Symmons Industries S-2610-STN-1.5 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Quick Install Guide Vella Kitchen Faucet, S-2610
Step 2
Attach faucet
Step 5
Connect water
supply lines
nished deck
front view
Step 1
Fasten deck plate
(optional)
Step 6
Flush supply lines
and check for leaks
Step 4
Attach counterweight
Step 3
Connect pull-out
spout hose
Pull-out spout
operation
HOT
COLD
Spray
on / off
red stripe
blue stripe
1/8 "
Model Numbers
S-2610.....
Kitchen Faucet
Decorative Finish Codes
append to part numbers when applicable
-STN
Satin Nickel
-STS
Stainless Steel
--
Chrome (standard)
Tools & Materials
Need Help?
Symmons customer service:
(800) 796-6667, (781) 848-2250
Monday - Friday 8:00 am - 7:30 pm EST
www.symmons.com/service
Technical help
Product information
Warranty policy
Kitchen Faucet S-2610
Installation and Service Instructions
Vella
Step 1 Attach deck plate (optional)
Installing deck plate is optional. Plate is typically used when
replacing a faucet to cover existing holes.
Step 2 Attach faucet assembly to deck
nished deck
front view
single hole mount
without deck plate
front view
nished deck
align
at edges
Step 3 Connect pull-out spout hose
Step 4 Attach counterweight to hose
blue stripe
red stripe
no stripe
washer
~ 25 inches
(635 mm)
Caution: If replacing an older faucet ensure water supply is
turned
OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2
Installation Instructions
Page 2
Step 5 Connect supply lines
Step 6 Flush supply lines and check for leaks
HOT
COLD
washer
Care of faucet fi nish
Clean  nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve  nish area.
Removing handle and cartridge
Replacing cartridge and handle
Valve cartridge replacement
1/8"
1
2
1/8"
Page 3Page 3
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184
(800) 796-6667, (781) 848-2250
Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com
Email: customerservice
@
symmons.com
© 2008 Symmons Industries, Inc. Printed in U.S.A.
ZV-497 120708
3/4" dia. (19 mm)
deck plate hole size
7/8" (22 mm) min.
1-1/8" (29 mm) max.
Finished deck
thickness
1-5/8" max.
(41 mm)
4"
(102 mm)
1-1/8" dia. (29 mm)
center spout hole size
1-1/4" (32 mm) min.
1-1/2" (38 mm) max.
deck plate
10-1/8" (257 mm)
deck plate
2-5/8" (67 mm)
Dimensions Vella Kitchen Faucet, S-2610
deck plate
1/4" (6 mm)
*
Single hole mount without
deck plate installed
*
Finished deck thickness
1-7/8" (48 mm) max.
2-3/8"
(62 mm)
11"
(280 mm)
8-1/4"
(209 mm)
10-1/8"
(258 mm)
12-1/8"
(308 mm)
10" (255 mm)
*
10-3/4"
(273 mm)
*
8"
(203 mm)
*
9-7/8"
(251 mm)
*
11-7/8"
(302 mm)
8"
(203 mm)
Replacement Parts
Part Number Item
valve cartridge
Pull-out spout hose washer
Washer for exible
metal type hose
Washer for nylon
type hose
KN-4
SC-12W
KN-236A
LN-287
(TBD)
washer
see table
Parts Assembly Vella Kitchen Faucet, S-2610
handle*
screw, 1/4-28 x 5/16
plug button*
collar*
retaining ring
pull-out spout*
standard aerator
2.2 gpm
valve cartridge
faucet body*
deck plate*
gasket
ber washer
ange nut
ber washer
mounting nut
pull-out spout
supply hose
(metal or nylon type)
lead weight
screws
1/4-20 x 1/2
adapter
washer
Ordering replacement parts:
Symmons customer service: (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST
Symmons distributors: www.symmons.com
hot supply hose
with red stripe
cold supply hose
with blue stripe
3/8"
*
Note: When ordering parts for faucets with an
optional decorative nish, append appropriate
three letter sufx code to part numbers marked
with an asterisk (
*
).
aerator ow rates
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Symmons Industries S-2610-STN-1.5 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI