate injury. It

may also be used to alert against unsafe practices

Equipment Alert

Indicates a potentially hazardous situation which could result in equipment damage.

Note

Amplifies a procedure, practice, or condition.

Symbol Glossary

Intended Use

To support patient’s knees / legs during examinations & procedures.

Safety Instructions

Warning

No modification of this equipment is allowed.

Warning

Do not sit on Knee Crutches.

Warning

Do not use Knee Crutches as a gripping surface during ingress egress.

Warning

Always disconnect power to chair before removing covers or performing any service

procedures.

English - 6

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Set Up - Cladding Removal (models with cladding)

Screw

Requirements:

604 / 622 / 623 models require a special cladding

kit to accommodate the knee crutch brackets. Refer

to Midmark pricing catalog to determine proper kit.

Models: 622 / 623

622 / 623 cladding is magnetic.

Pull outward to remove.

Note

The cladding on 604 models with serial numbers

V1177445 thru present is magnetic. It is not

necessary to remove drawers / screws.

Models: 604

To remove 604 cladding...

A. Pull drawer out.

B. Press RH tab Up and LH tab Down

and remove drawer.

C. Remove screws and cladding.

Models: 625

To remove 625 cladding:

A. Press two tabs.

B. Pull bottom of cladding away from table.

C. Lift cladding up to remove.

Tabs

Serial #’s prior to V1177445:

Cladding is secured with

screws from inside cabinet.

Note

Remove all accessories (ex. chair arms) before performing this procedure.

English - 7

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

A) Remove socket cover. (If present)

B) Position clamp bracket & washers. Secure with two hex screws. Apply hole cover label if desired.

Repeat for other bracket.

C) Position clamp plates with offset against upperwrap as shown, then secure clamp plates to brackets

with screws.

D) (604 / 622 / 623) Install notched side cladding. Note: If installing brackets with splines, you must

remove hole plug from the side cladding.

D) (625) Remove access panels. Install side cladding. Note: If installing brackets with splines, you must

remove hole plugs from the side cladding.

Set Up - model’s 204 / 222 / 223 / 604 / 622 / 623 / 625

Clamp Plate

Washer

(Installation is the same for

Knee Crutch Bracket w/Spline

Hole Cover Label

Hole Plug

Access Panel

622 / 623

604

625

Socket Cover

Note

Remove all accessories (ex. chair arms) before performing this procedure.

English - 8

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Set Up - model’s 230 / 630

Nut

Stirrup Stop

Screw

Hole Plug

A) Remove to hole plugs.

B) Remove stirrup stop screw and stirrup assembly.

C) Position clamp bracket. Secure with two screws / nuts. Repeat for other bracket.

D) Install stirrup assembly, and stirrup stop screw.

Note

Remove all accessories (ex. chair arms) before performing this procedure.

English - 9

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Set Up - Knee Crutches (all models)

To install Knee Crutch...

A) Install knob / washer as shown.

(Do not tighten knob)

B) Slide knee crutch into block.

C) Tighten knob to secure knee crutch.

English - 10

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Operation - Knee Crutches (all models)

Pivot Adjustment Knob

(Articulating Knee Crutches only)

Strap Buckle

Security Strap

Locking Knob

To Position Knee Crutch...

A) Loosen locking knob to position knee crutch.

B) Tighten locking knob to secure knee crutch.

English - 11

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Maintenance

Calling for Service

If service is required, contact your authorized Midmark dealer.

To contact Midmark Versailles Tech Service directly:

1-800-MIDMARK (1-800-643-6275)

8:00 am until 7:00 pm Monday - Thursday (EST) [excluding standard U.S. holidays]

8:00 am until 5:00 pm Friday (EST) [excluding standard U.S. holidays]

www.midmark.com

Cleaning

Painted Metal / Plastic Surfaces

Clean the painted metal and plastic surfaces weekly using a clean soft cloth, and mild cleaner.

Preventative Maintenance

Periodically inspect the following areas:

 •Allfastenersshouldbeinplaceandtightenedsecurely.

 •Allmechanicalfunctionsshouldoperateproperly.

Note

Model / serial number information is required when calling for service.

Equipment Alert

The Knee Crutches are resistant to most medicinal-type stains, but may be damaged

by solvents and dyes. Immediately remove any fluids spilled on the Knee Crutches.

English - 12

003-10286-99 © Midmark Corporation 2019

TP202 20-42-FO-00014 Rev A1 C2169

Warranty Information

Limited Warranty

SCOPE OF WARRANTY Midmark Corporation (“Midmark”) warrants to the original retail purchaser that it will, at Midmark’s option, repair or

replace components of the domestic and international medical products manufactured by Midmark (except for components not warranted

under “Exclusions”) that are defective in material or workmanship under normal use and service. The sole remedy under this limited warran-

ty is the repair or replacement, at Midmark’s option, of the applicable components. This limited warranty shall only apply to defects that are

reported to Midmark within the applicable warranty period and which are determined to exist upon examination by Midmark,. This warranty

extends only to the original retail purchaser of a product and is not transferable or assignable. Replacement components or products may

beusedand/orrefurbishedcomponentsorproducts,providedtheyareoflikequalityandspecicationsasnewcomponentsorproducts.

Midmark warrants to the original retail purchaser that during the applicable warranty period it will repair or replace software contained

within the products manufactured by Midmark (except for those not warranted under “Exclusions”) if: (1) the media on which the software is

furnished exhibits defects in material or workmanship under normal use; or (2) the software does not substantially conform to its published

specications.

APPLICABLE WARRANTY PERIOD The applicable warranty period, measured from the date of invoice to the original retail purchaser of

the product and shall be one (1) year for all warranted products and components.

OBTAINING WARRANTY SERVICE Warranty service must be obtained through either Midmark or an authorized dealer in the Midmark

product line for which warranty service is requested. Midmark may be contacted for warranty service inquiries or issues via email at www.

midmark.com; by phone at 1-800-MIDMARK or by mail to Midmark Corporation, 60 Vista Drive, Versailles, Ohio 45380. It is the retail pur-

chaser’s obligation to arrange for delivery of a product to Midmark or one of its authorized dealers for warranty service, which delivery shall

be at retail purchaser’s expense. It is also the retail purchaser’s obligation to comply with the warranty service instructions provided either

by Midmark or its authorized dealer. The retail purchaser must provide Midmark with completed warranty registration information within

thirty(30)daysafterpurchaseinordertoobtainthebenetsofthislimitedwarranty.

EXCLUSIONS: This limited warranty does not cover and Midmark shall not be liable for the following:

(1) Defects, damage or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight damage,

negligent storage, tampering or failure to seek and obtain repair or replacement in a timely manner;

(2) Products which are not installed, used, and properly cleaned and maintained as required or recommended in the Midmark “Installation”

and/or“Installation/OperationManual”fortheapplicableproduct,includingthespeciedstructuralandoperationalenvironmentalconditions

and electrical requirements;

(3) Products considered to be of a consumable or sterile nature;

(4) Accessories or parts not manufactured by Midmark;

(5) Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with such

products which are not expressly authorized in writing in advance by Midmark;

(6) Costs and expenses of routine maintenance and cleaning; and

(7) Representations and warranties made by any person or entity other than Midmark.

(8) Matching of color, grain or texture except to commercially acceptable standards;

(9)Changesincolorcausedbynaturalorarticiallight;

(10) Custom manufactured products;

(11)AlterationsormodicationstotheproductbyanypersonorentityotherthanMidmark;and

(12) Products that would otherwise by covered under this limited warranty, but are acquired: (i) from a person or entity that is not Midmark

or one of its authorized dealers; or (ii) from a Midmark dealer that is not authorized to sell the product at issue in the geographic territory

where the purchaser is located, or is not authorized to sell the product at issue within the medical market.

SOFTWARE; WITH RESPECT TO SOFTWARE THAT IS A PRODUCT OR COMPONENT THEREOF, MIDMARK DOES NOT WARRANT

THAT THE SOFTWARE: (1) IS ERROR FREE; (2) CAN BE USED WITHOUT PROBLEMS OR INTERRUPTIONS; OR (3) IS FREE FROM

VULNERABILITY TO INTRUSION OR ATTACK BY VIRUSES OR OTHER METHODS.

EXCLUSIVE REMEDY; CONSEQUENTIAL DAMAGES DISCLAIMER MIDMARK’S ONLY OBLIGATION UNDER THIS LIMITED WARRAN-

TY IS THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS. MIDMARK SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS

ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OR DELAYS, INCLUDING, BUT

NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, LOSS OF DATA, DOWNTIME, COVER AND

EMPLOYEE OR INDEPENDENT CONTRACTOR WAGES, PAYMENTS AND BENEFITS. THIS DISCLAIMER SHALL SURVIVE ANY

FAILURE OR ASSERTED FAILURE OF THE ESSENTIAL PURPOSE OF THIS LIMITED WARRANTY OR ITS REMEDIES SPECIFIED

HEREIN. WARRANTY DISCLAIMER THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRAN-

TIES, EXPRESS OR IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACE-

MENT OF DEFECTIVE PARTS.

STATUTE OF LIMITATIONS No action may be brought against Midmark for breach of this limited warranty, an implied warranty, if any, or for

any other claim arising out of or relating to the products, more than ninety (90) days following expiration of the limited warranty period.

NOAUTHORIZATIONNopersonorrmisauthorizedtocreateorapproveforMidmarkanyotherobligationorliabilityinconnectionwith

the products.

Warranty Information

English - 13

TP202 20-42-FO-00014 Rev A1 C2169

Notes:

English - 14

TP202 20-42-FO-00014 Rev A1 C2169

Notes:

English - 15

TP202 20-42-FO-00014 Rev A1 C2169

Notes:

Midmark Corporation

60 Vista Drive

Versailles, OH 45380 USA

1-800-643-6275

+1-937-526-3662

www.midmark.com

TP202 20-42-FO-00014 Rev A1 C2169

Page is loading ...

Français - 13

TP202 20-42-FO-00014 Rev A1 C2169

Remarques :

Français - 14

TP202 20-42-FO-00014 Rev A1 C2169

Remarques :

Français - 15

TP202 20-42-FO-00014 Rev A1 C2169

Remarques :

TP202 20-42-FO-00014 Rev A1 C2169

Midmark Corporation

60 Vista Drive

Versailles, OH 45380 USA

1-800-643-6275

+1-937-526-3662

www.midmark.com

Page is loading ...

Midmark 230 Universal Procedures Chair User guide

This manual is also suitable for

Midmark 230 Universal Procedures Chair User guide

in other languages

Related papers

Other documents