2. Energy Suspension
  3. Rear Sway Bar Bushing Set

Energy Suspension Rear Sway Bar Bushing Set Installation guide

  • Hello! I'm your chat assistant, and I've reviewed the installation instructions for the Energy Suspension 17145 Sway Bar Bushing. This document covers the full installation process, from removing old parts to periodic lubrication, ensuring your new bushings perform optimally. I’m ready to answer your questions about the installation and maintenance steps outlined in this guide.
  • How many pumps of grease are required for periodic maintenance?
    What should be done before installing the new bushings?
    What is the first step in the installation process?
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
/