2. Midmark
  3. 630 Human Form® Procedures Chair (-010 thru -013, -020 thru -023)
630 Human Form® Procedures Chair (-010 thru -013, -020 thru -023)

Midmark 630 Human Form® Procedures Chair (-010 thru -013, -020 thru -023) Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Midmark 630 Human Form® Procedures Chair (-010 thru -013, -020 thru -023) Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I raise the chair height with the Install Assist Tool?
    How do I insert the Install Assist Tool legs into the spline receptacles?
    How do I adjust the chair base to the desired height?
    How do I remove the Install Assist Tool legs?
MA8604i
Install Assist Tool
For use with model 244,
630 (-010 thru -013 & -020 thru -023)
003-2558-99 Rev. AA2 (11/19/18)
003-2558-99 Rev. AA2 (11/19/18)
English - 4
English - 4
244630
MA8604i
Step 2: Press Chair Down on hand control
to lift the chair base to desired height.
Step 1:
A) Press Chair Up on hand control to raise chair height.
B) Insert Install Assist Tool legs into spline receptacles.
Install Assist Tool
For use with model 244,
630 (-010 thru -013 & -020 thru -023)
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
244630
Step 2: Press Chair Down on hand control
to lift the chair base to desired height.
Step 1:
A) Press Chair Up on hand control to raise chair height.
B) Insert Install Assist Tool legs into spline receptacles.
* For other languages please visit http://www.midmark.com/technical-library/medical.
** See User Guide for Caution and Warning Statements.
To remove Install Assist Tool legs...
A) Press Chair Up on hand control to lower chair base to floor or dolly.
B) Lift up on spline adapter release lever.
C) Slide Install Assist Tool legs from spline receptacles.
/