J38
© 2008 AS America Inc.
31"
(787mm)
SUGGESTED
33-1/4"
(845mm)
7"
(178mm)
18-3/8"
(467mm)
23-1/2"
(597mm)
FINISHED WALL
OR SPLASHBACK
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*10-3/4"
(273mm)
*12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
3/4"
(19mm)
7-3/4"
(197mm)
OPTIONAL
SUPPLIES
AS REQ'D
2-3/4"
(70mm)
8"
(203mm)
8"
(203mm)
845mm
(33-1/4)
51mm
(2)
610mm
(24)
152mm
(6)
MAX.
BARRIER FREE
CLEARANCE
686mm
(27)
MIN.
203mm
(8)
MIN.
229mm
(9)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
PIAZZA™
COUNTERTOP SINK
VITREOUS CHINA
PIAZZA™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Large faucet deck and generous bowl
• Front overow
❏ 0478.403 Faucet holes on 4" (203mm) centers
❏ 0478.803 Faucet holes on 8" (102mm) centers
(illustrated)
❏ 0478.001 center hole only
Nominal Dimensions:
23-1/2" x 18-3/8"
(597 x 467mm)
Bowl sizes:
18-1/2" (470mm) wide
11-3/4" (299mm) front to back
6-1/2" (165mm) deep
Compliance Certications -
Meets or Exceeds the
Following Specications:
• ASME A112.19.2M for
Vitreous China Fixtures
• CAN/CSA B45 series
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance.
Revised 2/08
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided pages.
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available