Amerimax Home Products 5404900042 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Amerimax Home Products 5404900042 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Amerimax
Amerimax Home Products, Inc.
P. O Box 4515
450 Richardson Drive
Lancaster, Pennsylvania 17604-4515
(717) 299-3711
a Euramax company
Deck Ledger Flashing 8’
Metal deck ledger flashing is used to cover the deck ledger board to protect it
from rotting. The ledger board is a critical structural element that connects the
deck to the house. Collapsed decks are often caused by ledger board failure.
To install the deck ledger flashing:
Slip the deck ledger flashing under the siding and over the deck ledger
board all along the deck facing.
Nail the deck ledger flashing to the wall set near the top edge of the
flashing with galvanized nails. Space the nails about 4 feet apart. This will
help prevent leaking and wood rot of the deck ledger board.
If your deck is longer than 8 feet, overlap the flashing 4 to 6 inches.
Use asphalt paper between metal and pressure-treated lumber to avoid
any chemical reaction.
/