Andersen Lock Lever Replacement Service Instructions

Type
Service Instructions
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
9069222 BA Revised 06/20/13
Tools Needed Herramientas necesarias
Safety Glasses Lentes de seguridad
Drill/Driver Drill/Driver
#2 Phillips Bit #2 Phillips Bit
Lock Lever Replacement
for E-Series Push Out Casement Windows
for E-Series/Eagle® Push Out Casement Windows
Parts Included Partes incluidas
(1) Lock Lever Lock Lever
Lock Lever
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com.
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com
Deje esta guía con el dueño de la construcción.
Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Consulte los códigos locales de construcción para identicar y conrmar que se cumplan los requisitos del código de construcción.
Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
Unlock and open sash.
Unlock and open sash.
Position replacement lock lever tight to sash.
Position replacement lock lever tight to sash.
Remove lock lever screws and save for reuse.
Remove lock lever screws using a drill/driver
and save for reuse.
Lock lever replacement is complete.
Lock lever replacement is completed.
2
9069222
Remove lock lever and dispose of properly.
Remove lock lever and dispose of properly.
Fasten lock using saved screws.
Fasten lock using saved screws.
Drill/Driver
Lock Lever
Screws
Lock Lever
Close and lock sash.
Close and lock sash.
1
Interior
2
Interior
3
Interior
4
Interior
6
Interior
5
Interior
  • Page 1 1
  • Page 2 2

Andersen Lock Lever Replacement Service Instructions

Type
Service Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages