J19
© 2008 AS America Inc.
MORNING™
ABOVE-COUNTER SINK
VITREOUS CHINA
MORNING™ ABOVE-COUNTER SINK
❏ 0670.000
• Versatile sink shape for
above-counter installation
• Made from vitreous china
• Integral faucet deck for single-control
faucet mounting
• Center drain outlet without overow
❏ 0670.312 Same as above with front overow
Nominal Dimensions:
451mm (17-3/4") Round
Bowl sizes:
381mm (15") round
108mm (4-1/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED WALL
OR SPLASHBACK
COUNTERTOP
CUTOUT 330mm
(13) DIA.
OPTIONAL
*
165mm
(6-1/2)
83mm
(3-1/4)
76mm
(3)
SEALING
COMPOUND
*
260mm
(8-3/4)
178mm
(7)
203mm
(8)
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
COUNTERTOP
(BY OTHERS)
35mm
(1-3/8) DIA. HOLE
225mm
(8-7/8)
86mm
(3-3/8)
C/L
451mm
(17-3/4)
FINISHED
FLOOR
787mm
(31)
Revised 2/08
