Page is loading ...
Installation notes:
1) Apply plumber tape to threaded
connections as shown in illustration.
2) DO NOT use plumber putty or plumber
tape on ttings with face seal washers
or o-ring seals.
3) DO NOT OVERTIGHTEN ttings with
face seal washers or o-ring seals.
1
2
9
8
7
3
4
6
5
10
Quick Install Guide Two Handle Widespread Lavatory Faucet
Plumbers
Putty
SLW-3510-1.5SLW-3512-1.5
Need Help?
Contact Symmons customer service at
Phone: (800) 796-6667
Email: [email protected]
Monday - Friday 7:30 am - 6:00 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Dia
®
SLW-3512-1.5, SLW-3510-1.5
Two Handle Widespread Lavatory Faucet
Installation Brief
Model Number
☐
SLW-3512-1.5
Two Handle Widespread Lavatory
Faucet with Lift Rod and Metal Drain
Assembly
☐
SLW-3510-1.5
Two Handle Widespread Lavatory
Faucet without Lift Rod Hole and
Metal Drain Assembly
Replacement Parts
Part Number Item
handle assembly
handle
screw
collar
escutcheon
gasket
RL-058
*
aerator & removal tool
ow rates
2.2 gpm (8.3L /min)
1.5 gpm (5.7L /min)
0.5 gpm (1.9L /min)
LN-333-KIT
FLR-102-1.5-KIT
FLR-102-0.5
Lift rodLN-341
*
KN-113
identified
by groove
KN-114 (hot)
OFF = CW
KN-113 (cold)
OFF = CCW
valve cartridge
lift rod
stopper
P-100N
*
spout
aerator
*
Note: When ordering replacement parts for
faucets with an optional decorative nish, append
appropriate three letter nish sufx code to part
numbers marked with an asterisk (
*
).
handle assembly
collar
handle escutcheon
centerbody
1/2"-14 NPSM
1/2" valve body
washer
gasket
valve cartridge
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667
Monday-Friday, 7:30 am - 6:00 pm EST or check
our website at www.symmons.com for a list of
Symmons distributors.
gasket
aerator removal tool
(included)
pop-up drain assembly
RL-154LR
*
stopper included
washer
spout
retaining nut
2.0 mm
mounting nut
Parts Assembly Dia Two Handle Widespread Lavatory Faucet
ex hose assembly
(red stripe on hot hose)
ex hose adapter
(blue stripe
on cold hose)
1/2"-14 NPSM
Hole size
1-1/8" (29 mm) min
1-1/2" (38 mm) max
4" (102 mm) min
Flexible hose
2" dia
(51 mm)
8"(203 mm) min
16"(406 mm) max
Deck thickness
1-3/8" (35 mm) max
Note: Dimensions subject to change without notice.
2-3/8" (60 mm)
6-3/8"
(162 mm)
2-1/2" dia
(64 mm)
1" dia
(25 mm)
5/8" dia
(16 mm)
Hole size
1-1/2" (38 mm) min
1-5/8" (41 mm) max
3-7/8"
(98 mm)
6"
(152 mm)
1-7/8"
(48 mm)
5/8"
(16 mm)
5/8" (16 mm)
7-1/4"
(185 mm)
2-1/2"
(64 mm)
Dimensions Dia Two Handle Widespread Lavatory Faucet
For California Residents
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-1038 REV F ■ 012618
/
