BALD 484A08 Installation guide

BalanceBox®650

For use with large touchscreens

Installation manual

order number: 484Axx

BalanceBox®650

For use with large touchscreens

Partnr: 902811-00

Set the balance, use a drill-driver with a 13 mm socket on 2 outer springs marked green

Drive counter clockwise 5 seconds each until balanced

Mount wall frame covers and

Application cover (optional)

Mount the touchscreen, use

BalanceBox® accessories

BalanceBox®650

For use with large touchscreens

1 2

Remove application cover (optional) Remove wall-frame covers Lift BalanceBox on wall bracket, mark top

holes. Take BalanceBox down and drill holes

Fix BalanceBox at the top.

Then level and fix at the bottom

Remove wall bracket Mount bottom wall bracket level to the wall

Safety warnings, contents of the box, tools needed

Mounting height

calculator on:

www.balancebox.eu →

*Fasteners not included

Choose based on type of wall

Use 4x 8mm

(Not included)

This manual is also suitable for

Download PDF