Troy-Bilt CS 4325 Installation guide

Brand: Troy-Bilt

Model: CS 4325

Type: Installation guide

This manual is also suitable for

Chute

Deflector

Spring

Latch

Knobs

Chipper

Chute

Lock Rod

A. Pivot the spring latch

upward, if equipped.

B. Pivot chipper chute

down until it clicks

into the lock rod, if

equipped.

A. Place opening of bag completely over

chute deflector and knobs.

B. Pull the drawstrap until the bag is tight

around chute deflector opening.

(Model Series CS 4325 Only)

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

Fill fuel tank with gasoline purchased

within the last 10 days and stored in a

non-rusty/dirty can. Do not fill above

base of fuel tank neck.

Move throttle control into the

Fast position.

Pour the entire contents of the

oil bottle (included in carton)

into the oil fill.

Move the choke control

into the Choke position.

Grasp starter rope handle

and pull with quick, full-arm stroke.

When engine starts, slowly move choke

control into the Run position.

Gas Cap

Throttle

Control

Starter Rope

Handle

Choke

Control

Long Oil Fill

(If Equipped)

Standard Oil

Fill

(If Equipped)

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

Troy-Bilt CS 4325 Installation guide

Brand: Troy-Bilt

Model: CS 4325

Type: Installation guide

This manual is also suitable for

Download PDF

report

Troy-Bilt CS 4325 Installation guide

This manual is also suitable for

Troy-Bilt CS 4325 Installation guide

Related papers

Other documents