2. BALD
  3. 484A07

BALD 484A07, 484A08, 484A09 Installation guide

  • I have reviewed the installation manual for the BalanceBox 650 mounting system. This manual provides detailed instructions for wall mounting, attaching a touchscreen, and properly balancing the system. I'm here to answer any questions you have about these procedures or any other element of this device.
  • What tool is needed to set the balance?
    How to set the balance?
BalanceBox®650
For use with large touchscreens
Installation manual
order number: 484Axx
BalanceBox®650
For use with large touchscreens
Partnr: 902811-00
78
9
Set the balance, use a drill-driver with a 13 mm socket on 2 outer springs marked green
Drive counter clockwise 5 seconds each until balanced
Mount wall frame covers and
Application cover (optional)
Mount the touchscreen, use
BalanceBox® accessories
BalanceBox®650
For use with large touchscreens
1 2
3
5
4
6
Remove application cover (optional) Remove wall-frame covers Lift BalanceBox on wall bracket, mark top
holes. Take BalanceBox down and drill holes
Fix BalanceBox at the top.
Then level and fix at the bottom
Remove wall bracket Mount bottom wall bracket level to the wall
Safety warnings, contents of the box, tools needed
Mounting height
calculator on:
www.balancebox.eu →
*Fasteners not included
Choose based on type of wall
Use 4x 8mm
(Not included)
/