2. Scotsman
  3. KBT39 - Use with 22" wide deep flake or nugget ice machine onto a B842 ice storage bin

Scotsman KBT39 - Use with 22" wide deep flake or nugget ice machine onto a B842 ice storage bin Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Scotsman KBT39 - Use with 22" wide deep flake or nugget ice machine onto a B842 ice storage bin Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
for the installation of the bin top kit, KBT39 onto bin B842
Applications: 22” wide x 24” deep flake or nugget ice
machine centered on bin top.
1. Uncrate the bin.
2. Install the legs.
3. Open up K kit, it will contain two filler plates with insulation attached, two mounting
straps and a tube of food grade RTV sealant
4. Place a filler plate on each end of the bin. The filler plates are built so one is for the
left end and one is for the right end. Position them so that the attached insulation fits
inside the bin’s liner. Secure each at the back with one 5/16” bolt from the kit.
5. Drill three 1/8” dia holes thru the bin’s outside panel using the holes in the flange of
each filler plate as a template. Do NOT drill beyond the outside panel.
6. Attach the side of each filler
plate to the bin with three #8
sheet metal screws from the kit.
7. Place ice machine centered
between the two filler plates.
8. Secure ice machine to the bin
with the straps from the kit and
the bolts from the ice machine’s
hardware bag.
9. Seal the edges of the ice
machine to the filler plates with
the RTV sealant.
Note: Sealant fills any gap
between ice machine base
and filler plate.
Instructions
Filler Plate
Mounting
Straps
Filler
Plate
17-3302-01
/