2. EcoFlow
  3. WAVE 2
WAVE 2

EcoFlow WAVE 2 User guide

  • Hello! I've reviewed the EcoFlow Wave 2 Troubleshooting Guide. This document provides detailed solutions for various error codes you might encounter with your air conditioner, covering problems like battery issues, temperature errors, fan malfunctions, and more. I'm ready to answer your questions about the troubleshooting steps provided in the manual.
  • What should I do if the battery pack voltage is too high?
    What should I do if the XT60 port temperature is too low?
    What should I do if there is a fan error?
    What does error code 30 mean?
EcoFlow Wave 2
Troubleshooting
Guide
V1.0
Troubleshooting
Fault Code Error Type Solution
1Battery pack voltage is too high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Turn off all the power supplies, and only charge with the battery pack;
• Check if rmware updates are available, and upgrade to the latest version.
2 Battery pack voltage is too low
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
3 AC output current is too high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
4 Bus voltage is too high
• Turn off all the power supplies (including the battery pack), then try to restart the unit
by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
5 Bus voltage is too low
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
6XT60 port temperature is too
low
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes at room temperature, then try to restart the unit by only charging with the
solar/car charging socket (XT60);
• Check if rmware updates are available, and upgrade to the latest version.
7XT60 port temperature is too
high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes in a cool place, then try to restart the unit by only charging with the solar/car
charging socket (XT60);
• Check if rmware updates are available, and upgrade to the latest version.
8 AC input current is too high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
11 PSDR board temperature is too
high
• Turn off all the power supplies (including the battery pack), let the unit stand for
5 minutes in a cool place, then try to restart the unit by only charging with the AC
charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
12 PSDR board temperature is too
low
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes at room temperature, then try to restart the unit by only charging with the
AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
13 The fan has stalled
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
14 Output current of XT60 port is
too high
• Turn off all the power supplies (including the battery pack), let the unit stand for
5 minutes, then try to restart the unit by only charging with the solar/car charging
socket (XT60);
• Check if rmware updates are available, and upgrade to the latest version.
15 Input voltage of XT60 port is
too high
• Turn off all the power supplies (including the battery pack), let the unit stand for
5 minutes, then try to restart the unit by only charging with the solar/car charging
socket (XT60);
• Check if rmware updates are available, and upgrade to the latest version.
16 AC input voltage is too high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
17 AC input voltage is too low
18 Input voltage frequency is too
high
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if rmware updates are available, and upgrade to the latest version.
19 Input voltage frequency is too
low
30 Short circuit
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, and then try to restart the unit;
• Check if rmware updates are available, and upgrade to the latest version.
31 Compressor start-up error
32 Compressor operation error
33 High appliance temperature
• Turn off all the power supplies (including the battery pack), let the unit stand in a cool
place for 5 minutes, and then try to restart the unit;
• Check if rmware updates are available, and upgrade to the latest version.
34 Low appliance temperature
• Turn off all the power supplies (including the battery pack), let the unit stand at room
temperature for 5 minutes, and then try to restart the unit;
• Check if rmware updates are available, and upgrade to the latest version.
35 Overvoltage
• Turn off all the power supplies (including the battery pack), check if the air outlets are
obstructed and remove the obstructions, let the unit stand for 5 minutes, and then try
to restart the unit;
36 Undervoltage
37 Exhaust
38 Front fan error
• Turn off all the power supplies (including the battery pack), and try to restart the unit;
• Check if rmware updates are available, and upgrade to the latest version.
39 Rear fan error
40 Fluorine shortage
• Turn off all the power supplies (including the battery pack), let the unit stand in a cool
place for 5 minutes, and then try to restart the unit;
41 Overload
• Check if the front and rear air outlets are obstructed and remove any obstructions;
• Check if rmware updates are available, and upgrade to the latest version.
50 Motor board communications
error
• Turn off all the power supplies (including the battery pack), and try to restart the unit;
• Check if rmware updates are available, and upgrade to the latest version.
51 Power board communications
error
52 WiFi communications error
53 Temperature sensor error
If the problem persists, please contact Ecoow after-sales service.
/