Spray
on / off
Step 6
Flush supply lines
and check for leaks
finished deck
front view
Step 2
Attach faucet assembly
Step 5
Connect water supply lines
Step 4
Attach hose counterweight
Step 3
Connect pull-out spout hose
(optional)
HOT
COLD
Step 1
Place deck plate in position
typically used to cover holes
Quick Install Guide Fiano Kitchen Faucet, S-2630
2.5 mm
S-2630 ................. Chrome finish
S-2630-STN ........ Satin Nickel finish
S-2630-STS ......... Stainless Steel finish
Model Numbers
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 8:00 am - 7:30 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Kitchen Faucet S-2630
Installation and Service Instructions
Fiano
™
Step 1 Place and align deck plate (optional)
Typically used to cover existing holes when replacing faucet.
Install as required.
Step 2 Attach faucet assembly to deck
nished deck
front view
1
3
2
4
Step 3 Connect pull-out spout hose
Step 4 Attach counterweight to hose
cold supply hose
with blue stripe
hot supply hose
with red stripe
spout hose
with no stripe
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
25
13 1
0 1
6
1
~
25 inches
25 inch
c
c
c
c
c
c
c
c
c
c
c
c
1 12
12
c
c
c
1
(635 mm)
635 mm
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
14 15 1
4 15
Caution: If replacing an older faucet ensure water supply is
turned
OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2
Installation Instructions
Page 2
Step 5 Connect supply lines
Step 6 Flush supply lines and check for leaks
optional 3/8" to 1/2"
adapters included
red stripe (hot)
blue stripe (cold)
HOT
COLD
Care of faucet fi nish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Remove handle, collar and cartridge
Replace cartridge
Replace collar and handle
Valve cartridge replacement
2.5 mm
1
2
1
2
2.5 mm
Page 3Page 3
2-1/2"(63 mm)
10" (254 mm)
Deck plate (optional)
1-3/8" (35 mm) dia.
5-3/4" (147 mm)
Hole size
1-3/8" (35 mm) min.
1-1/2" (38 mm) max.
8"
203mm
9-11/16"
245 mm
14-5/8"
372 mm
2-1/4" (57 mm) dia.
12-1/8"
309 mm
Typical measurement when deck plate
is used to cover existing holes in deck.
1/4" (7 mm)
Flange (optional, used to give faucet
greater steadiness as required).
Finished deck thickness
3" (77 mm) max.
2-1/3" (58 mm) max.
with flange installed
Dimensions Fiano Kitchen Faucet with pull-out spout, S-2630
KN-4
Replacement Parts
Part Number Item
valve cartridge
Ordering replacement parts:
Symmons customer service: (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST
Symmons distributors: www.symmons.com
Parts Assembly Fiano Kitchen Faucet with pull-out spout, S-2630
pull-out spout
aerator
faucet body
base ring
base o-ring
deck plate
gasket
ange
u-washer
xing bolt
threaded
tube
counter
weight
pull-out
spout hose
cartridge
locking nut
collar
handle
screw
hot supply hose
with red stripe
3/8" to 1/2" adapter (2)
cold supply hose
with blue stripe
washer
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, (781) 843-3849
Website: www.symmons.com
■ Email: [email protected]
© 2007 - 2008 Symmons Industries, Inc. Printed in U.S.A.
■ ZV-537 ■ 071508
/
