2. Computers & electronics
  3. TVs & monitors
  4. Flat panel wall mounts
  5. BALD
  6. BT480A12

BALD BT480A12, BT480A13, BT480A14 Installation guide

  • I've reviewed the provided installation manual for the BalanceBox®400 touchscreen mount. This document covers essential steps for proper wall mounting, attaching side covers with the VESA bracket, and adjusting the balance using a drill driver. I'm ready to answer your questions about the installation process and features of this mount.
  • What is the VESA bracket part number?
    What size of screws are used to attach side covers?
    How do you set the balance of the BalanceBox?
BalanceBox®400
For use with Touchscreens
Installation manual
order number: 480Axx
BalanceBox®400
For use with Touchscreens
Thomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the Netherlands
7
Part nr. 902809-01
8
MOUNT WALL COVER ATTACH THE SIDE COVERS TO THE
BALANCEBOX®400 USING THE VESA
BRACKET INSTALLATION POINTS AS SHOWN
4x M8
Max 10 mm
9
SET BALANCE, USE DRILL DRIVER LEFT/RIGHT 5 SEC COUNTER CLOCKWISE UNTIL BALANCED
Vesa Bracket
481A21
Not included
BalanceBox®400
For use with Touchscreens
1 2
3
5
4
6
MOUNT WALL BRACKET LEVEL TO THE WALL REMOVE COVER FROM BALANCEBOX LOCK BALANCEBOX WITH LOCK SCEWS LEVEL VERTICALLY WITH FEET AT
THE BOTTOM
MAKE SURE SCREWS ARE UNLOCKED LIFT BALANCEBOX ONTO THE BRACKET
Safety warnings, contents of the box, tools needed
Mounting height
calculator on:
www.balancebox.eu →
*Fasteners not included
Choose based on type of wall
16”
12”
1x
2x
/