LEGAL
NOTICE
Design
of
device
and
packaging are intellectual
properties of Zound Industries lnternatlonal
AB.
C All
Rights Reserved
MARSHALL, Marshall Amps, their respective logos,
"Marshall' and "Marshall" trade dress are trademarks and
intellectual property of Marshall Amplification Pie
and
may
not be used without permission. Permission granted to
Zound Industries International AB.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG,
Inc.
and any
use
of such marks by Zound Industries
1s
under
license.
All other trademarks are the property
of
their respective
owners and may not
be
used without permission.
For more legal information related to this product
and
to its use in your specific region, and for more detailed
Information about Zound Industries and partner &
license information. please visit the website:
www.
marshallheadphones.com. The user is recommended to
visit the website regularly for up-to-date information.
Zound Industries lnternallonal AB, Centralplan
15,
111
20
Stockholm, Sweden.
FCC
STATEMENT
FCC
ID
is located under the right ear
cushion.
To
remove, gently part the ear cushion from the headphone,
starting from one
side.
WARNING: Any changes or modifications
to
this device
not expressly approved by the party responsible for
compliance could void the user's authonty to operate
the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful Interference, and
(2)
this device must accept any interference received, Includ-
ing interference that may cause undesired operatlon. This
equipment complies with the
FCC
radiation exposure
limits set forth for an uncontrolled environment. This
device must not be co-located or operated
in
conjunction
with any other antenna or transmitter.
This equipment has been tested
and
found to comply with
the limits for a Class B digital device, pursuant to part
15
of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
1f
not
installed and used
in
accordance with the instructions,
may cause harmful interference to radio communications.
However, there Is
no
guarantee that interference will not
occur in a particular installation.
If
this equipment does
cause harmful interference to radio
or
television recep-
tion, which can be determined
by
turning the equipment
off
and
on, the user is encouraged to
try
to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into
an
outlet on a circuit
different from that to which
the
receiver Is connected.
• Consult the dealer or
an
experienced radio/TV
technician for help.
U.S.
responsible party, contact information:
Zound Industries USA,
Inc.
260 W 39th Street Suite 1101, New York, NY 10018, USA
Telephone number· 646-214-1003
IFETEL
La
operac16n
de este equIpo esta sujeta a las
siguientes dos condiciones (1) es posible qua este
equipo o
d1sposltlvo
no cause interferencia perjudicial
y (2) este equIpo o
dispos1trvo
debe aceptar cualquier
interferencia, incluyendo
la
que pueda causar
su
operaci6n no deseada.
ANATEL
Esta produto
estA
homologado pela ANATEL, de
acordo com os procedimentos regulamentados pela
Resolu~o n•. 242/2000 e atende aos
requ1sitos
tocmcos apllcados. Este equipamento nao
tern
direIto
a
prote~o
contra
interferAncia prejudicial e nao
pode causar interferAncia
em
slstemas devidamente
autorizados.
..
Para maIores lnforma¢es, consulte o site da ANATEL
-www.anatel.gov
br.
IC
STATEMENT
IC ID is located under the right ear cushion. To
remove, gently part the ear cushion
from
the head-
phone, starting
from
one side.
Les numeros d'identification IC
ID
est situes juste sous
le coussinet d'orelllette droit. Pour l'enlever, maIntenez
le coussinet d'oreillette
et
tournez dans le sens inverse
des aiguilles d'une montre.
This device complies with Industry Canada licence-ex-
empt
RSS
standard(s). Operation is subject to the
following two
condiUons:
(1) this device may not cause
interference,
and
(2)
this device must accept any
interference, including interference that may cause
undesired operation
of
the device.
Cet appareil est conforme a
la
norme
RSS
sans
licence d'lndustrie Canada. Son fonctionnement
est soumis aux deux conditions suivantes: (1) cet
appareil ne doit pas provoquer d'interference
et
(2)
cet appareil doit supporter les interferences, y compris
Jes
interferences susceptibles
de
provoquer
un
fonctionnement inattendu.
This Class B digital device complies with Canadian
ICES-003.
Cet appareil numerique de classe B est conforrne a la
norme ICES-003
au
Canada.
CAN
ICES-003 (B)/NMB-003(6)
~•••a~z~••~•n•.••~*-~~-~
••~m«~~•m~•~••·
m*••••~•&
ttz~tt&••·
~••~•••z~m~•~•m~~~&T•*~~
«:••~•T•~•~.•~~~m.tta•¥•T
allf1i•••ifm.
•~*~••.•~••••~•~~•z••••
-•~••M•
■
•~~~*~B-~I•.
~-&
■
•m
·••Mtt•••Hlz
T
•.
R4
UK
CR
Compiles
with
IMDA
Standards
DA106056
CE
~R[