ENTRO A0200SSSM User manual

A0200SSSM
Brand
ENTRO
Model
A0200SSSM
Type
User manual

ENTRO A0200SSSM is a mortice deadlock designed for use on both right-handed and left-handed doors, offering a high level of security for your home or office. It features a robust construction, a sleek stainless steel finish, and a user-friendly design that allows for easy installation and operation.

ENTRO A0200SSSM is a mortice deadlock designed for use on both right-handed and left-handed doors, offering a high level of security for your home or office. It features a robust construction, a sleek stainless steel finish, and a user-friendly design that allows for easy installation and operation.

INSTALLATION OF LOCK AND CYLINDER
1. Remove plastic cylinder cover cap with small flat blade
screwdriver.
2. Install lock in mortice and insert cylinder.
3. Insert retaining pin to secure cylinder-ensure pin is flush
with front plate.
4. Install face plate with two metal thread screws provided.
A0200SSSM / A0300SSSM MORTICE DEADLOCK
Installation Instructions
www.entro.com.au
NOTE:
Case does not need to be opened
at any time to change function
or handling of this lock.
HANDING OF DOOR - BRITISH STANDARDS
RIGHT-HAND DOOR LEFT-HAND DOOR
OUTSIDE DOOR
OPENING
IN
OUTSIDE DOOR
OPENING
IN
OUTSIDE DOOR
OPENING
OUT
OUTSIDE DOOR
OPENING
OUT
1. Determine center line and height of installation on door.
2.
Place template on door and align with center line, mark out
cylinder holes and mortice cavity. Drill mortice cavity and
cylinder holes to desired depth.
3.
Clean out mortice and insert lock case to check desired cavity size.
4.
Mark around front plate for face plate recess. Remove lock case
from cavity and cut recess for face plate. Face plate must be
flush with the door.
5.
Clean out cavity and install lock case and cylinders.
MORTICE INSTRUCTIONS
STRIKE INSTALLATION
A0200SSSM / A0300SSSM MORTICE DEADLOCK Installation Instructions
Detail "A"
Locking Status
Indicator
FRONT VIEW
SIDE VIEW 22mm Min.
40mm
52mm
SLIDING DOOR
OUTSIDE
RIGHT HAND
OUTSIDE
LEFT HAND NOTE:
REMOVE LOCK FROM DOOR BEFORE DRILLING
1. Mark out frame for strike and strike box if applicable.
2. Cut out recess in door frame for flush installation.
3. Install strike with screws provided.
GUARANTEE
This product is guaranteed against defects in workmanship and
materials subject to fair wear and tear for a minimum period of
two years from date of installation and assumes no liability for any
of the following:
• Improper installation or failure to follow installation instructions.
• Failure due to improper maintenance.
• Indirect or inconsequential loss or damage.
• Cost of removal and/or replacement.
• Cost of freight and/or traveling time.
Strike Box Strike
Cylinder
Retaining
Pin
  • Page 1 1

ENTRO A0200SSSM User manual

A0200SSSM
Brand
ENTRO
Model
A0200SSSM
Type
User manual

ENTRO A0200SSSM is a mortice deadlock designed for use on both right-handed and left-handed doors, offering a high level of security for your home or office. It features a robust construction, a sleek stainless steel finish, and a user-friendly design that allows for easy installation and operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents