Marshall 972WILLENB User guide

Marshall
Brand
Marshall
Model
972WILLENB
Type
User guide
ENGLISH
GETTING
STARTED
001.
Push
and
hold
the
control
knob
until
the
speaker
turns
on.
002.
Push
and
hold
the
Bluetooth
button
until
the
LED
turns
to
a
slow
red
pulse.
003.
Select
WILLEN
from
your
audio
device's
Bluetooth
9 list.
0
USB-C
POWER
INPUT
Charge
the
speaker
by
plugging
it
into
a
USB
power
source.
0
FASTENING
STRAP
Unhook
the
lower-right
side
of
the
strap
by
stretching
it
gently.
@
BLUETOOTH
BUTTON
Push
and
hold
the
Bluetooth
button
until
the
LED
turns
to
a
slow
red
pulse
to
start
pairing
mode.
©
MICROPHONE
The
microphone
lets
you
use
Willen
as
a
speaker
phone.
Push
the
Bluetooth
button
to
toggle
the
call
between
Willen
and
your
phone.
©
BATTERY
INDICATOR
The
5
segment
battery
indicator
shows
the
battery
charge.
©
CONTROL
KNOB
I.
Push
and
hold
to
turn
on/off
II.
Push
once
to
play/pause
Ill.
Push
right/left
to
skip
forward/back
IV.
Hold
right/left
to
fast
forward/rewind
V.
Hold
upwards/downwards
to
adjust
the
volume
VI.
Push
once
to
answer
or
end
a
call
VII.
Push
twice
to
reject
a
call
0
STACKMODE
Connect
two
or
more
Willen
speakers
in
a
Stack
session
for
a
bigger
sound.
MAIN
SPEAKER
Triple
press
the
Bluetooth
button
to
start
or
end
a
Stack
session.
ADDITIONAL
SPEAKER
Double
press
the
Bluetooth
button
on
any
speaker
you
want
to
add
to
or
remove
from
the
session.
Download
the
Marshall
Bluetooth
app
to
get
the
most
out
of
your
speaker.
The
full
user
manual
is
available
in
the
app
or
at
marshal
I
headphones.com
001
Design
of
device
and
packaging
are
intellectual
properties
of
Zound
Industries
International
AB
and
Marshall
Amplification
Pi
e.
©
All
Rights
Reserved
.
MARSHALL
,
Marshall
Amps,
their
respective
logos
, "
Marshall
"
and
"
Marshall
"
trade
dress
are
trademarks
and
intellectual
property
of
Marshall
Amplification
Pie
and
may
not
be
used
without
permission
.
Permission
granted
to
Zound
Industries
International
AB.
The
Bluetooth
•
wordmark
and
logos
are
registered
trademarks
owned
by
the
Bl
uetooth
SIG
,
Inc.
and
any
use
of
such
marks
by
Zound
Industries
International
AB
is
under
license.
Goog
le
Play
is a
trademark
of
Google
LLC
.
App
Store
is
a
service
mark
of
Apple
Inc.
,
registered
in
the
U.
S.
and
other
countries
.
R1
.0
MARSHALLHEADPHONES.COM
•
VOG?S2101-0002
WILLEN – PORTABLE LOUDSPEAKER
FULL ONLINE MANUAL
003
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
6
1
2
345
6
DEVICE LAYOUT ENGLISH
004
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
The 5 segment Battery indicator shows the battery charge with a
steady light and a rising animation indicates charging.
Unhook the lower-right side of the strap by stretching it gently.
Charge the speaker by plugging it into a USB power source.
The microphone lets you use Willen as a speakerphone. While in a
call, push the Bluetooth button to toggle between using Willen for
the call and your phone.
Push and hold for 2 seconds to turn on/off
Push once to play/pause
Push right/left to skip forward/back
Hold right/left to fast forward/rewind
Hold upwards/downwards to adjust the volume
Push once to answer or end a call
Push twice to reject a call
I.
II.
III.
IV.
V.
VI.
VII.
BATTERY INDICATOR
FASTENING STRAP
USB-C POWER INPUT
MICROPHONE
CONTROL KNOB
GENERAL ENGLISH
1
2
3
4
5
6
BLUETOOTH BUTTON
Push and hold the Bluetooth® button until the LED turns to a slow red
pulse to start pairing mode.
005
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
INSTRUCTIONS ENGLISH
A factory reset will return the speaker to its original settings, excluding
any firmware updates.
Note: This will delete all user settings and the speaker will need to be
set up again.
Ensure that the speaker is on.
Push and hold the Bluetooth button for 7 seconds. All indicators turn
o and the speaker restarts.
Remove WILLEN from your audio device’s Bluetooth list before
pairing again.
I.
II.
III.
PERFORMING A FACTORY RESET
MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your
speaker and keep it up to date with the latest software.
Push and hold the control knob until the speaker turns on.
Push and hold the Bluetooth button until the LED turns to a
slow red pulse.
Select WILLEN from your audio device’s Bluetooth list.
I.
II.
III.
BLUETOOTH PAIRING
006
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
INSTRUCTIONS ENGLISH
CLEANING THE SPEAKER
Clean your speaker regularly to keep it fresh and last longer.
Unplug any leads before cleaning the speaker and make sure everything is
completely dry before plugging in any USB power source.
The silicone sleeve and strap can be removed and cleaned separately. Use a
disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol
or 75% ethyl alcohol to gently clean silicon parts. Dry them with a towel
before putting them back on the speaker.
Carefully clean the speaker mesh and openings with a dry and soft brush,
or a cotton swab.
• Do not use any sharp or metal objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the speaker in any cleaning agents.
BATTERY CARE GUIDE
Your speaker comes equipped with a high-performance lithium-ion battery
and the life span is aected by charging and usage. Follow the guidelines
below to keep your battery in great condition for as long as possible.
• Avoid using fast chargers if possible. Fast charging causes stress
on the battery and will degrade it.
• Avoid charging the battery when it is already full or letting it drain
completely. Try keeping the charge between 30% and 80%.
• If the speaker is stored for a long time, do so with a half-charged
battery and in a cool, dark, and dry place.
• Do not use or charge the speaker in hot and unventilated places, 45°C/113°F
and above, such as in a parked car or by a window in direct sunlight.
• Avoid charging the battery at low temperatures, below 10°C/50°F and
using the speaker below 0°C/32°F.
• Avoid strong mechanical shocks such as dropping the speaker on hard
surfaces as it might damage the battery.
007
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
+
1 2
Double press the Bluetooth button on any speaker you want to add
to the session. The LED starts to blink until the speaker has joined
a session. While in a session, the speaker will disconnect from any
previously connected audio device and will try to reconnect after
leaving the session.
To remove a speaker from the session, double press the Bluetooth
button on that speaker.
Triple press the Bluetooth button to start or end a Stack session. The
LED starts to blink until any other speaker joins the session.
Connect two or more Willen speakers in a Stack session for a bigger sound.
Play anything on the main speaker and all speakers in the session will
play in sync. You can adjust the volume on any individual speaker for the
perfect balance.
ADDITIONAL SPEAKER
MAIN SPEAKER
STACK MODE ENGLISH
1
2
008
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
The speaker does
not turn on
Cannot connect
or pair with a
Bluetooth device
The battery has
no charge.
Bluetooth is not
enabled on your
device (smartphone,
tablet, computer).
The speaker is not
turned on.
Plug the speaker into
a USB power source
to charge it.
Activate
Bluetooth on your
audio device.
Push and hold the
control knob for
2 seconds to turn
on the speaker
before setting it in
pairing mode.
TROUBLESHOOTING ENGLISH
PROBLEM CAUSE ACTION
Bluetooth
connection
drops out
Cannot play in
Stack mode
The Bluetooth
devices are too
far apart, or the
connection is
affected due
to obstacles.
The playback device
is not connected to
the main speaker.
Move the devices
closer to each other
so that they are
unobstructed by
obstacles such as
walls or doors.
Make sure that your
playback device
(phone or computer)
is paired with the
main speaker.
009
BACK TO INDEX
WILLEN - FULL ONLINE MANUAL
Bluetooth
connection
drops out
There is a strong
electric field
surrounding the
speaker. Items
such as microwave
ovens, wireless
network adapters,
fluorescent lights
and gas cookers
use the same
frequency range as
the Bluetooth device.
This may lead to
electrical
disturbances.
There is a
software error.
Move the speaker
to another spot or
turn o or move
the interfering
electronic device.
Perform a factory
reset by pressing the
Bluetooth button for
7 seconds.
The speaker needs to
be set up again.
Erratic behaviour The speaker is not
using the latest
firmware version.
Download the
Marshall Bluetooth
app and connect
to the speaker.
Follow the in-app
instructions to ensure
that the speaker
has the latest
firmware version.
TROUBLESHOOTING ENGLISH
PROBLEM CAUSE ACTION
MARSHALLHEADPHONES.COM
Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall
Amplification Plc. © All Rights Reserved. MARSHALL, Marshall Amps, their respective logos, “Marshall”
and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may
not be used without permission. Permission granted to Zound Industries International AB. The Bluetooth®
wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks
by Zound Industries International AB is under license. Google Play is a trademark of Google LLC. App Store
is a service mark of Apple Inc., registered in the U.S. and other countries. R 1.4
WILLEN
-
PORTABLE
LOUDSPEAKER
LEGAL
&
SAFETY
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3.
Heed all warnings.
4. Follow all instructions.
5 Clean only with a
dry
cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
7.
Do not install near any heat sources such
as radiators, heat registers, stoves,
or
other
apparatus (including amplifiers) that produce
heat.
8.
Protect the power cord from being walked on
or
pinched particularly
at
plugs, convenience
receptacles, and the point where they exit from
the apparatus.
9. Only use attachments/accessories specified by
the manufacturer.
10.
(I
Use only with the cart, stand,
tripod, bracket,
or
table specified
by the manufacturer,
or
sold with
the apparatus. When a cart
or
rack
is used, use caution when moving the
cart/
apparatus combination to avoid injury from
tip-over.
11.
Unplug this apparatus during lightning storms
or
when unused
for
long periods
of
time.
12. Refer all servicing to qualified service
personnel. Servicing is required when
the
apparatus, power-supply cord
or
plug has
been damaged in any way
or
does not operate
normally.
WARNING
• This is not a toy. Keep this product and its
accessories away from young children.
• Additional country-specific certification
markings can be found under the protective
silicone sleeve.
• Do not drop the product.
• Do not cover the product, as this may cause
overheating.
• Placing your ears too close to the speaker could
damage your hearing.
• Do not listen
for
an extended period
of
time
at
a
high sound pressure level.
• Do not install the product in an area that
impedes access to the power source.
• The internal battery is not end-user replaceable.
Do not attempt to remove the battery from this
product.
• Do not expose the battery to excessive heat
such as direct sunlight, naked flame
or
similar.
• Make sure this product, including cables
and power source are completely dry before
charging the internal battery.
INSTALLATION & CONNECTION
• Use only standard USB-C cables connected to a
USB power source to charge this product.
• No naked flame sources, such as lighted can-
dles, should be placed on
or
near the apparatus.
DISPOSAL & RECYCLING INFORMATION
Electrical products, cables, batteries,
packaging, and the manual, should not
be mixed with general household waste.
For proper recycling, please take these
-products to a designated collection point
where they will be accepted free
of
charge
or
return
them to your local retailer. Correct product disposal
saves resources and prevents negative effects on
human health and the environment
For more information related to disposal
and recycling, visit the website:
www.
marshallheadphones.com
DISCLAIMER
Stated play time is calculated using a random
selection
of
music, played
at
medium volume.
The information contained herein is correct
at
the
time
of
publication, with reservation
for
editorial
errors. This product is software dependent and
its functions and compatibility can change when
updating the software.
DECLARATI
ON
OF CONFORMITY
Hereby, Zound Industries International AB, declares
that this product is in compliance with 2014/53/EU
and the UK The Radio Equipment Regulations 2017
(S12017/1206).
Maximum RF transmit power: Bluetooth (2402-2480
MHz)<
20 dBm
The full text
of
the
EU
and UKCA declaration
of
conformity is available
at
the following website:
www.marshallheadphones.com/doc
UK Authorised Representative:
Zound Industries UK LTD, 24 Old Queen Street,
London, SW1H 9HP, United Kingdom
Designed in Stockholm • Produced in China
LEGAL
NOTICE
Design
of
device and packaging are intellectual
properties
of
Zound Industries International AB and
Marshall Amplification Pie. © All Rights Reserved.
Zound Industries International AB is hereinafter
referred to as
·zound
Industries· or ·manufacturer".
MARSHALL, Marshall Amps, their respective
logos, •Marshall• and "Marshall" trade dress are
trademarks and intellectual property
of
Marshall
Amplification Pie and may not be used without
permission. Permission granted to Zound Industries
International AB.
The Bluetooth® wordmark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use
of
such marks by Zound Industries is under
license.
Google Play is a trademark
of
Google LLC.
App
Store is a service mark
of
Apple Inc., registered
in the U.S. and other countries.
All other trademarks are the property
of
their
respective owners and may not be used without
permission.
For more legal information related to this product
and to its use in your specific region, and for more
detailed information about Zound Industries and
partner & license information, please visit the
website:
www.marshallheadphones.com
The user is recommended to visit the Website
regularly for up-to-date information.
Zound Industries International AB, Centralplan
15,
111
20 Stockholm, Sweden.
FCC
STATEMENT
Any changes
or
modifications to this unit not
expressly approved by the
party
responsible for
compliance could void the user's authority to
operate the equipment.
This device complies with part 15
of
the FCC Rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This device complies with the FCC radiation
exposure limits set forth for an uncontrolled
environment.
This device must not be co-located or operated in
conjunction with any other antenna
or
transmitter.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15
of
the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and,
if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If
this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one
or
more
of
the following
measures:
• Reorient
or
relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
U.S. responsible party, contact information:
Zound Industries USA, Inc.
260 W 39th Street Suite 1101, New York NY 10018,
USA
Telephone number: 646-214-1003
IC
STATEMENT
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to
the following two conditions:
(1)
this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation
of
the device.
Cet appareil est conforme a la norme RSS sans
licence d'lndustrie Canada. Son fonctionnement
est soumis aux
deux
conditions suivantes:
(1)
cet
appareil ne
doit
pas provoquer d'interference
et
(2) cet appareil
doit
supporter les interferences, y
compris les interferences susceptibles de provoquer
un fonctionnement inattendu.
Exposure
of
humans to RF fields (RSS-102)
The radiated energy from the antennas connected to
the wireless adapters conforms to the IC limit
of
the
RF exposure requirement regarding IC RSS-102,
Issue 5 clause 4.
SAR
tests are conducted using
recommended operating positions accepted by
the RSS with the device transmitting at its highest
certified power level in all tested frequency band
without distance attaching away from the body.
Conformite des appareils
de
radiocommunication
aux limites d'exposition humaine aux
radiofrequences (CNR-102)
L'energie emise par les antennas reliees aux cartes
sans fil respecte la limite d'exposition aux
radiofrequences telle que definie par lndustrie
Canada dans la clause
4.1
du document CNR-102,
version
5.
Tests DAS sont effectues en utilisant
las positions recommandees
par
la CNR avec le
telephone emet a la puissance certifiee maximale
dans toutes les bandes de frequences testees sans
distance attacher loin du corps.
This Class B digital device complies with Canadian
ICES-003.
Cat appareil numerique
de
classe B est conforme a
la norme ICES-003 au Canada.
CAN ICES-003 (B) / NMB-003(8)
IFETEL
La operaci6n de este equipo esta sujeta a las
siguientes dos condiciones:
(1)
es posible que
este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operaci6n no deseada.
ANATEL
Este produto esta homologado pela ANATEL, de
acordo com os procedimentos regulamentados pela
Resoluc;ao n•. 242/2000 e atende aos requisitos
tecnicos aplicados. Este equipamento nao tern
direito a protec;ao contra interferencia prejudicial
e nao pode causar interferencia em sistemas
devidamente autorizados.
Para maiores informac;oes, consulte o site da
ANATEL www.anatel.gov.br
Iti~••t1111J.12.{LtJ1.J$fUlft#,
1Hl~)tt,
~a.I,
~
~~~m•~~~m~•~••·ro*J1.J•••£~m
tt2.%1i&J1.Jftg.
{LtJ1.J•~••~z~ffl~ffl~•m~~~&T•~~
~ia;&B~flT•~-~.SliW~ffl.tt~•~-T
•*1.iffla
■
ifffl.
00~~~~~.-~-~-~~-~~•2.•••A
ffio~J1.J-~Mft#~~~~~~ffi~IM,fl•&
■
flffl•iltl•M11•ami12.Ttl.
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Marshall 972WILLENB User guide

Marshall
Brand
Marshall
Model
972WILLENB
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents