5019 100 75049
DFH 3360
DFH 3390
1.
Control panel.
2.
Grease filters (inside extraction grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b
,
c
,
d
).
4.
Remove the burnt-out bulb.
Use 40W max E14 bulbs only.
5.
Remount the extractor grille.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b
,
c
,
d
).
4. Fitting:
(
e
) Locate the carbon filter in the
rear clips and (
f
) secure the front using the
clips with which the filter itself is provided.
Removal:
press the release buttons(
f
) and
pull the filter out downwards.
5.
Remount the extractor grille.
WASHING THE GREASE FILTERS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b
,
c
,
d
).
4.
Press outwards on the the plastic clips (
g
)
securing the grease filters.
5.
Remove the soiled grease filters.
6.
After cleaning the grease filters refit in
reverse order, making sure the entire
extraction surface is covered.
CONTROL PANEL
Turn the knob clockwise to select the desired
speed (shown on display) in accordance with the
amount of steam to be extracted:
0 - hood switched off.
1 - speed 1 - small quantity of steam and
smoke.
2 - speed 2 - medium quantity of steam and
smoke.
3 - speed 3 - large quantity of steam and
smoke.
Pull the knob outwards to switch on the lights,
press the knob to switch off the lights.
4
1
2
3
3
2
1
0
Display
g
gg gg
e e
ff
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI