2. Ghent
  3. CMD7438-G

Ghent CMD7438-G, CMD7438-GT Installation guide

  • Hello! I've reviewed the instruction sheet for the Ghent Clear Mobile Divider. This document outlines the steps for assembling the divider, including attaching the feet and casters to the clear panel. I'm ready to help with any questions you have about this process or the device's features.
  • How many people are needed to place the panel onto a table?
    What is included in the package?
    How many locking casters do each foot has ?
C
Clear Mobile Divider
Instruction Sheet
Step 1:
Remove and unpack the clear panel, feet, casters, and hardware.
Step 2:
With the assistance of two (2) people, place the panel onto a sturdy table.
Step 3:
Assemble foot:
- Insert end caps into ends.
- Insert casters into each foot, ensuring each foot has a locking caster.
Step 4:
Install the foot assembly onto the clear panel as shown, tighten hardware accordingly.
Repeat on other side.
IS-CMD 4/20
(1)
Clear
Panel
(2)
Foot
Assemblies
(2)
Non-Locking
Casters
(2)
Locking
Casters
(4)
End Caps/
Connector
(1)
Allen
Wrench
(4)
5/16-18"
Tee Nuts
(4)
5/16"
Flat
Washers
(4)
Screws
5/16-18 x 1/2"
button head cap screw
www.ghent.com/install - Lebanon, OH 800-543-0550
Flat side of nut
towards foot
plate.
DO NOT
TIGHTEN.
Step 5:
Recycle all packaging materials in accordance with local regulations.
Align tee nuts with
frame slot, push foot
assembly until foot
contacts the frame.
/