1
EASY TOUCH Microprocessor
Microprocessor replacement
Machine Type : MEDII/WED-ET/WEM-ET/WEN-ET
Remove the Microprocessor that is placed on the main board
Remove the two metal parts, the
card will automatically lift
Remove the microporocessor
Then replace the new microprocessor card by
tilting it as shown in the picture. Push to the
left and press the card until it snaps between
the 2 metal parts
2
At start-up, it is necessary to configure the card according to the machine model.
The screen asks a password.
The passwords are:
- MEDII : 2503
- WED-ET/WEM-ET/WEN-ET : 2472
After validating the password, it is necessary to choose the model of the machine according to
the machine. Example: If the machine is a MEDII16, the model MEDII16 must be chosen.
Then select the type of heating corresponding to the machine by pressing the corresponding
symbol. Then validate with OK
The machine is now configured according to its model
ELECTRICAL Heating
HOT WATER Heating
STEAM Heating
3
Inserting the serial number
After the selection of heating type, it will ask to enter the serial number.
For this, the keyboard screen will be displayed with the text "ENTER SERIAL NO".
On this screen:
"X" button: You will return to the previous step of asking for heating type.
"√" button: The empty serial number will be saved, and the configuration sequence will
be finished.
Any key: The text message will be deleted, and the entered key will be displayed.
Having something edited if the delete button is pressed, the last key entered will be deleted. If
all the keys entered are deleted, the text "ENTER SERIAL NO" will be displayed again.
It will be checked that the serial number entered is numeric and that it has 10 digits. Therefore,
you can only finish the configuration process correctly, leaving an empty serial number or
entering 10 digits. In all other cases (if letters, 9 digits, 11 digits are included...), an error
message will be displayed indicating that the serial number is not formatted correctly. This
security will also be included when you go to edit the serial number from the technical screen
(by pressing the hidden button).
4
Choice of the program library.
a. Default 1: Standard programs
b. Default 2: USA programs
c. Default 3: Barrier washers programs
d. Default 4: Special programs
Besides, in the program library you will have the option to add extra packages of programs
related to specific operations (wet cleaning, mops ...)
-
1
-
2
-
3
-
4
Danube MEDII-WED-ET User Instructions
- Type
- User Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Citrix Workspace Environment Management 1811 User manual
-
Sharp MXB450W Operating instructions
-
-
IBM 5000 User manual
-
Lenovo M79 User guide
-
Lenovo M79 User guide
-
Casio IT-2000D User manual
-
-
BIO RAD PTC-100 Operating instructions
-
Texas Instruments TravelMate 2000 User manual
