Digital Monitoring Products XR Series Arming and Disarming Reference guide

Brand
Digital Monitoring Products
Model
XR Series Arming and Disarming
Category
Security access control systems
Type
Reference guide

This manual is also suitable for

quick reference
XR100/XR500 or XR150/XR350/XR550 Arming and Disarming
Disarming the Alarm System
1. Press CMD until ARM DISARM displays.
2. Select DISARM, enter your user code and press CMD.
3. At ALL? NO YES, if you select NO, the keypad
displays the name of each area followed by NO
YES. Select YES or NO to disarm area(s) of your
choice.
Arming the Alarm System
1. Press CMD until ARM DISARM displays.
2. Select ARM, enter your user code if a closing code is
required and press CMD.
3. At ALL? NO YES, if you select NO, the keypad
displays the name of each area followed by NO
YES. Select YES or NO to arm the area(s) of your
choice.
4. SYSTEM ON or ALL SYSTEM ON displays.
Note: SYSTEM ON means at least one area in the
system is armed.
ALL SYSTEM ON means all areas in the system
are armed. The keypad begins counting down
the exit time.
32-Character Display
Armed LED
Power LED
Data Entry Digit keys
COMMAND Key
Back Arrow Key
Select Keys
1 2 3 4
9 0 CMD
5 6 7 8
FRI 8:51 AM
XR500
Keypad Layout and Function Keys
Keypad Shortcut Keys
1 2 3 4
9 0 CMD
5 6 7 8
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
Away
All
Sensor Reset
(Fire Reset)
Home
Monitor
(Chime)
Perimeter Sleep
LT-0895 © 2014 Digital Monitoring Products, Inc.
14075
800-641-4282
www.dmp.com
Designed, Engineered and
Assembled in the USA
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
Disarming Steps
THU 6:29 AM
ARM DISARM
ENTER CODE: -
Press CMD.
Press the key under DISARM.
Enter user code, and press CMD.
ALL? NO YES Select NO to Disarm only certain areas.
Select YES to Disarm All.
OFFICE NO YES
Select YES to Disarm the displayed area.
Continue selecting YES or NO to disarm all
areas of your choice.
CMD
CMD
Arming Steps
SYSTEM ON
All areas are Armed.
At least one area Is Armed.
THU 6:29 AM
ARM DISARM
ENTER CODE: -
Press CMD.
Press the key under ARM.
Enter your user code, and press CMD.
ALL? NO YES Select NO to Arm only certain areas.
Select YES to Arm All.
OFFICE NO YES Select YES to Arm the displayed area.
Continue selecting YES or NO to arm all
areas of your choice.
ALL SYSTEM ON
CMD
CMD
OR
  • Page 1 1
  • Page 2 2

Digital Monitoring Products XR Series Arming and Disarming Reference guide

Brand
Digital Monitoring Products
Model
XR Series Arming and Disarming
Category
Security access control systems
Type
Reference guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents