BalanceBox 650 User & Installation Manual

Brand
BalanceBox
Model
650
Type
User & Installation Manual
Thomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the Netherlands
BalanceBox
®
650
For use with large touchscreens
Installation manual
order number: 484Axx
BalanceBox
®
650
For use with large touchscreens
Partnr: 902811-02
7
8
9
Set the balance, use a drill-driver with a 13 mm socket on outer
springs marked green. Drive counter-clockwise 5 seconds each,
repeat until balanced
Mount the wall frame covers
Mount Application cover
VESA Bracket
not included
10
Mount the screen or touchpanel, use
BalanceBox® accessories
X
Do not
adjust!
BalanceBox
®
650
For use with large touchscreens
www.balancebox.eu
www.balancebox.eu
1 2
3
5
4
6
Remove application cover B Remove wall-frame covers C and D
Lift BalanceBox onto the wall bracket, mark the top
holes. Take BalanceBox down and drill holes
Fix at the bottom and level, then tighten.
Use 5mm Allen key
Remove wall bracket E use 5 mm Allen key Mount bottom wall bracket level to the wall
Use min. 4 x 8mm. (
5
/16”) screws (not included)
Safety warnings, contents of the box, tools needed
Mounting height
calculator on:
www.balancebox.eu →
A
(1x)
B
(1x)
D
(1x)
E
(1x)
C
(1x)
300
410
610
700
12"
16"
24"
27.5"
Fasteners not included
300
410
610
700
12"
16"
24"
27.5"
Fasteners not included
Mount BalanceBox at the top.
Use min. 4 x 8mm. (
5
/16”) screws (not included)
B
C
D
E
  • Page 1 1
  • Page 2 2

BalanceBox 650 User & Installation Manual

Brand
BalanceBox
Model
650
Type
User & Installation Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents