CAME XTS 5IP WH, XTS 5IP BK User manual

Brand: CAME

Model: XTS 5IP WH, XTS 5IP BK

Type: User manual

CAME XTS 5IP WH, XTS 5IP BK is a full-touch video intercom with a TFT five-inch touch-screen and Graphic User Interface. It enables you to answer calls from entry panels or other indoor receivers, make calls to other indoor receivers, entry panels, or contacts over the Wifi network, view a list of missed calls and video messages, activate auxiliary commands, and more.

Video intercoms for the IP360 system

XTS 5IP WH - XTS 5IP BK

USER MANUAL

English

FB00984-EN

p. 2 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

GENERAL PRECAUTIONS

• Carefully read the instructions before using the device.

• The installation, programming, commissioning and maintenance of the product must only be carried out by

qualiﬁed technicians, properly trained in compliance with the regulations in force, including health and safety

measures and the disposal of packaging.

• The equipment must be destined solely for the use for which it was expressly designed.

• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.

Maintenance and precautions when using the device

• Do not expose the LCD screen to direct sunlight.

• To clean, only use soft, dry, or slightly-moistened cloth rags. Do not use any chemicals.

• Do not block the air vents.

DESCRIPTION

Full-touch video intercom for the IP360 system, with TFT ﬁve-inch touch-screen, featuring Graphic User Interface.

Description of parts

1 Signaling LED

2 Loudspeaker

3 Touch-screen display

4 Microphone.

B C F G

p. 3 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Commands and notiﬁcations found on the home page

The appearance of the homepage may vary according to the system settings or the user interface.

A Command to exclude call ringer; when the com-

mand is active, the red LED is lit.

B The red LED means that the device's ringer is

turned off

C The blinking blue LED, when the screen is stand-

ing by, means that there are unseen messages or

missed calls

D Turns the answering service off or on

E Turn the automatic door opener on or off

This icon appears only if the automatic door

opener function is properly set up.

F The blinking icon means there are unseen mes-

sages or missed calls

G The white icon means that the device is working

properly and is ready to take any calls

H This button appears on all screens and is for re-

turning to the homepage

I This button appears on all screens and is for re-

turning to the previous page

J This button appears on all screens and is for ac-

cessing the information pages

K This activates the preset auxiliary command

L Preset door opener command

M HELP button; It sends a "panic alarm" notiﬁcation

to the assigned concierge,and shows the exten-

sion number

This button is featured in systems that require

a concierge service.

21:20 Thursday

15 Mar 2018

Favourites

Contacts

Entry panels

Video Recording

Info Back Home

p. 4 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

HOW TO USE THE DEVICE

Answering a call

An image of the caller appears on the screen. The audio from and towards the caller is turned o.

A Touch the button to answer the call and to turn on the audio communication.

B Touch the button to refute the call and to return to the homepage.

Options appearing on the screen during a conversation

C Call duration and state of the door

D Caller's ID.

Commands that are active during a conversation

E It turns on the electric lock of the shown entry panel.

F This opens the list of auxiliary commands conﬁgured for the shown entry panel; touch the name of the com-

mand that you want to send.

G Touch buttons + and - to adjust the audio volume.

H Turn o the microphone (mute function).

I Touch the button the start audio/video recording the current conversation.

A red light signal blinks next to the caller's ID during the recording.

The recording is automatically ended after 10 seconds.

J Touch and drag the image o the screen (or press the side arrows >) to view the entry panel or next/previous

analog video camera on the list, if any more are present; the current audio/video call is ended.

Call from Entry Panel

p. 5 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Making a call

This device lets you call other indoor receivers (intercommunication), any devices connected over the Wiﬁ network

or, any entry panels.

Calling a contact on the

favorites list

A Touch the icon to access the list

of favorite contacts.

To ﬁll the list of favorite con-

tacts, see the chapter "Contacts"

on page 7.

Select one of the listed contacts to

initiate a call.

Touch the icon to view con-

tact's details.

Touch the icon to remove the

contact form the list of favorites.

When communication is underway,

certain commands and information

appear on the screen, as men-

tioned before in the "Answering a

call" on page 4.

App 01 Call Mario's phone

Main Call

Intercom 1 Not home

Main Call

Porter

Main Call

IP unit

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

Favourites Entry panels

Contacts Video Recording

p. 6 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Turn on communication to

entry panel

B Touch the icon to access the list

of entry panels.

to ﬁll the list of entry panels,

see the "Contacts" on page 7.

Select one of the entry panels on

the list to initiate the call.

This opens the door associated

to the entry panel without initiating

a call.

Opens a pop-up containing a

list of auxiliary commands associ-

ated to the entry panel.

Touch the icon to view con-

tact's details.

Touch the icon to remove the

contact form the list of favorites.

When communication is underway,

certain commands and information

appear on the screen, as men-

tioned before in the "Answering a

call" on page 4.

MAIN ENTRANCE

EAST ENTRANCE

NORTH ENTRANCE

Info Back Home

21:20 Thursday

15 Mar 2018

Favourites Entry panels

Contacts Video Recording

Info Back Home

21:20 Thursday

15 Mar 2018

p. 7 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Contacts

Touch the icon to access the con-

tacts list.

The list contains all the devices that

can be contacted.

Commands associated with contacts

Opens the door associated to the entry panel.

Opens a pop-up containing a list of auxiliary commands associated to the entry panel.

Adds/removes the selected to and from the favorites list.

Adds/removes the selected to and from the entry panels list.

Types of contact

Household

Single User

Porter

Entry panel or analog video camera

Touch one of the listed items to access the window for viewing details on the selected contact and to customize

his or her name.

MAIN ENTRANCE

Home

Porter

EAST ENTRANCE

NORTH ENTRANCE

Info Back Home

21:20 Thursday

15 Mar 2018

Favourites Entry panels

Contacts Video Recording

Info Back Home

21:20 Thursday

15 Mar 2018

p. 8 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

IP unit

Mobile App 1

Mobile App 3

Mobile App 2

XTS receiver

Info Back Home

21:20 Thursday

15 Mar 2018

Entry panel

D Entry panel.

E Commands associated to an

entry panel.

Touch the contact to initiate the

call.

Intercom.

F Intercom contact.

Touch the contact to initiate the

call.

Concierge

G Concierge panel, if the system

features this.

Touch the contact to initiate the

call.

Unit

A Household (includes the indoor

receiver and any associated apps).

B the indoor receiver.

C Possible users connected to the

system via app, either locally or

from a remote location.

Touch the icon to add the con-

tact to the list of favorites.

Touch one of the contacts to initiate

a call.

Touch the button Back to return to

the previous screen.

EXTENSIONS

Main entry panel

Intercom 1

Porter

p. 9 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Video Recording

A Touch the icon the turn the an-

swering service on or o.

To properly set up the an-

swering service, see "Video Re-

cording" on page 16.

B The number with the red back-

ground is the number of unseen

video messages.

When the screen standing-by,

any unseen video messages, are

ﬂagged by the blinking, blue LED

ﬁtted on the frame.

Any unseen messages are high-

lighted.

Touch the wanted message to start

its playback.

Touch the icon to remove the

message from the list.

Touch the button Back to return to

the previous screen.

04 gen 2018 21:03

10s

03 gen 2018 17:33

10s

01 gen 2018 23:55

10s Delete all

Info Back Home

21:20 Thursday

15 Mar 2018

Favourites Entry panels

Contacts Video Recording

Main entry panel

WEST entry panel

EAST entry panel

Info Back Home

21:20 Thursday

15 Mar 2018

p. 10 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Aux List

A Touch the icon to access the list

of auxiliary contacts.

The auxiliary commands (AUX) let

you activate suitably programmed

contacts to carry out additional

commands to the classic opening

of the entry door.

To ﬁll the list of auxiliary con-

tacts, see the chapter "Aux set-

tings (auxiliary commands)" on

page 14.

Call register

A Touch the icon to access the call

history.

B The number with the red back-

ground is the number of missed

calls.

When the screen standing-by, any

missed calls are ﬂagged by the

blinking, blue LED ﬁtted on the

frame.

Types of calls

Incoming call.

Outgoing call.

Missed call.

Any missed calls are highlighted .

Touch the line you want to call your

contact.

Touch the icon to start replay-

ing the saved message.

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

Call register

Aux List

CCTV

Messages

Delete all

Main entry panel

WEST entry panel

Intercom 01

EAST entry panel

Info Back Home

21:20 Thursday

15 Mar 2018

Touch the icon to remove the message from the list.

Touch the button Back to return to the previous screen.

p. 11 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

CCTV

Touch the name of the wanted

command to activate its corre-

sponding contact.

Touch the icon to edit the

command name.

Touch the button Back to return to

the previous screen.

A Touch the icon to access the list

of available video cameras.

To ﬁll the list of IP video cam-

eras, see the "IP video cameras"

on page 16.

Select the IP video camera that you

want to view.

IP 01 Video camera IP 02 Video camera

Info Back Home

21:20 Thursday

15 Mar 2018

Call register Aux List

CCTV Messages

Info Back Home

21:20 Thursday

15 Mar 2018

Gate

EAST Entrance

Light

WEST Entrance

Info Back Home

21:20 Thursday

15 Mar 2018

p. 12 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Porter messages

A Touch the icon the view any

messages received from the porter.

Porter

Delivery for you

Porter

Power outage

Porter messages are grouped

by message subject.

Any unseen messages are high-

lighted.

Touch the line to view the messag-

es.

Touch the icon to remove the

message from the list.

Touch the button Back to return to

the previous screen.

Info Back Home

21:20 Thursday

15 Mar 2018

Call register Aux List

CCTV Messages

Delete all

Info Back Home

21:20 Thursday

15 Mar 2018

p. 13 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

GENERAL SETTINGS

Touch the icon to return to the list

of settings.

System information

This window gives technical infor-

mation that is useful for identifying

the device's characteristics and the

hardware and software versions.

Language

Choose the device interface lan-

guage from the drop-down menu.

Save the setting by touching the

Save button.

Save

Settings

Info Back Home

21:20 Thursday

15 Mar 2018

Quick commands

Auxiliary setting

System information

Language English

Date/time

Language

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

p. 14 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Date/time

C In this space provide the NTP server address through which the device will synchronize the date and time.

D When the A manual codeis activated, the pop-up window lets you manually set the current date and time.

E Select from the following lists the continent - state/city where the system is installed.

Save the setting by touching the Save button.

Touch the button Back to return to the list of conﬁgurable parameters.

This window is for setting the date

and time on the indoor receiver.

A The date and time are manually

set by the user.

B The date and time are auto-

matically synchronized by a corre-

sponding internet service; The net-

work connected to the device must

be able to link to the internet.

Selecting mode B activates the

section for NTP server settings.

Aux settings (auxiliary commands)

A touch the button to add a new

auxiliary command.

Save

The list is empty

Mode

NTP server

Date/Time

Continent

State/City

Manual Auto

Info Back Home

21:20 Thursday

15 Mar 2018

New Aux

Info Back Home

21:20 Thursday

15 Mar 2018

p. 15 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

B Touch the area to assign a name

to the AUX command that you are

going to add.

C Choose the command to asso-

ciate the AUX to, from the list.

D Choose the destination of the

AUX command from the list.

Save the setting by touching the

Save button.

The conﬁgured auxiliary commands

will ﬁll the list.

For editing the selected ele-

ment.

For eliminating the selected

element.

Touch the button Back to return to

the list of conﬁgurable parameters.

Save

New Aux

Delete all

Description

Pre-set door release

Gate opener

Entry panel

Garden lights

Entry panel

Gate opener

EAST Entrance

Command

Pre-set porter call

Aux 3

Main entrance

Destination

Preset Aux command

Entry panel

EAST ladder light

Quick commands

This window is for establishing

which commands will be executed

when pressing the buttons on the

left side of the home page.

A From the lists choose the desti-

nation of the commands.

Touch the button Back to return to

the list of conﬁgurable parameters.

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

p. 16 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

IP video cameras

A Touch the button to add a new

IP video camera.

Video Recording

If the system has a video intercom entry panel installed, if the called user is not in, the device lets the caller record

a video message.

The caller may be notiﬁed of this by a courtesy message, for example, "The user is not available at the moment,

please leave a message after the beep".

The video message, labelled with the time and date of the call, are stored. You can view it later by consulting video

voicemail.

A From the drop down menu,

select the ring time - expressed in

seconds - after which the automat-

ic recording is activated.

B Enable the courtesy message to

be played back.

C Button for recording and playing

back the courtesy message.

Save the setting by touching the

Save button.

Touch the button Back to return to

the list of conﬁgurable parameters.

Record message

Play message

Off

Courtesy message

Answer delay 5 seconds

Save

Info Back Home

21:20 Thursday

15 Mar 2018

The list is empty New

IP video camera

Info Back Home

21:20 Thursday

15 Mar 2018

p. 17 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

The added IP video cameras ﬁll the

list.

For editing the selected ele-

ment.

For eliminating the selected

element.

Touch the button Back to return to

the list of conﬁgurable parameters.

B Touch the area to assign a name

to the IP video camera that you are

going to add.

C Touch the area and type the

URI string for connecting the video

camera.

D Touch the area and type the URI

string for acquiring the static image

from the video camera, needed for

the preview.

The URI strings are shown in

the IP Video cameras' manual.

Save the setting by touching the

Save button.

Backdrops

Select your preferred backdrop;

the new settings is immediately

applied.

Touch the button Back to return to

the list of conﬁgurable parameters.

Description

Real-time URI connection

URI connection for the xed image

Save

Info Back Home

21:20 Thursday

15 Mar 2018

New

IP video camera

Delete all

IP 01 Video camera

IP 02 Video camera

Info Back Home

21:20 Thursday

15 Mar 2018

Background

Info Back Home

21:20 Thursday

15 Mar 2018

p. 18 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Display

Tones

A It adjusts the general volume of

the ringers for the video intercom

calls.

B Choose the tone to associate to

incoming calls from the drop-down

menu.

C From the drop down menu se-

lect the tone to associate to the call

from the landing.

A Adjusts the brightness of the

screen during use.

B Adjusts the brightness of the

screen in standby.

C This makes the screen insensi-

tive to the touch for 20 seconds, to

enable cleaning over it.

Touch the button Back to return to

the list of conﬁgurable parameters.

D With this function enabled, each touch on the screen is accompanied by a sound.

Touch the button Back to return to the list of conﬁgurable parameters.

Clean screen

Brightness

Volume

Ringing tone

Local doorbell tono

Touch sound

Brightness in stand-by

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

p. 19 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

Advanced settings

Network

SIP Settings

Automatic door opener

Conguring the user interface

Maintenance

Info Back Home

21:20 Thursday

15 Mar 2018

This section requires speciﬁc

know-how in operating the vid-

eo-intercom system. Wrong set-

tings may cause partial or even

total malfunctions; that is why

the editing of some parameters

is allowed only after entering the

installer password; the default

password is 112233).

Network

This section is for conﬁguring the

network connection.

Save

Info Back Home

21:20 Thursday

15 Mar 2018

Type of connection

Mode

IP address

Netmask

Gateway

DNS

MAC address

A Lets you choose the type of address from:

DHCP

The device's IP address is assigned by the DHCP server; if there are no special needs, this mode lets you

continue with the settings without adding any additional data.

Static

The device's IP address is manually assigned.

B IF you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of

the router and of the other connected devices.

C If the netmask is dierent from the default one, provide the proper netmask.

D Provide the default gateway for your network.

E Type the DNS from where the device acquires the correct time.

To save the setting press button F.

DHCP Static A

p. 20 - Manual FB00984-EN v. 1 - 04/2018- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.

SIP Settings

A In this space type the "SIP user

name" assigned by the PCS/XIP to

the device.

B In this space enter the pass-

word assigned in the Xip receiver

credentials in the server set-up

window.

C In this space enter the name

that you want to give to the device.

XIP server Generic None

Save

D In this space enter the server's IP address.

Example of CAME server IP addresses:

ETI/MiniSER Xip - 192.168.0.3 (port 0) - 192.168.1.3 (port 1)

ETI/SER Xip, 192.168.1.1

Serverless IP entry panel, 192.168.1.5

E Select the type of server to which the device is connected.

Username

Password ••••••

Display name User 01

Server address

Server type

Info Back Home

21:20 Thursday

15 Mar 2018

Info Back Home

21:20 Thursday

15 Mar 2018

Automatic door opener

This function, which is especially useful for businesses, lets you automatically open the entrance once the call-but-

ton is pressed on the entry panel. The activation of this function can be programmed to schedule time slots and

days of the week.

A Touch the button to add a new

time slot.

New

time-slot

The list is empty

Page is loading ...

CAME XTS 5IP WH, XTS 5IP BK User manual

CAME XTS 5IP WH, XTS 5IP BK User manual

CAME XTS 5IP WH, XTS 5IP BK User manual

Related papers

Other documents