2. American Standard
  3. 0298001.222

American Standard 0298001.222 Specification

  • Hello! I am an AI chatbot trained to assist you with the American Standard 0298001.222 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J95
© 2018 AS America Inc.
TOWN SQUARE
®
S
ABOVE COUNTER
VANITY SINK and OPTIONAL FURNITURE
VITREOUS CHINA
spec_0298008 Town Square S vanity sink 4/18
TOWN SQUARE
®
S ABOVE COUNTER VANITY SINK
and OPTIONAL FURNITURE
❏ 0298008 Faucet holes on 8" (203mm) centers
❏ 0298001 Faucet holes - center hole only
•Vitreouschina
•Rectangularabovecountervanitysink
•Rearoverow
•DesigncoordinateswithTown Square
®
S Collection
•Suppliedwithcut-outtemplate
•Sinkcanbeusedwithwashstandfurniture
Bowl size:
17-3/8"(442mm)wide
12"(305mm)front-to-back
4-5/8"(118mm)deep
Nominal Dimensions:
Above Counter Vanity Sink Only:
31" x 22-1/2" (787 x 571 mm)
Above Counter Vanity Sink and Furniture Combinations:
31" x 22-1/2" x 35" (787 x 571 x 889 mm)
❏ 9056030 Washstandlesstowelbar
❏ 3829000Towelbarforwashstand
❏ 7720018Optionaldecorativep-trapdrain
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 34" (864mm) from finished floor.
Lavatory installed 1-1/2" (38mm) minimum from front edge
of countertop provides 27" (686mm) knee clearance area.
BARRIER FREE
SEEREVERSEFORROUGHING-INDIMENSIONS
To Be Specied:
❏ Chinaware Color: ❏ White ❏ Linen
❏WashstandFinish:❏ White ❏DarkCherry
❏WashstandTowelBarFinish:❏ Chrome ❏BrushedNickel
❏ Faucet:*
❏ Supplies:
❏ P-Trap Finish: ❏ Chrome ❏BrushedNickel
*SeeTownSquareSfaucetsectionformodelsavailable
Notcompliantwhenusedwithoptionalfurniture.
Town Square S vanity sink 0298008
shown with 9056030 washstand and
3829000 towel bar
J96
© 2018 AS America Inc.
spec_0298008 Town Square S vanity sink 4/18
NOTES:
*
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P"TRAPARESUGGESTED.
FITTINGSNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
FORCOUNTERTOPCUTOUTANDINSTALLATIONINSTRUCTIONSUSETEMPLATESUPPLIEDWITHSINK.
FURNITURESPECIFICINSTRUCTIONSSUPPLIEDWITHOPTIONALFURNITURE.
IMPORTANT:DimensionsofxturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.
TOWN SQUARE
®
S
ABOVE COUNTER
VANITY SINK and OPTIONAL FURNITURE
VITREOUS CHINA
BARRIER FREE
31"
(787 mm)
35"
(889 mm)
23-5/16"
(592 mm)
10-15/16"
(277 mm)
25-9/16"
(650 mm)
*
8"
(203 mm)
SUPPLY
AS REQ’D
18-1/8"
(460 mm)
22-3/8"
(568 mm)
31"
(787 mm)
FAUCET MOUNTING HOLES:
SINGLE HOLE OR 8" (203 mm)
19"
(482 mm)
2-3/4"
(70 mm)
*
24"
(610 mm)
9-13/16"
(250 mm)
22-1/2"
(571 mm)
1-1/4" O.D. WASTE
1-1/4" O.D. TAILPIECE
FINISHED FLOOR
31"
(787mm)
SUGGESTED
*
12-7/8"
327mm
*
10-3/4"
273mm
SUGGESTED ADA INSTALLATION
BARRIER
FREE
CLEARANCE
25" MAX
(635mm)
34" MAX
(864mm)
1-1/2"
(38mm)
9" MIN
(229mm)
6" MAX
(152mm)
27" MIN
(686mm)
COUNTER TOP
8" MIN
(205mm)
11" MIN
(280mm)
13/16"
(20 mm)
5-7/16"
(138 mm)
7"
(178 mm)
VANITY TOP VIEW
VANITY WITH
WASHSTAND
VANITY WITH COUNTER
/