ITC 69D25X-XX User manual

69D25X-XX
ITC
Brand
ITC
Model
69D25X-XX
Type
User manual

ITC 69D25X-XX is a versatile undercabinet light suitable for various installations, offering flexible mounting options and dimming functionality. With its magnetic end, it can easily attach to metal surfaces, while the clamp mount allows for installation on desks or other objects. The included wire management clips help keep the cord organized and out of the way. The light features a dimming function, allowing you to adjust the brightness to your desired level by pressing and holding the switch.

ITC 69D25X-XX is a versatile undercabinet light suitable for various installations, offering flexible mounting options and dimming functionality. With its magnetic end, it can easily attach to metal surfaces, while the clamp mount allows for installation on desks or other objects. The included wire management clips help keep the cord organized and out of the way. The light features a dimming function, allowing you to adjust the brightness to your desired level by pressing and holding the switch.

3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
*Disconnect power before installing, adding or changing any component.
*To avoid a hazard to children, account for all parts and destroy all packing materials.
*Use only with UL approved power supply.
Metal Overhead Installation:
If installing on a metal overhead, first determine installation
location and simply attach the light to the overhead using the
magnet end.
*http://www.3m.com/3M/en_US/bonding-and-assembly-us/resources/full-story/?story-
id=b3996cbd-9954-455f-8e72-88e452ca38c0
2. Plug the connector on the power supply cord into the connec-
tor attached to the light.
1. Wood Overhead Installation:
Clean the mounting surface with a 50/50 mixture of alcohol
and water prior to installation. For more detailed instructions
please refer to the 3M website*.
The light will come with the mounting plates already attached
to the light, simply remove the tape backing and press in
place. For added security, remove light from metal mounting
plate and screw mounting plate to overhead.
3. To install the wire management clips slide the cord into the
clip and turn 90° to ensure the cord will stay in place. Then
determine installation location and install by removing the
paper backing and pressing in place.
INSTALLATION INSTRUCTIONS
Rana Undercabinet
Light
Part#: 69D25X-XX
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00034 • Rev A • 10/18/18
Page 1 of 1
PARTS/TOOLS NEEDED:
Rana Light Power Supply Mounting Plate w/ Screw
(Wood installation only)
Wire Management
Clip Power Drill
Clamp Mount Installation:
Turn the knob counter-clockwise (left) to loosen the clamp.
Place clamp in desired location and turn knob clockwise
(right) to tighten on to desk.
4. The switch is at the end of the lamp. Press to turn light on. To
use the dimming function, press and hold the switch in. It will
dim to its lowest cycle and then start to brighten again. Re-
lease the switch when the light intensity is at the desired level.
  • Page 1 1

ITC 69D25X-XX User manual

69D25X-XX
ITC
Brand
ITC
Model
69D25X-XX
Type
User manual

ITC 69D25X-XX is a versatile undercabinet light suitable for various installations, offering flexible mounting options and dimming functionality. With its magnetic end, it can easily attach to metal surfaces, while the clamp mount allows for installation on desks or other objects. The included wire management clips help keep the cord organized and out of the way. The light features a dimming function, allowing you to adjust the brightness to your desired level by pressing and holding the switch.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents