Ghent CMD7438-G Installation guide

Brand
Ghent
Model
CMD7438-G
Type
Installation guide

This manual is also suitable for

C
Clear Mobile Divider
Instruction Sheet
Step 1:
Remove and unpack the clear panel, feet, casters, and hardware.
Step 2:
With the assistance of two (2) people, place the panel onto a sturdy table.
Step 3:
Assemble foot:
- Insert end caps into ends.
- Insert casters into each foot, ensuring each foot has a locking caster.
Step 4:
Install the foot assembly onto the clear panel as shown, tighten hardware accordingly.
Repeat on other side.
IS-CMD 4/20
(1)
Clear
Panel
(2)
Foot
Assemblies
(2)
Non-Locking
Casters
(2)
Locking
Casters
(4)
End Caps/
Connector
(1)
Allen
Wrench
(4)
5/16-18"
Tee Nuts
(4)
5/16"
Flat
Washers
(4)
Screws
5/16-18 x 1/2"
button head cap screw
www.ghent.com/install - Lebanon, OH 800-543-0550
Flat side of nut
towards foot
plate.
DO NOT
TIGHTEN.
Step 5:
Recycle all packaging materials in accordance with local regulations.
Align tee nuts with
frame slot, push foot
assembly until foot
contacts the frame.
  • Page 1 1

Ghent CMD7438-G Installation guide

Brand
Ghent
Model
CMD7438-G
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents