CAME XTS 7 User manual

CAME
Brand
CAME
Model
XTS 7
Type
User manual

CAME XTS 7 is a full-touch speaker video intercom for the IP360 system that offers a wide range of features to enhance your home security and communication experience. With its 7" TFT touch screen display and Wi-Fi connectivity, you can enjoy crystal-clear video and audio calls, answer your door remotely, and monitor your property from anywhere.

CAME XTS 7 is a full-touch speaker video intercom for the IP360 system that offers a wide range of features to enhance your home security and communication experience. With its 7" TFT touch screen display and Wi-Fi connectivity, you can enjoy crystal-clear video and audio calls, answer your door remotely, and monitor your property from anywhere.

Handsfree entry phone for IP360 system
XTS 7IP WH WIFI
XTS 7IP BK WIFI
XTS 7IP WH WFBF
USER MANUAL
EN
E
n
g
l
i
sh
FA01683-EN
Page 2 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
GENERAL PRECAUTIONS
• Read the instructions carefully before beginning the installation and carry out the procedures as specifi ed by the
manufacturer. • Installation, programming, commissioning and maintenance must only be carried out by qualifi ed,
expert technicians and in full compliance with the applicable law. • Before carrying out any cleaning or maintenance,
disconnect the device from the power supply. • Only use this product for its intended purpose. Any other use is
hazardous. Came S.p.A. is not liable for any damage caused by improper, erroneous or unreasonable use. • Only
use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products. • Do not obstruct
the ventilation or heat dissipation vents or slots. • Do not expose the LCD screen to direct sunlight. • General
precautions for controlling the device remotely. • Some features of the system may be managed using smartphones
or tablets via the corresponding apps. • For the system to be remotely controlled, the device must be connected to
a home Wi-Fi network with internet access. • This type of system requires a high-quality Wi-Fi signal to the device
to function properly. • The smartphone or tablet running the app must not block VoIP apps.
Remotely controlling the device via the app means consuming your smartphone/tablet/home network’s data
tra c. The cost of this consumption is borne by the user.
• The product, in its original packaging supplied by the manufacturer, must only be transported in a closed environment
(railway carriage, containers, closed vehicles). • If the product malfunctions, stop using it and contact customer
services at https://www.came.com/global/en/contact-us or via the telephone number on the website.
The manufacture date is provided in the production batch printed on the product label. If necessary, contact
us at https://www.came.com/global/en/contact-us.
The general conditions of sale are given in the o cial CAME price lists.
Maintenance and precautions when using the device
• Do not expose the LCD screen to direct sunlight.
• To clean, only use soft, dry, or slightly-moistened cloth rags. Do not use any chemicals.
• Do not block the air vents.
LEGISLATIVE REFERENCES
This product complies with the applicable standards in force at the time of manufacturing.
RED
CAME S.p.A. declares that the product described in this manual complies with Directive 2014/53/EU and the
Radio Equipment Regulations 2017.
The full EC declaration of conformity and UK Conformity Assessed (UKCA) marking information can be found at
www.came.com.
CLEANING THE DEVICE
To clean the device, use a soft, slightly damp cloth only. Wet the cloth with water or an ammonia solution. Alternatively,
use an oil-based soap (e.g. Marseille soap) or a gentle makeup remover (e.g. a cleanser or micellar water).
Always wipe the surface with a damp cloth (wet with just water) after cleaning. Never use alcohol-based solutions or
solutions containing surfactants.
4
2
1
3
Page 3 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
1 Signaling LED
2 Speaker
3 Touch screen display
4 Microphone.
DESCRIPTION
Full-touch speaker video intercom for IP360 system, 7˝ TFT touch screen display, Wi-Fi and Graphical User
Interface.
Description of parts
DECOMMISSIONING AND DISPOSAL
Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force
in the country where the product is used. The recyclable components are marked with a symbol and the material's ID
marker.
THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY
TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING.
P
BCHGFIJ
E
D
A
O
N
K
LM
Page 4 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
A Command to exclude call ringer; when the
command is active, the red LED is lit.
B The red LED means that the device's ringer is
turned off
C The blinking blue LED, when the screen is
standing by, means that there are unseen
messages or missed calls
D Turns the answering service off or on
E Turn the automatic door opener on or off
This icon appears only if the automatic door
opener function is properly set up.
F The flashing icon indicates the presence of a
programming error
G The blinking icon means there are unseen
messages or missed calls
H The grey icon means that the device is enabled
for connecting to CAMEConnect; the white
icon means that the device is connected to
CAMEConnect.
I The white icon means that the device is working
properly and is ready to take any calls
J The icon means that the Wifi connection is active
and strong
K This button appears on all screens and is for
returning to the homepage
L This button appears on all screens and is for
returning to the previous page
M This button appears on all screens and is for
accessing the information pages
N This activates the preset auxiliary command
OPreset door opener command
P SOS button: pressed for at least 5 seconds, it
sends a "panic" alarm signal to the default porter,
showing the number of the calling extension.
This button is featured in systems that require
a concierge service.
Commands and notifi cations found on the home page
The appearance of the homepage may vary according to the system confi guration or the user interface.
B
B
E
E
C
C
F
F
D
D
G
G
H
H
I
I
J
J
K
K
K
K
A
A
Page 5 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Call from Entry Panel
An image of the caller appears on the screen. The audio from and towards the caller is turned o .
A Touch the button to answer the call and to turn on the audio communication.
B Touch the button to refute the call and to return to the homepage.
Options appearing on the screen during a conversation
C Call duration and door status.
D Caller's ID.
Commands that are active during a conversation
E It turns on the electric lock of the shown entry panel.
F This opens the list of auxiliary commands confi gured for the shown entry panel; touch the name of the
command that you want to send.
G It is used to adjust the audio volume of the conversation in progress.
H It turns o the microphone (mute function).
I Touch the button the start audio/video recording the current conversation.
A red light signal blinks next to the caller's ID during the recording.
The recording is automatically ended after 10 seconds.
J It is used to access to a list of CCTV cameras that can be viewed.
Select the camera you want to view; the audio and the door opener and auxiliary controls remain open to and from
the calling entry panel.
K Touch and drag the image on the screen (or press the lateral > arrows) to view the following/previous listed
entry panel or analog camera (if installed); the current audio/video call is ended.
HOW TO USE THE DEVICE
Answering a call
1
2
3
A
A
Page 6 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Concierge
Main Call
Intercom 2 Not home
Main Call
Intercom 1 Not home
App 01 Call Mario's phone
App 02 Lucia's phone number
Home
App 01 Mario's phone number
Home
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
When communication is underway,
certain commands and information
appear on the screen, as mentioned
before in the "Answering a call"
chapter on page 4.
Select one of the listed contacts to
initiate a call.
Touch the icon to view contact's
details.
Touch the icon to remove the
contact form the list of favorites.
Calling a contact on the
favorites list
A Touch the icon to access the list
of favorite contacts.
to fi ll the list of favorite
contacts, see the chapter called
"Contacts" on page .
Making a call
This device lets you call other indoor receivers (intercommunication), any devices connected over the Wifi network
or, any entry panels.
1
3
2
B
B
Page 7 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Secondary entry panel
Main entry panel
HomeBackInfo
19:02 Thursday
01 Feb 2018
Secondary entry panel
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
When communication is underway,
certain commands and information
appear on the screen, as mentioned
before in the "Answering a call"
chapter on page 4.
Select one of the listed entry panels
to initiate a call.
This opens the door associated
to the entry panel without initiating
a call.
Opens a pop-up containing
a list of auxiliary commands
associated to the entry panel.
Touch the icon to view contact's
details.
Touch the icon to remove the
contact from the list.
Turn on communication to
entry panel
B Touch the icon to access the list
of entry panels.
To fi ll the list of entry panels,
see the "Contacts" chapter on
page 7.
1
2
Page 8 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
NORTH entry panel
Home
EAST entry panel
Main entry panel
Concierge
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
The list contains all the devices that
can be contacted.
Touch the icon to access the
contacts list.
Contacts
Commands associated with contacts
Opens the door associated to the entry panel.
Opens a pop-up containing a list of auxiliary commands associated to the entry panel.
Adds/removes the selected to and from the favorites list.
Adds/removes the selected to and from the entry panels list.
Types of contact
Residential unit
Single User
Concierge
Entry panel
Analog video camera
Touch one of the listed items to access the window for viewing details on the selected contact and to customize
his or her name.
3
4
5
B
B
D
D
F
F
E
E
A
A
C
C
Page 9 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Home
Home
Home
Back
Back
Back
Info
Info
Info
Cellar XTS receiver
Mobile App 3
Attic XTS receiver
Mobile App 1
EXTENSIONS
XTS receiver
Concierge
Main entry panel
Home
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Unit
A Residential unit
B The indoor receiver.
C Devices belonging to the
residential unit.
Touch the icon to add the
contact to the list of favorites.
Touch one of the contacts to initiate
a call.
Touch the Back button to return to
the previous screen.
Concierge
F Concierge panel, if the system
features this.
Touch the contact to initiate the
call.
Entry panel
D Entry panel.
E Commands associated to an
entry panel.
Touch the contact to initiate the
call.
1
2
A
A
B
B
Page 10 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Delete all
Entry panel
Entry panel
01 Jan 2018 23:55
10s
03 Jan 2018 17:33
10s
04 Jan 2018 21:03
10s
Entry panel
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
A Touch the icon the turn the
answering service on or off.
To properly set up the
answering service, see the "Video
answering service" chapter on
page 16.
B The number with the red
background is the number of
unseen video messages.
When the screen standing-by,
any unseen video messages, are
fl agged by the blinking, blue LED
fi tted on the frame.
Any unseen messages are
highlighted.
Touch the wanted message to start
its playback.
Touch the icon to remove the
message from the list.
Touch the Back button to return to
the previous screen.
Video Recording
2
1
1
A
A
B
B
A
A
Page 11 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Light
Entry panel
Gate
Entry panel
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
HomeBackInfo
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Touch the name of the wanted
command to activate its
corresponding contact.
Touch the icon to edit the
command name.
Touch the Back button to return to
the previous screen.
A Touch the icon to access the call
history.
B The number with the red
background is the number of
missed calls.
When the screen standing-by, any
missed calls are fl agged by the
blinking, blue LED fi tted on the
frame.
Call register
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
A Touch the icon to access the list
of auxiliary contacts.
The auxiliary commands (AUX) let
you activate suitably programmed
contacts to carry out additional
commands to the classic opening
of the entry door.
To fi ll the list of auxiliary
contacts, see the chapter
called "Aux settings (auxiliary
commands)" on page 14.
Aux List
2
2
1
A
A
Page 12 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Touch the icon to remove the call from the list.
Touch the Back button to return to the previous screen.
HomeBackInfo
SettingsMessagesCCTV
19:02 Thursday
01 Feb 2018
Delete all
30 Jan 2017 15:45
0s
03 Jan 2018 16:31
0s
05 Jan 2018 14:21
0s
07 Jan 2018 21:03
0s
28 Jan 2018 11:23
0s
29 Jan 2018 19:55
0s
Concierge
Intercom 1
Entry panel
Entry panel
Entry panel
Entry panel
Home
Home
Back
Back
Info
Info
IP 04 Video cameraIP 03 Video camera
IP 02 Video cameraIP 01 Video camera
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Select the IP video camera that you
want to view.
A Touch the icon to access the list
of available video cameras.
To fi ll the list of IP cameras,
see the "IP Cameras" chapter on
page 16.
Types of calls
Incoming call.
Outgoing call.
Missed call.
Any missed calls are highlighted .
Touch the line you want to call your
contact.
Touch the icon to start the
saved message playback.
CCTV
2
3
1
B
B
C
C
A
A
Page 13 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Reply to a message
Touch the green area to activate the
keyboard on which to compose the
message.
C Touch the button to send the
message.
01 Feb 19:00
01 Feb 14:58
28 Jan 2018 11:23
01 Feb 2018 14:58
1/1
Sunday I will be absent, please reset the counter if necessary
Please note that due to maintenance work electric
power cut off may occur on next Sunday from 8:00 am
to 10:00 am.
New message
Compose message
Concierge - Electric power cut off
Delete all
Messages from the concierge
are grouped by conversation
subject.
Any unseen messages are
highlighted.
Touch the icon to remove the
message from the list.
Touch the line you want to view the
conversation.
Home
Home
Back
Back
Info
Info
Concierge
Mail delivery
Concierge
Electric power cut off
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
HomeBackInfo
SettingsMessagesCCTV
19:02 Thursday
01 Feb 2018
This function allows you to receive
or send messages to the concierge.
A Touch the icon to display
the messages received by the
concierge.
Messages
4
D
D
E
E
F
F
Page 14 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Compose a new message
B Touch the button to start a new
conversation with the concierge.
D Indicate the subject of the
conversation.
E Choose the recipient.
F Proceed with the composition of
the message.
A:
Continuous
Concierge
Mail delivery
Subject:
SettingsCCTV
Home
Home
Back
Back
Info
Info
IP video cameras
Auxiliary setting
Video Recording
Quick commands
Date/time
Language
System information
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
This window gives technical
information that is useful
for identifying the device's
characteristics and the hardware
and software versions.
System information
Touch the icon to return to the list
of settings.
GENERAL SETTINGS
HomeBackInfo
19:02 Thursday
01 Feb 2018
E
E
F
F
G
G
A
A
C
C
B
B
D
D
Page 15 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
State/City
Continent
01 F
01 F
e
eb 2
018
8
19
2
Date/Time
NTP server
Auto mode
Mode
HomeBack
NTP
Auto
System
Manual
Save
Info
19:02 Thursday
01 Feb 2018
This window is for setting the date
and time on the indoor receiver.
A The date and time are manually
set by the user.
B Date and time are synchronized
automatically.
The network to which the
device is connected must be able
to access the internet.
Choosing mode B, you can specify the source of the automatic date and time.
C Date and time are automatically synchronized with the system server (or master).
D The date and time are automatically synchronized by a corresponding internet service (NTP server).
E In this space provide the NTP server address through which the device will synchronize the date and time.
F When the manual mode is activated (A), the pop-up window lets you manually set the current date and time.
G Select from the following lists, continent - state/city where the system is installed, for a correct management
of the time zone and the summer time.
Save the setting by touching the Save button.
Touch the Back button to return to the list of confi gurable parameters.
Date/time
HomeBack
Save
Info
EnglishLanguage
19:02 Thursday
01 Feb 2018
Choose the device interface
language from the drop-down
menu.
Save the setting by touching the
Save button.
Language
1
2
3
A
A
B
B
C
C
D
D
Page 16 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Entry panelDestination
Aux 3Command
Gate opener
Garden lights
Entry panel
Gate opener
Entry panel
Description
Delete all
Delete all
New Aux
New Aux
Home
Home
Back
Back
Save
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
The auxiliary commands will fi ll the
list.
For editing the selected
element.
For eliminating the selected
element.
Touch the Back button to return to
the list of confi gurable parameters.
B Touch the area to assign a name
to the AUX command that you are
going to add.
C Choose the command to
associate the AUX to, from the list.
D Choose the destination of the
AUX command from the list.
Save the setting by touching the
Save button.
The list is empty
HomeBackInfo
19:02 Thursday
01 Feb 2018
A Touch the button to add a new
auxiliary command.
Aux settings (auxiliary commands)
B
B
A
A
C
C
A
A
Page 17 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Save
5Answer delay
Courtesy message Off
Play message
Record message
On
HomeBackInfo
19:02 Thursday
01 Feb 2018
A From the drop down menu,
select the ring time - expressed in
seconds - after which the automatic
recording is activated.
B Enable the courtesy message to
be played back.
C Button for recording and playing
back the courtesy message.
Save the setting by touching the
Save button.
Touch the Back button to return to
the list of confi gurable parameters.
Video Recording
If the system has a video intercom entry panel installed, if the called user is not in, the device lets the caller record
a video message.
The caller may be notifi ed of this by a courtesy message, for example, "The user is not available at the moment,
please leave a message after the beep".
The video message, labelled with the time and date of the call, are stored. You can view it later by consulting video
voicemail.
EAST EntrancePre-set door release
Main conciergeDefault concierge call
EAST stairwell lightPreset Aux command
HomeBackInfo
19:02 Thursday
01 Feb 2018
This window is used to determine
which commands are executed by
pressing the buttons on the left side
of the home page.
A Choose the destination of the
controls from the lists.
Touch the Back button to return to
the list of confi gurable parameters.
Quick commands
1
2
3
A
A
B
B
C
C
D
D
Page 18 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Delete all
Delete all
New video camera
URI for the fi xed image
URI for real-time
connection
IP 04 Video camera
IP 03 Video camera
IP 02 Video camera
IP 01 Video camera
Description
Home
Home
Back
Back
Save
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
B Touch the area to assign a name
to the IP video camera that you are
going to add.
C Touch the area and type the
URI string for connecting the video
camera.
D Touch the area and type the URI
string for acquiring the static image
from the video camera, needed for
the preview.
The URI strings are indicated
in the IP cameras manual.
Save the setting by touching the
Save button.
The added IP video cameras fi ll the
list.
For editing the selected
element.
For eliminating the selected
element.
Touch the Back button to return to
the list of confi gurable parameters.
The list is empty
New video camera
HomeBackInfo
19:02 Thursday
01 Feb 2018
A Touch the button to add a new
IP video camera.
IP cameras
A
A
B
B
C
C
A
A
B
B
C
C
D
D
A
A
B
B
C
C
D
D
Page 19 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Brightness in stand-by
Touch sound
Local doorbell tone
Ringing tone
Volume
Brightness
Clean screen
Home
Home
Back
Back
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
D With this function enabled, each touch on the screen is accompanied by a sound.
Touch the Back button to return to the list of confi gurable parameters.
A Adjusts the brightness of the
screen during use.
B Adjusts the brightness of the
screen saver when the screen is in
stand-by mode.
C This makes the screen
insensitive to the touch for 20
seconds, to enable cleaning over it.
Touch the Back button to return to
the list of confi gurable parameters.
A It adjusts the general volume of
the ringers for the video intercom
calls.
B Choose the tone to associate to
incoming calls from the drop-down
menu.
C From the drop down menu
select the tone to associate to the
call from the landing.
Tones
Display
Background
HomeBackInfo
19:02 Thursday
01 Feb 2018
Select your preferred backdrop;;
the new confi guration is applied
immediately.
Touch the Back button to return to
the list of confi gurable parameters.
Backdrops
1
2
A
A
B
B
C
C
D
D
E
E
F
F
G
G
Page 20 - Manual FA01683-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
D Lets you choose the type of
address from:
DHCP
The device's IP address is
assigned by the DHCP server; if
there are no special needs, this
mode lets you continue with
the settings without adding any
additional data.
Ethernet connection confi guration
HomeBackInfo
19:02 Thursday
01 Feb 2018
DHCP
Save
Save
Static
MAC address
Gateway
Netmask
IP address
Mode
EtheEthe
rnet
rnet
Type of connection
HomeBackInfo
19:02 Thursday
01 Feb 2018
Enabled
Enabled
Ethernet
SaveSave
Confi gure WiFi
Confi gure Ethernet
Disabled
Disabled
WiFi
DNS
Default gateway
Wireless
Ethernet
This section is used to determine
how the device connects to the
network.
A Enable/disable the desired
connection types
B Indicate whether the connection
to the gateway take place over the
Ethernet network or through Wi-Fi.
C Enter a valid DNS address to
have the CAMEConnect connection
(for example, 8.8.8.8.).
Network
On slave receiverOn master receiver
Automatic door opener
SIP Settings
CAME Connect
NetworkNetwork
Maintenance
Maintenance
Confi guring the user interface
Automatic door opener Confi guring the user interface
Credentials
19:02 Thursday
01 Feb
19:02 Thursday
01 Feb
Advanced settings
This section requires specifi c
know-how in operating the video-
intercom system. Wrong settings
may cause partial or even total
malfunctions; that is why the
editing of some parameters is
allowed only after entering the
installer password; the default
password is 112233).
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

CAME XTS 7 User manual

CAME
Brand
CAME
Model
XTS 7
Type
User manual

CAME XTS 7 is a full-touch speaker video intercom for the IP360 system that offers a wide range of features to enhance your home security and communication experience. With its 7" TFT touch screen display and Wi-Fi connectivity, you can enjoy crystal-clear video and audio calls, answer your door remotely, and monitor your property from anywhere.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents