
Salamander Interactive Wall Mounts 501-518 [4.23] page 4 of 10
Mounting EZ-Touch Mount Body to Wall
UnpacktheEZ-Touchandremovetheplasticcoverandtwofoamblocks.
Locating your mount
WOOD CONSTRUCTION:
locatetwoframingstuds(minimumof16”(405mm)apart)atthedesiredlocationusing
astudnderdevice.
MASONRY:
aminimumwidthof16”(405mm)isrequiredbetweenfasteners.
Installation of EZ1/MB16/152 Mount Body
Prepare Mounting Site
TheEZ-Touchwasdesignedtobeinstalledona16”oncenter2”x4”woodstud,or
metalstuds,usinghigh-qualityhollowwallanchorinstalledinthecenterofthestud
orasolidconcretewall.
WARNING: INSTALLING THE MOUNT IN UNDERRATED OR DAMAGED CONCRETE
CAN LEAD TO SERIOUS INJURY OR DAMAGE TO PRODUCT! When installing into
concreteonlyinstallthemountinasolidconcretewallmadeof2500PSI(17.3MPa)
orstrongerconcrete.Neverinstallthemountintocracked,chippedorakingconcrete.
WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING
SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers
responsibilitytomakesurethestructuretowhichtheEZ-Touchisbeinginstalledis
capableofsupportingthreetimesthecombinedweightoftheEZ-Touchandall
attachedequipmentisnottoexceedthefollowingweightcapacities:
EZ1/MB16/152:79-140lbs(36-64kg)
EZ1/MB16/209:134-197lbs(61-90kg)
EZ1/MB16/095:41-85lbs(18-38kg)
Packing Foam
Block (2x)
Plastic Cover
Plastic Cover
Packing Foam
Block (2x)
Remove Plastic Cover and Foam Blocks