Troy-Bilt 24B412J711 Installation guide

Type
Installation guide

This manual is also suitable for

778-13013B© 2016 24B-424M, 24B-412J
Chute
Deflector
Spring
Latch
Knobs
Chipper
Chute
Lock Rod
A. Pivot the spring latch
upward, if equipped.
B. Pivot chipper chute
down until it clicks
into the lock rod, if
equipped.
B
A. Place opening of bag completely over
chute deflector and knobs.
B. Pull the drawstrap until the bag is tight
around chute deflector opening.
A
B
A
(Model Series CS 4325 Only)
1
2
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
778-13013B© 2016 24B-424M, 24B-412J
Fill fuel tank with gasoline purchased
within the last 10 days and stored in a
non-rusty/dirty can. Do not fill above
base of fuel tank neck.
Move throttle control into the
Fast position.
Pour the entire contents of the
oil bottle (included in carton)
into the oil fill.
Move the choke control
into the Choke position.
Grasp starter rope handle
and pull with quick, full-arm stroke.
When engine starts, slowly move choke
control into the Run position.
Gas Cap
Throttle
Control
Starter Rope
Handle
Choke
Control
Long Oil Fill
(If Equipped)
Standard Oil
Fill
(If Equipped)
3
6
4
7
5
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 24B412J711 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI