Specication Bulletin No. 301
Cop-R-Shield PC
®
Cop-R-Shield PC
® | Laminated Copper Deck Ledger Flashing
DESCRIPTION
Cop-R-Shield PC is a non-asphaltic copper ashing
specically designed for deck construction and termite
shield protection. Advanced Building Products uses
a durable 5 mil. poly laminated to either a 2 oz. or 3
oz. piece of copper. The copper and poly technology
gives our ashing superior tensile strength, puncture
resistance, and self-sealing capabilities.
BENEFITS
» UV resistant for the life of the structure
» Used on deck applications, window sills and other
openings
» Easy to form on-site
» Two layers of self-sealing protection
» Compatible with all ACQ pressure treated wood
» Perma-Lam technology allows protection from
corrosion
FEATURES
Cop-R-Shield PC is a permanent, premium quality
laminated thru-wall ashing consisting of three (3) layers
of time proven waterproong materials combined under
heat and pressure into a single sheet. It is exible and is
easily formed by hand at the jobsite.
SPECIAL REQUIREMENTS
All materials specied shall be delivered to the site in
approved manufacturer’s sealed containers bearing
manufacturer’s name and material identication.
INSTALLATION
When installing Cop-R-Shield PC at a deck ledger
location, extend the ashing a minimum of 5 inches up
the exterior wall and under the weather resistant barrier.
Flashing should also extend across the width of the
ledger board and down the vertical face of the board
prior to attaching the deck support joists and hardware.
Flashing should be installed with corrosion resistant
staples or nails.
ADVANCED BUILDING PRODUCTS INC.
Phone: 800-252-2306
Fax: 207-490-2998
info@abp-1.com
www.advancedbuildingproducts.com
/
