G-Technology G-SPEED eS Installation guide

G-SPEED eS INSTALLATION GUIDE - Windows

G-SPEED™ eS

Windows

Installation Guide

G-Technology Inc.

Tel: (310) 449-4599

Fax: (310) 449-4670

[email protected]

P/N GSPEED eS v1.1PC

TABLE OF CONTENTS

1. INTRODUCTION (Pg 4)

2. SAFETY PRECAUTIONS

3. SYSTEM REQUIREMENTS

4. WHAT’S IN THE BOX

5. G-SPEED eS OVERVIEW

(Pg 5)

6. OPTIONAL G-TECH PCIe RAID CONTOLLER OVERVIEW

7. G-SPEED eS AUDIBLE ALARMS

(Pg 6)

8. SETTING UP G-SPEED eS WITH THE G-TECH PCIe RAID

CONTROLLER

(Pg 6)

9. SETTING UP G-SPEED eS USING THE WEB GUI

(Pg 12)

10. CONFIGURING TWO G-SPEED eS UNITS IN

RAID 5 MODE

(Pg 16)

11. WHAT TO DO IN THE EVENT OF A DISK

DRIVE FAILURE

(Pg 19)

12. TECHNICAL SUPPORT/LIMITED WARRANTY

(Pg 20)

APPENDIX A – DETAILED INFORMATION ON USING THE WEB GUI

APPENDIX B – EXPLANATION OF RAID LEVELS

APPENDIX C – NOTES

APPENDIX D – FORMATTING G-SPEED USING DISK MANAGEMENT

Pa

g

e 1

G-SPEED eS INSTALLATION GUIDE - Windows

Pa

g

e 2

G-SPEED eS INSTALLATION GUIDE - Windows

Pa

g

e 3

G-SPEED eS INSTALLATION GUIDE - Windows

1. INTRODUCTION

Thank you for purchasing G-SPEED eS from G-Technology,

Inc. (G-Tech)! Specifically designed for professional content

creation applications, G-SPEED eS features a high-speed

3Gbit/sec eSATA interface and when used in conjunction with

the optional G-Tech PCI Express (PCIe) RAID controller

provides RAID 0, 1, 5, 10 and JBOD functionality with

greater than 2TB support in Windows 32bit environments.

Up to four G-SPEED eS units can be attached to the G-Tech

RAID controller for storage capacities to 16 TB and data rates

over 600 MB/sec. G-SPEED eS supports multi-stream video

editing workflows.

2. SAFETY PRECAUTIONS

The disk drives contained in your G-SPEED eS are delicate

electronic instruments and are susceptible to damage due to

excessive physical shock. Place the unit in a vented area away

from moisture or liquids. Please handle the unit with care. Do

not open the case. Doing so will void the warranty. If the

Product is returned with damage caused by improper

handling, the warranty will be void and liability will rest with

the user.

3. SYSTEM REQUIREMENTS

• PCIe equipped workstation

• Microsoft Windows 2000/XP/2003/Vista

• G-Tech PCIe RAID Controller or third party port multiplier

aware eSATA host adapter

Optional G-Tech 4-port,

PCIe x4 RAID Controller

4. WHAT’S IN THE BOX

Take a moment to ensure that the following items are

included in the box. If anything is missing, please call G-Tech

at (310) 449-4599. Please keep the shipping container and

packing materials. In the unlikely event that you need to

return G-SPEED eS to us for any reason, you must use the

G-Tech shipping container. If the Product is returned

damaged caused by improper packaging, the warranty will be

void and liability will rest with the user.

• G-SPEED eS storage system

• 4 removable SATA drive modules (installed in unit)

• (2) disk module keys

• 1-meter eSATA cable

• AC Power cable

• Optional – G-Tech PCIe RAID controller

• Configuration Utility & Installation CD

Pa

g

e 4

G-SPEED eS INSTALLATION GUIDE - Windows

Pa

g

e 5

5.

G-SPEED eS OVERVIEW

6. OPTIONAL G-TECH PCIe RAID CONTOLLER OVERVIEW

The optional G-Tech PCIe RAID controller connects

G-SPEED eS to your PCIe equipped workstation and

provides RAID 0, 1, 5, 10 & JBOD functionality. You will

choose your level of RAID protection when you set up

the G-SPEED eS in Section 8. For an explanation of

supported RAID levels, please refer to Appendix B.

G-SPEED eS is also compatible with third-party Windows

port multiplier aware eSATA host adapters. Refer to your

host adapter documentation to set up G-SPEED eS with

these boards.

PCIe x4 interface

RAID Engine

(4) High-speed

3 Gb/s eSATA ports.

Supports up to (4)

G-SPEED eS systems

(4) Removable

Disk Drive Modules

Drive Module

Power/Activity

LED

Temperature/Fan RPM

Warning LED

Power Supply

LED

Disk Module

Lock Hole

ON/ OFF

Switch

Remo

AC Input

vable

Fan

3 GB/sec

eSATA

Port

Cable Lock

Hole

G-SPEED eS INSTALLATION GUIDE - Windows

Pa

g

e 6

7. G-SPEED eS AUDIBLE ALARMS

7.1 The G-SPEED eS enclosure is equipped with an audible

alarm that sounds when:

1. The internal temperature of the G-SPEED eS enclosure

reaches a temperature of 60° centigrade

and/or

2. When the main FAN fails or the RPM of the fan slows to

a state where the fan can longer adequately cool the

system.

In addition to the audible alarm, the Temperature/Fan

Warning LED located on the front bezel of G-SPEED eS

will illuminate.

If you hear an audible alarm and see the RED warning LED on

the front of G-SPEED eS, stop using G-SPEED eS immediately.

Check to see if the fan is spinning and move the unit to a

cooler location. If the problem persists, contact G-Tech

Support.

7.2 The G-Tech RAID controller is also equipped with an

audible alarm that sounds when:

1. A disk drive failure occurs

or

2. When the G-SPEED eS is removed from the RAID

controller without first selecting “Unplug” in the Array

Maintenance menu in the web GUI.

If you hear an audible alarm coming from the G-Tech RAID

controller, see Section 11 “What to do in the Event of a Disk

Drive Failure”. See Appendix B.1.7.2 for information on the

proper way to hot “Unplug” G-SPEED eS.

8. SETTING UP G-SPEED eS WITH THE G-TECH PCIe

RAID CONTROLLER

Connecting G-SPEED to your workstation and configuring

your system takes just a few steps as outlined below. For

this example we will be installing G-SPEED eS on a

Windows XP system. The installation is similar for

Windows 2000, 2003 and Vista.

8.1 Installing the G-Tech PCIe RAID Controller

1. Install the G-Tech RAID controller into an available PCIe

slot in your workstation.

2. Secure the RAID controller in place.

G-SPEED eS INSTALLATION GUIDE - Windows

8.2 Attaching G-SPEED eS to the G-TECH RAID Controller

1. Attach one end of the supplied eSATA cable to the eSATA

port located on the back of G-SPEED eS.

2. Attach the other end of the eSATA cable to Port 1 (port

closest to motherboard) on the G-Tech RAID controller as

shown below.

3. Attach the power cord to the back of G-SPEED eS and

connect the other end to AC power.

4. Power on G-SPEED eS.

8.3 Installing the G-Tech PCIe RAID Controller Software

There are three steps required to fully install the software

for the G-SPEED eS Controller.

1. Install the Windows driver

2. Update the Controller firmware

3. Installing the web GUI

Check for software updates at

http://www.g-technology.com/Support/

1. Install the G-SPEED eS Windows driver

a. Power on the workstation

b. Insert the G-Tech Product CD into the CD-ROM drive

When the CD loads a welcome screen may appear.

Close this window.

c. When the system boots the “Found New Hardware

Wizard” will appear. Select “Install from a list or specific

location” and click <Next>.

Pa

g

e 7

G-SPEED eS INSTALLATION GUIDE - Windows

d. Select “Don’t Search, I will choose the driver

to install” and click <Next>.

e. Click <Have Disk>.

f. Click on the <Browse> Button and navigate to the CD-

ROM drive containing the G-Tech Product CD. Continue

to “\Manuals-Drivers\G-SPEED eS\PC\GSeS Driver Win-

v1.0\” Select the folder for your operating system and

click <OK>.

g. Select “G-SPEED eS RAID Controller and click <Next>.

Pa

g

e 8

G-SPEED eS INSTALLATION GUIDE - Windows

h. When the Windows Logo warning screen appears

click <Continue Anyway>.

i. The RAID controller driver will install and the Wizard

will complete. Click <Finish>.

j. A new “Found New hardware Wizard” will open for the

“G-Tech RCM device.” Click <Next>.

k. As before, click on “Don’t search. I will choose the

driver to install.”

Pa

g

e 9

G-SPEED eS INSTALLATION GUIDE - Windows

l. Select “G-SPEED es RAID Controller” and click <Next>.

m. The RCM Device driver will install and the Wizard will

complete. Click <Finish>. This completes the driver

installation.

n. Remove the G-Tech Product CD.

o. Restart your workstation.

2. Update the G-SPEED eS Controller firmware

a. Insert the G-Tech Product CD into the CD-ROM / DVD

drive. When the disk loads a welcome screen should

appear. Click on the <Manuals / Drivers> link.

NOTE: If the Menu screen does not appear, the “autorun” feature

may not be enabled on your workstation. To load the menu

manually go to the START menu and click on “Run.” Enter the drive

letter of your CD-ROM containing the Product CD and then

“autorun.exe.” For example “D:\autorun.exe”

b. This will open Windows Explorer. Navigate to the

“G-SPEED eS\PC\GSeS Firmware-v2.2c” folder.

Double-click “hptflash.exe” to launch the flash utility.

Pa

g

e 10

G-SPEED eS INSTALLATION GUIDE - Windows

c. Click <Open...>.

d. Select “rr231.xpm.22c” and click <Open>.

e. Click <Flash!> to begin the update process.

f. When the process is completed click <OK>.

g. Remove the G-Tech Product CD.

h. Restart your workstation.

3. Installing the G-SPEED eS Web GUI.

a. Insert the G-Tech Product CD. When the disk loads a

welcome screen should appear. Click on the <Manuals /

Drivers> link.

Pa

g

e 11

G-SP

E

b

c

d

E

ED eS INST

A

b

. Navigate to

t

“Manuals-Dr

Double click

instructions,

. When the in

s

. The Web GU

your G-SPE

E

A

LLATION G

t

he folder:

ivers\G-SPEED

on “Setup.exe

”

accepting the

s

tallation is co

m

I is ready to b

e

E

D eS.

UIDE - Wind

o

eS\PC\GSeS

W

”

and follow th

e

defaults.

m

plete click <F

e

launched and

o

ws

W

EB GUI-vX.X”

e

onscreen

inish>.

configure

9. SE

T

m

a

e

G

w

s

d

9.

1

2

T

TING UP G-

S

T

he G-Tech RA

I

m

onitor the G-

a

ny web bro

w

e

quivalent.

T

G

-SPEED eS o

n

NOTE: W

built-in li

m

(2048GB)

.

w

ith a new technol

s

ize presented to t

h

d

isks of up to 16T

B

1 Accessing t

h

1

. Open your

w

https:

/

2

. The followi

n

<YES> but

t

NOTE:

save th

S

PEED eS USI

N

I

D controller

w

SPEED eS sys

t

w

ser such a

s

T

his section

w

n

a Windows w

o

indows 2000 / X

P

m

itation that logi

c

.

The G-SPEED e

S

ogy, Variable Sect

o

h

e operating syste

B

.

h

e G-Tech PC

w

eb browser a

n

/

/localhost:7

4

n

g Security Al

e

t

on.

For easy access t

o

e web address in

y

N

G THE WEB

G

w

eb GUI is use

d

t

em. The GUI

s

Safari, Inte

r

w

ill describe h

o

rkstation.

P

are 32 bit ope

r

c

al disks cannot

S

RAID Controller

o

or Size (VSS). V

S

m making it possi

b

Ie RAID Cont

n

d enter the fo

l

4

02

e

rt window will

o

the G-SPEED eS

W

y

our favorites

Pa

ge

G

UI

d

to configure

a

is accessed u

s

r

net Explorer

o

w to setup

r

ating systems wi

t

be greater than

o

vercomes this ba

r

S

S increases the s

e

b

le to now have lo

g

roller Web G

U

l

lowing addres

s

appear. Click

W

eb GUI

e

12

a

nd

s

ing

or

the

t

h a

2TB

r

rier

e

ctor

g

ical

U

I

s

:

the

G-SP

E

3.

E

ED eS INST

A

Enter “admi

n

as the Passw

o

Note: S

e

changing

A

LLATION G

n

” as the User

N

o

rd and click o

n

e

e appendix A.4.

the password.

UIDE - Wind

o

N

ame and “00

0

n

the <Login>

5 for instruction

s

o

ws

0

0” (four zero

s

button.

s

on

s

) 4.

T

he main sc

r

below. Each

o

the “Physical

Note:

T

formatt

and r

e

workst

a

NOTE:

feature

s

r

een of the w

e

o

f the four dri

v

Device Inform

a

T

he G-SPEED eS i

s

ed for Mac OSX.

T

e

-created to fu

n

a

tion. Section 9.2

Please refer to AP

P

s

of the G-

T

ech RA

e

b GUI will ap

v

es in the unit

a

tion

”

section

o

s

shipped initialize

T

his configuration

n

ction correctly

covers this proces

s

P

ENDIX A for detai

l

ID Controller web

Pa

ge

pear as show

n

a

re displayed i

n

o

f the GUI.

d as a RAID 0 arr

a

needs to be delet

e

on your Windo

w

s

.

l

ed information on

GUI.

e

13

n

a

y

e

d

w

s

the

G-SP

E

9.2

C

T

c

o

f

o

b

1.

2.

E

ED eS INST

A

C

onfiguring t

h

he G-SPEED e

S

o

nfigured in R

A

o

r an explanati

o

elow to setup

t

Launch the G-

T

Click on the “

M

below will app

Maintenance

W

A

LLATION G

h

e RAID level

S

/G-Tech RAID

A

ID 0, 1, 5, 10

o

n of RAID lev

e

t

he system

T

ech RAID Con

M

aintenance” L

i

ear. Click on

<

W

indow.

UIDE - Wind

o

of G-SPEED

e

controller com

b

and JBOD. (S

e

ls) Follow the

troller web GU

I

i

nk and the wi

n

<

Delete> in th

e

o

ws

e

S

b

ination can b

e

e Appendix B

directions

I

.

n

dow shown

e

Array

e

3

4

3

. Click the <

O

W

st

o

4

. The GUI wi

the <Creat

e

appear.

O

K> button to

p

W

ARNING:

T

his wil

o

red on G-SPEED

e

ll refresh and

e

Array> butto

p

roceed.

l delete any data

e

S!

the array is n

o

n. The “Creat

e

Pa

ge

o

w deleted. C

e

Array” page

e

14

lick

will

G-SP

E

5.

E

ED eS INST

A

The Create A

array and all i

t

a RAID 0 arr

a

select it from

Select RAID

“Array Name”

NOTE: In t

h

system can

a

selecting th

e

NOTE: Whe

n

the initializ

a

approximate

A

LLATION G

rray page is

w

t

s parameters.

a

y. (To set u

p

the dropdow

n

0 for “Array

T

h

is example we are

a

lso be set up in

R

e

appropriate setti

n

creating redunda

a

tion process take

s

ly 1hr 45m per TB

UIDE - Wind

o

w

here you co

n

In this exam

p

a different R

A

n

menu labele

d

T

ype”, enter

G

creating a RAID 0

R

AID 1, 5, 10 or JB

O

n

g in the “Array T

y

nt arrays (RAID 1

s

time. For RAID 5

of final capacity.

o

ws

n

figu

r

e the ne

p

le we will set

u

A

ID level simp

d

“Array Type.

”

G

-SPEEDeS f

o

array. The

O

D mode by

y

pe” pull-down.

or RAID 5)

it takes

w

u

p

ly

”

)

o

r

6

.

7

.

8

.

o

(

s

.

Click the <S

e

array.

.

T

o create an

enter the val

.

If you are cr

e

choose the

v

indicated in

t

NOTE: W

with a bui

than 2TB

o

vercomes this ba

(

VSS). VSS incr

e

s

ystem making it p

Ar

r

Up

2T

B

4T

B

8T

B

e

lect All> to q

u

array less tha

n

ue in MB in th

e

ating an arra

y

v

alue for Variab

t

he table belo

w

indows 2000 / X

P

lt-in limitation tha

(2048GB). Th

e

rrier with a new

t

e

ases the sector

s

ossible to now ha

v

r

ay Capacity

S

to 2TB

B

-> 4TB

B

-> 8TB

B

-> 16TB

u

ickly select all

n

the maximu

m

e

Capacity field

y

of Greater th

a

le Sector Size

a

w

.

P

are 32 bit ope

r

t logical disks can

e

G-SPEED eS R

A

t

echnology, Varia

b

s

ize presented to

v

e logical disks of

u

S

ector Size

512

1k

2k

4k

Pa

ge

the disks for t

h

m

available,

.

a

n 2TB,

a

s

r

ating systems

not be greater

A

ID Controller

b

le Sector Size

the operating

u

p to 16TB.

e

15

h

e

G-SP

E

9.

10

.

11

.

12

.

E

ED eS INST

A

Click <OK> o

n

.

Click the <C

r

initialize. A

p

been creat

e

.

The GUI will

r

completed init

NOTE: W

h

the initiali

approxim

a

.

Your G-SPEE

D

with your o

p

detailed inst

r

format the G-

S

A

LLATION G

n

the warning

m

r

eate> button

p

opup will ap

p

e

d and is no

r

eload indicati

n

ializing the RA

I

h

en creating redu

n

zation process tak

e

a

tely 1hr 45m per

T

D

eS is now re

a

p

erating syste

m

uctions on u

s

S

PEED eS for

W

UIDE - Wind

o

m

essage that a

and the arr

a

p

ea

r

confirmin

g

w initializing.

n

g that the G-

S

I

D 0 array.

n

dant arrays (RAID

e

s time. For RAID

T

B of final capacit

y

a

dy to be for

m

. See Ap

p

s

ing Disk Ma

W

indows XP.

o

ws

ppears.

a

y will begin

t

g

the array h

a

Click <OK

>

S

PEED eS has

1 or RAID 5)

5 it takes

y

.

m

atted for use

p

endix D for

nagement to

t

o

a

s

>

.

10.

C

F

a

C

ONFIGURIN

G

F

ollow the dir

e

a

rrays in RAID

1. Ensure tha

installed a

n

2. Attach bot

h

controller

a

your comp

u

3. Launch th

e

two units

a

will displa

y

G

TWO G-SPE

E

e

ctions below

5 mode using

t

t the G-

T

ech R

A

n

d the driver a

n

h

G-SPEED eS

u

a

s shown belo

w

u

ter

e

G-

T

ech RAID

a

ttached to the

y

information li

k

E

D eS UNITS

I

to configure

t

he G-

T

ech RAI

A

ID controller i

n

d web GUI ar

e

u

nits to the G-

T

w

, power the u

n

Controller we

G-Tech RAID

c

k

e that shown

b

Pa

ge

I

N RAID 5 M

O

two G-SPEED

D controller.

s properly

e

loaded.

T

ech RAID

n

its and restart

b GUI. With

c

ontroller, the

G

b

elow.

e

16

O

DE

eS

the

G

UI

G-SP

E

4.

C

N

5.

C

w

6.

C

7.

R

“

D

E

ED eS INST

A

C

lick on the “M

N

ame” GS Dis

k

C

lick the <Del

e

w

ill appear.

WAR

N

stored

C

lick the <OK

>

R

epeat the p

r

“

Maintenance”

D

isk 1_1. The

A

LLATION G

aintenance” lin

k

1_0. The win

e

te> button. T

h

N

ING: This will del

e

on G-SPEED eS.

>

button to del

e

r

ocedure for

G

link next to t

window below

UIDE - Wind

o

k next to the

a

dow shown bel

h

e following wi

e

te any data

e

te the array.

G

S Disk 1_1.

he array with

will appear.

o

ws

a

rray with “OS

ow will appear.

ndow

Click on t

h

“OS Name”

G

h

e

G

S

8.

9.

Click the <

appear.

lick the

C

<

arrays hav

e

the <Crea

t

window will

Delete> butto

n

WARNING:

T

his

stored on G-SPEE

<

OK> button

e

now been d

e

t

e Array> bu

t

appear.

n

and the foll

o

will delete any dat

D eS.

to delete the

e

leted as show

t

ton. The “

C

Pa

ge

o

wing window

a

array. Both

n below. Click

C

reate Array”

e

17

will

G-SP

E

ED eS INST

A

10.

In this windo

w

Select RAID

Enter G-SPE

E

Select Foreg

and Write B

a

Click <Select

<Create> bu

t

A

LLATION G

w

select the fol

5 for “Array Ty

E

D-eS-R5 for

“

round for “Ini

t

a

ck for “Cache

All> button to

t

ton to begin t

h

UIDE - Wind

o

lowing values

a

pe:”,

“

Array Name:”,

t

ialization Meth

Policy:”

select all disk

s

h

e initialization

o

ws

a

s shown:

od:

”

s

then click the

process.

1

2

1

3

1

4

1

. A popup wil

created and

2

. The GUI wil

initializing.

3

. The RAID

5

45m per

T

process is

c

5 and “Stat

4

. Your G-SPE

with your o

instructions

G-SPEED e

S

l appear confir

m

is now initiali

z

l reload indicat

5

initialization

p

T

B of final ca

c

omplete, the

G

us” as Normal

ED eS is now

perating syste

m

on using Di

s

S

for Windows

X

m

ing the array

z

ing. Click <O

K

ing that the G-

p

rocess takes

a

pacity. Once

G

UI will indicat

e

.

ready to be

f

m

. See Appe

n

s

k Manageme

n

X

P.

Pa

ge

has been

K

>.

SPEED eS is

a

pproximately

the initializa

t

e

“Type” as R

A

f

ormatted for

u

n

dix D for deta

i

n

t to format

e

18

1hr

t

ion

A

ID

u

se

i

led

the

G-SP

E

11. W

H

T

h

e

a

fa

i

re

F

o

1

2

3

E

ED eS INST

A

H

AT TO DO IN

h

e G-Tech RAID

a

ch of the disk

d

i

l

p

ure, an audibl

ort the failed

NOTE: If

G

(RAID 1,

5

However, t

drive shoul

o

llow the steps

1

. Launch the

2

. Mute the al

a

button.

3

. The GUI wi

An exclam

a

that the “

S

portion of

G-SPEED

e

In this e

to the G

connect

e

A

LLATION G

THE EVENT

O

controller con

t

d

rives in G-SP

E

e alarm will so

u

drive and its p

h

G

-SPEED eS was c

o

5

or 10), a drive

f

he array is now in

d be replaced as s

o

below to identi

web GUI.

a

rm by clickin

g

ll display infor

a

tion mark on

t

S

tatus” of the

the GUI ind

e

S unit has fail

e

xample there are

t

-

Tech RAID contro

e

d to Port 2 of the

UIDE - Wind

o

O

F A DISK DR

I

t

inually monito

E

ED eS. In the

u

nd. The web

h

ysical positio

n

o

nfigured in a pro

t

f

ailure does not r

e

an unprotected s

t

o

on as possible to

fy and replace

g

on the <Beep

e

mation like th

a

t

he G-SPEED

e

ar

r

ay is Crit

icates which

e

d.

t

wo G-SPEED eS u

n

ller. Drive 3 of the

G-Tech RAID cont

r

o

ws

I

VE FAILURE

rs the health o

f

event of a dis

k

GUI will also

n

.

t

ected RAID mode

e

sult in data loss.

t

ate and the failed

avoid data loss.

a failed drive.

e

r Mute>

a

t shown belo

w

e

S icon indicat

e

ical. The low

e

drive in whi

c

n

its connected

G-SPEED eS

r

oller has failed.

f

k

w

.

e

s

e

r

c

h

4.

Remove the

f

G-SPEED eS

controller) b

y

and gently sli

d

WAR

N

drive

conn

e

follo

w

conn

e

REM

O

LOS

S

ON G

X

f

ailed drive (I

n

connected t

o

y

inserting the

p

d

ing the drive

m

N

ING: Make abso

indicated by the

G

e

cted to the G-

T

ec

w

the cable to ensu

e

cted to on the RA

I

O

VING THE WRO

N

S

OF THE ARRAY

A

-SPEED eS.

n

this exampl

e

o

port 2 of t

h

p

rovided key i

n

m

odule out of

t

lutely sure that y

o

G

UI. If multiple G

-

h RAID controller,

re you know whic

h

I

D controller.

N

G DRIVE WILL

R

A

ND ALL OF THE

Pa

ge

e

Drive 3, of t

h

e G-

T

ech RA

n

to the lock h

o

t

he enclosu

r

e.

o

u remove the fail

e

-

SPEED eS units a

r

it is a good idea

t

h

Port # the array

R

ESULT IN THE

CONTENT STOR

E

e

19

he

ID

o

le

e

d

r

e

t

o

is

E

D

G-SP

E

5.

R

i

R

T

6.

O

N

12. TE

C

I

f

p

l

f

o

W

o

f

a

v

E

ED eS INST

A

R

eplace the fai

n place. Once

ndicate that

t

R

ebuilding an

T

he rebuild tim

O

nce the rebui

l

N

ormal and p

r

C

HNICAL SUP

f

y u encounto

e

l

ease contact

o

llowing ways:

phonTele

e

Fax: (31

0

E-mail: s

Internet:

W

hen contactin

g

f

your comput

e

v

ailable:

• r G-S

• atin

You

Oper

g

• Compute

• eSATA h

o

• Amount

o

• Other de

v

A

LLATION G

led drive with

the drive has

he array is r

e

d the percent

a

e is approxima

l

d is complete,

r

otecting your

v

PORT

e

r any difficul

t

G-Tech Techn

e

: (310) 449-

4

0

) 449-4670

upport@g-tec

h

http://www.g

-

g

Technical Su

p

e

r and have th

PEED eS serial

g

system and

v

r brand and m

o

st adapter bra

n

o

f memory inst

v

ices attached

UIDE - Wind

o

a new disk m

o

spun up to sp

e

building (The

a

ge complete)

a

tely 2 hours p

e

G-SPEED eS i

s

v

aluable data o

t

ies while inst

ical Support

v

4

599

h

nology.com

-

technology.co

m

p

port, make su

e following inf

o

number (on b

o

v

ersion

o

del

n

d and model

alled

to your compu

t

o

ws

o

dule and secu

r

e

ed, the GUI w

“Status” sho

w

a

s shown belo

w

e

r TB.

s

back to

nce again.

alling G-SPEE

D

v

ia one of t

h

m

/support

re to be in fro

n

o

rmation readi

o

ttom of unit)

t

e

r

e

ill

w

s

w

.

D

,

h

e

n

t

ly

13. L

I

G

a

u

s

G

R

o

r

t

P

a

s

M

t

G

b

o

e

w

G

F

a

G

(

I

T

R

P

D

I

T

H

T

I

MITED WAR

R

G

-

T

echnology I

a

ny defect in

u

se, for the d

e

s

hould becom

e

G

-

T

ech, will at

i

R

epair or repla

o

n an excha

n

r

econditioned.

t

he Property o

f

P

roduct has be

a

s a result of

s

ervice is avail

a

M

aterial Autho

t

he Product d

u

G

-

T

ech service

b

ear all shipp

i

o

ther costs,

e

ffe te rectua

p

w

arranty. All

G

-

T

ech in the o

F

or more infor

m

a

n RMA numb

e

G

-

T

ech at 165

3

(

310) 449-459

9

I

N THE EVENT

T

HE WARRAN

T

R

EMEDY SHA

L

P

ROVIDED AB

O

D

AMAGES, IN

C

D

ATA, ARISIN

G

I

MPLIED WARR

T

ECH AND, T

O

H

EREBY EXCL

U

T

O THE EXTEN

T

I

NJURY DAMA

G

R

ANTY

nc. (G-

T

ech)

w

material and

w

e

signated war

r

e

defective

w

i

ts discretion,

r

cement parts

o

n

ge basis an

All replaced p

a

G-

T

ech. This

w

en damaged b

y

unauthorized

a

ble to the pur

c

rization numb

e

u

ring the warr

a

facility or to

i

ng, packing

a

e

xcluding part

p

air, replacem

e

returned Pro

d

riginal shippin

g

m

ation on ho

w

e

r or to acquir

e

3

Stanford Stre

9

or support@

g

A PRODUCT B

E

T

Y PERIOD, TH

L

L BE REPA

I

O

VE. INCIDE

N

C

LUDING WIT

H

G

FROM BRE

A

ANTY ARE NO

T

O

THE EXTEN

T

U

DED BOTH F

O

T

NOT UNCON

G

E.

w

arrants your P

w

orkmanship,

r

anty period.

w

ithin the wa

r

epair or repla

c

o

r Products wi

l

d will be ei

a

rts or Product

s

w

arranty shall

n

y

accident, mi

s

service or p

a

c

haser by obta

e

r (RMA) and

a

nty period to

G-

T

ech. The p

a

nd insurance

s and labor,

e

nt or refun

d

uct must b

e

g

container.

w

to obtain wa

r

e

shipping ma

t

et, Santa Moni

g

-technology.c

o

E

COMES DEFE

C

E PURCHASE

R

I

R OR REPL

A

N

TAL OR CON

S

H

OUT LIMITAT

I

A

CH OF ANY

T

THE RESPON

S

T

PERMITTED

O

R PROPERTY

D

SCIONABLE, F

O

Pa

ge

roduct against

under normal

If the Product

r

ranty period,

c

e the Product.

l

l be furnished

ther new or

s

shall become

n

ot apply if the

s

use, abuse or

a

rts. Warranty

ining a Return

by delivering

an authorized

urchaser shall

costs and all

necessary to

d

under this

e

shipped to

r

ranty service,

t

erials, contact

ca, CA 90404,

o

m.

C

TIVE DURING

R

’S EXCLUSIVE

A

CEMENT AS

S

EPROUENTAL

I

ON LOSS OF

EXPRESS OR

S

IBILITY OF G-

BY LAW, ARE

D

AMAGE, AND

O

R PERSONAL

e

20

Page is loading ...

G-Technology G-SPEED eS Installation guide

G-Technology G-SPEED eS Installation guide

Related papers

Other documents