3030 Corporate Grove Dr.

Hudsonville, MI 49426

Phone: 616.396.1355

itc-us.com

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.

*Disconnect power before installing, adding or changing any component.

*To avoid a hazard to children, account for all parts and destroy all packing materials.

*Use only with UL approved power supply.

*http://www.3m.com/3M/en_US/bonding-and-assembly-us/resources/full-story/?story-

Part#: 69D25X-XX

For warranty information please visit www.itc-us.com/warranty-return-policy

DOC #: 710-00034 • Rev B • 06/26/23

Page 1 of 1

PARTS/TOOLS NEEDED:

3. The switch is at the end of the lamp. Press to turn light on. To use the dimming function, press and hold the switch in. It will dim to

its lowest cycle and then start to brighten again. Release the switch when the light intensity is at the desired level.