WINSOON GCM2728 Installation guide

Installation Manual

Barn Door Hardware

www.winsoonhardware.com

1

Track Accessories

Single Door Hardware Kit Includes

Part Name

5FT4FT

6FT 6.6FT7.5FT 8FT 9FT 11FT10FT 12FT 13FT 14FT 15FT 16FT 17FT 18FT

1

1 1 1 2 2 2 2 2

0

0 0 0 1 1 1 1 1

1

0

2

1

2

1

3

2

3

2

2 2 2

2

2 2 2 2 2 2 22 2 2 2

3

4 5 6

3

4 6 6 8 9 10

11

8 8 10 12

2

2 2 2

2

2 2 2 2 2 2 22 2 2 2

2

2 2 2

2

2 2 2 2 2 2 22 2 2 2

2

1

1 1 1

1

1 1

1

1 1 1 11 1 1

1

1 1 1

1

1 1

1

1 1 1 11 1 1

1

3

2

3

2

picture

Junction

Tube

Tube Plug

Spacer

Floor

guide

Door

Stopper

Hex

Wrench

Track

Hanger

Double Door Hardware Kit Includes

Part Name

5FT4FT

6FT 6.6FT7.5FT 8FT 9FT 11FT10FT 12FT 13FT 14FT 15FT 16FT 17FT 18FT

1

1 1 1 2 2 2 2 2

0

0 0 0 1 1 1 1 1

1

0

2

1

2

1

3

2

3

4

4 4

4

4 4

4

4 4

4

4 4

4

4 4

4

4 4

4

4 4

4

4 4

4 5 6

3

4 6 6 8 9 10

11

8 8 10 12

2

2 2 2

2

2 2 2 2 2 2 22 2 2 2

2

2 2 2

2

2 2 2 2 2 2 22 2 2 2

2

1

1 1 1

1

1 1

1

1 1 1 11 1 1

1

3

2

3

2

picture

Junction

Tube

Tube Plug

Spacer

Floor

guide

Door

Stopper

Hex

Wrench

Track

Hanger

Note: If you encounter any problem with the package and the following installa-

tion, please email us at [email protected] . Please also tell

us your “ORDER ID,” we will solve any issues for you as soon as possible.

● Installation Tools

Check the Quantities of Flat Track ,Accessories and Steel

Hanger.

Pencil Level RatchetWrenchRuler

drill

Router

Chart: Track Junction

19.7” 19.7”10.3”

10.3”

5FT

19.7” 19.7” 19.7”3.45” 3.45”

5.5FT

10FT

6FT

12FT

6.6FT

13FT

7.5FT

8FT

16FT

19.7” 19.7” 4.3”4.3”

4FT

15FT

17FT

18FT

2

9FT

11FT

14FT

19.7” 19.7” 19.7” 6.45”6.45”

19.7” 19.7” 19.7” 10.05”10.05”

19.7” 19.7” 19.7” 19.7” 5.6”5.6”

3

Type-a

Type-b Type-c

Hanger

Track

Spacer

Floor Guide

Door Stopper

Hex Wrench

Tube PlugJunction Tube

type-a

type-b

type-c

type-a

type-b

b-1 b-2

b-3

type-c

Tip: Different Steel Hanger styles match with different Door Stoppers. Please identify

the matching Hanger and Stopper you bought.

● Steel Hanger

Prepare Your Doors

19.7” 19.7” 4.3”4.3”

19.7” 19.7” 4.3”4.3” 19.7” 19.7” 4.3”4.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7” 4.3”4.3”

19.7” 19.7”10.3”

10.3”

19.7” 19.7” 19.7”3.45” 3.45”

19.7”

19.7” 19.7”

3.45”

19.7” 19.7” 19.7” 6.45”6.45”

19.7” 19.7”10.3”

10.3”

19.7” 19.7” 19.7” 6.45”6.45”

19.7” 19.7” 19.7” 6.45”6.45” 19.7” 19.7” 19.7” 6.45”6.45”

19.7” 19.7” 19.7” 10.05”10.05” 19.7” 19.7” 19.7” 10.05”10.05”

19.7” 19.7” 19.7” 19.7” 5.6”5.6” 19.7” 19.7” 19.7” 19.7” 5.6”5.6”

※Hardware Installation

54

2-1/4”

(57mm)

2”

(50mm)

Type-a

Type-b

Type-c

3-5/16”(84mm)

2-1/4”(57mm)

2-15/16”(74.50mm)

1/4”(6mm)

5-1/8”(130.75mm)

2-1/8”(54mm)

7/16”(12mm)

2-1/8”(54mm)

5/16”(8mm)

3-5/16”(83mm)

3-7/8”(98mm)

5/8”(16mm)

1-1/8”(30mm)

2-3/4”(70mm)

2-1/4”(58mm)

2-3/16”(55.31mm)

2-3/4”(70mm)

2”(50mm)

Step 1: Attach Steel Hangers to Your Doors

Drill 3/8” (10mm) holes at the position from the top of the

doors shown in the above chart.

2”

(50mm)

b-2

b-3

76

3/4”(20mm)

5/16”(7mm)

Step 2: Cut Floor Guide Slot At The Bottom Of The Door

Cut a 5/16” (7mm) wide, 3/4” (20mm) deep slot at the

bottom of the door.

Recommended: Cut the slot with a router and slot cutter bit.

Step 3: Connect Tracks

Connect your tracks with junction tube if needed.

Step 4: Install Spacers

a.Putting the b-3 into the rail and make the hole direction

of b-3, rail and b-2 is consistent.

b.Installing in order from inside to outside to prevent

missing the hole.

Step 5:Draw Line for the Track

Using a level, draw a line for the Track, at the 2-5/16 (58mm)

+door height + 3/8” (10mm) above the floor.

Prepare and Install the Tracks

door height + 2-11/16” (68mm)

2-5/16”

(58mm)

b-1

18.59”

1.1”

18.59”

1.1”

18.59”

1.1”

1.1in

b-1

b-2

Anti jump

device

8 9

1-3/32”(28mm)

Step 6:Mark and Drill Track Holes

1.Mark the positions of each set’s two spacer holes, the

distance between each hole is shown as the picture.

2.Punch all the marked positions into the wall with impact

drill, put the expansion pipes into the holes created, then punch the

pipe pins into the wall until the expansion pipes expand at their ends,

screw b - 1 into the expansion pipe.

Step 7:Install The Track

1.Overlapping b - 1 and b - 2 and tighten to fix the rails to

the wall.

2.Now you have installed the track on the wall successfully.

Hanging and Positioning Doors

Step 8: Install Your Doors

a.Hang your Steel Hangers on the Track, and then adjust

the anti-jump bar up or down so that it could make the roller clamp

the track.

b.Position doors in your desired closed and open position

and adjust Door Stoppers.

door height + 2-11/16” (68mm)

10

Usage Statement:

Use of excessive force when opening, and closing,the door(s) may result in damage to the

hardware. Always hold the handle and gently open and close the door(s).

• Failure to wear proper safety gear (i.e.,eye protection) may result in serious injury or

death. Always wear proper safety gear before using power tools.

• Improper operation of power tools may result in loss of control, serious injury or death.

Always ensure you have complete control of the power tool and the work area is free of

hazards before operatiog a power tool.

• Lack of secure clamping of the door may result in unexpected movement of the

door,loss of power tool control and serious injury or death. Always securely clamp the door

in place before cutting,or drilling, the door.

• Lack of ,or improperly installed Anti-jump Disc may result in the door coming off the

track and cause serious injury or death. installation of Anti-jump Disks are required for safe

operation of this hardware. installed properly, these discs will keep the door securely

attached to the teack.

WARNING

• Mishandling of heavy objects (i.e.,doors) may cause a loss of balance and serious

injury. Always be sure you have a secure hold on the object and are balanced before

moving the object.Always wear safety shoes when lifting heavy objects.

• Getting body parts (i.e., hair,fingers) caught in moving parts may cause pinching and

serious injury.Do not put fingers in parts that may move and always remove or contain

anything on your body that may become entangled with a moving part.

• Closing sliding doors with your hand on the end of the door may result in your hand, or

fingers, getting caught between the door and other solid objects (i.e., another door,

molding) causing serious injury. Always use the door handle to close doors.

CAUTION

5 year straight unconditional warranty service enables every single hardware’s durability

coverage during its life time.

Warranty Statement:

Step 9:Install the Floor Guide

Position the door at your desired close position, put half of

the floor guide under the door, mark the location, and then fix guide

to the floor.

WINSOON GCM2728 Installation guide

This manual is also suitable for

WINSOON GCM2728 Installation guide

Related papers

Other documents