FläktGroup AP Bio Installation guide

FläktGroup
Brand
FläktGroup
Model
AP Bio
Category
Air purifiers
Type
Installation guide
AP BIO 400/500/1000/2400
AIR PURIFIER
OPERATION MANUAL
Content AP BIO
400/500/1000/2400
2FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
1 Unit type code ............................................................................. 3
2 Overview ...................................................................................... 4
2.1 Air purifier product line ............................................................................... 4
2.2 Packaged content ...................................................................................... 4
3 Safety and User Information ...................................................... 5
3.1 Availability of the operation manual ........................................................... 5
3.2 Scope of the operation manual .................................................................. 5
3.3 Symbols used ............................................................................................ 5
3.4 Safety instructions: warnings and danger symbols .................................... 6
3.5 Safety symbols ........................................................................................... 7
3.6 Safety at work ............................................................................................ 8
3.7 Intended use .............................................................................................. 8
3.8 Improper use .............................................................................................. 9
3.9 Safety standards and regulations .............................................................. 9
3.10 Modifications and changes ........................................................................ 9
3.11 Spare parts ................................................................................................ 9
3.12 Disposal ..................................................................................................... 9
3.13 Selection and qualifications of personnel ................................................... 9
4 Technical data ........................................................................... 10
4.1 Air purifier description .............................................................................. 10
4.2 Air purifier function ................................................................................... 12
4.3 Dimensions and technical data ................................................................ 13
4.4 Operating limits ........................................................................................ 14
4.5 Spare filters .............................................................................................. 14
5 Shipping and storage ............................................................... 15
5.1 Delivery .................................................................................................... 15
5.2 Transport .................................................................................................. 15
5.3 Storage .................................................................................................... 16
6 Installation ................................................................................. 17
6.1 Air purifier installation ............................................................................... 17
7 Operation ................................................................................... 18
7.1 Overview of controls ................................................................................ 18
7.2 Commissioning ........................................................................................ 19
7.3 Operation ................................................................................................. 20
7.4 Settings .................................................................................................... 20
8 Troubleshooting ........................................................................ 21
8.1 Operational malfunctions ......................................................................... 21
9 Maintenance .............................................................................. 22
9.1 Filter replacement .................................................................................... 22
9.2 Cleaning the air purifier ............................................................................ 25
10 Dismantling and disposal ......................................................... 26
10.1 Dismantling .............................................................................................. 26
10.2 Disposal ................................................................................................... 26
Declaration of Conformity .............................................................. 27
Legal note
The dissemination and reproduction of this document and the sale and disclosure of its content are prohibited unless
expressly permitted. Acting in conflict with this provision will result in liability for damages. All rights reserved in the event
of patent, utility model or industrial design registration.
AP BIO Unit type code
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 3
1 Unit type code
FläktGroup AP BIO air purifier AP 04 . B S C W 00 Z AP 04 FB
Product line
Size
Filters
Control system
Motor function
Cabinet
Additional features
Accessories
Product line
Size
Type
Product line AP BIO
Size
04 – AP BIO 400
05 – AP BIO 500
10 – AP BIO 1000
24 – AP BIO 2400
Filters B – Biological (antiviral and antibacterial)
Control system S – Standard control sys-
tem
Fan function C – Constant air flow rate
Cabinet W – Painted sheet steel – white
Additional features 00 – without
Accessories ZAP – AP BIO
Size
04 – AP BIO 400
05 – AP BIO 500
10 – AP BIO 1000
24 – AP BIO 2400
Type
Spare filters
FS – Set of ISO ePM1 55% and H14 filters (for 1 air purifier)
FP – ISO ePM1 55% filter (1 piece)
FB – H14 class HEPA filter( 1 piece)
Overview AP BIO
400/500/1000/2400
4FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
2 Overview
2.1 Air purifier product line
For detailed information about individual air purifier series refer to data sheets or the
quotation for the air purifier.
2.2 Packaged content
The following components are included in the packaging:
– An air purifier according to the designation on the unit identification plate
– An operation manual including all information about the supplied unit
– Any accessories and special equipment (only if ordered); for accessories supplied
separately see their operation manuals
Note!
Use only the documentation supplied with the unit for commissioning, maintenance
and servicing. Do not use general information, since this may not take account of
the individual components and special accessories that are actually installed.
AP BIO Safety and User Information
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to changes 5
3 Safety and User Information
This is an original operation manual verified by the manufacturer.
FläktGroup AP BIO air purifiers are developed and manufactured using state-of-the-art
engineering and technology and in accordance with EU technical standards and
regulations.
FläktGroup AP BIO air purifiers are safe to operate and meet high standards of quality.
Their technical level meets the strict requirements of users for easy maintenance and
servicing. However, each air purifier may pose unavoidable residual risks to users or
third parties resulting in damage to the air purifier or other property. So always adhere
to all safety instructions. Failure to follow safety instructions may result in a threat to
life and health, damage to the environment and/or large-scale damage to property.
Compliance with the safety instructions contained in this operation manual may help
prevent dangerous situations arising and ensure the economical and fully efficient use
of your air purifier. The safety factors described in this chapter apply to the entire
operation manual.
Any and all faults in the unit must be promptly remedied by an authorized service
centre!
3.1 Availability of the operation manual
In this operation manual you will find important instructions regarding the safe and
proper operation of your FläktGroup air purifier.
The operation manual is intended for use by fitting and installation companies,
engineers, technical specialists and operators.
This operation manual must be available at the installation site of the air purifier at all
times. Anyone operating the air purifier must make themselves familiar with the
information contained herein and adhere to it, with particular attention being paid to
safety instructions.
3.2 Scope of the operation manual
This operation manual contains information about the following areas:
– Assembly / Installation
– Commissioning / Operation and use
– Maintenance and troubleshooting
3.3 Symbols used
The following symbols are used throughout the text sections of this operation manual:
– This symbol indicates general information.
•This symbol indicates instructions for a specific activity.
This symbol indicates the results of a specific activity.
Attention
Damage to the air purifier!
In the event of air purifier alarms and faults always ensure that the cause of the
error is identified. Resetting an alarm manually without first dealing with the cause
of the fault may damage the air purifier and invalidate the warranty.
Note!
This symbol indicates reference to additional information on AP BIO air purifiers and
their accessories.
Recycling!
This symbol is used to indicate information about handling packaging materials and
worn-out components (separated according to recyclable materials).
Safety and User Information AP BIO
400/500/1000/2400
6FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to changes
3.4 Safety instructions: warnings and danger symbols
This manual uses the following designations / symbols to specify safety instructions.
3.4.1 Danger – Death / Serious permanent injury
This indicates an extremely hazardous situation resulting in death or serious injury
to persons unless safety instructions are adhered to.
Example:
3.4.2 Warning – Death / Serious injury
This indicates a very hazardous situation which may result in death or serious injury
to persons unless safety instructions are adhered to.
Example:
3.4.3 Caution – Minor or moderate injury
This indicates a hazardous situation which may result in a minor or moderate injury
unless safety instructions are adhered to.
Example:
Electric shocks may lead to death or serious injury!
•Isolate the air purifier from the power supply and make sure that it cannot be
reconnected.
•Prove that the air purifier is without any voltage. Earth it if necessary. Protect the
air purifier from voltages from other devices.
Contaminated filter surfaces!
When working on the air purifier or its components there is a health risk resulting
from contaminated filter surfaces.
•Wear hygiene-grade gloves and safety goggles.
•Wear a protective respirator mask
•When undertaking this work exercise due care and attention.
Risk of injury from sharp edges!
Exercise caution when cleaning as there is a risk of cuts from thin and sharp edges.
•Wear safety gloves.
AP BIO Safety and User Information
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to changes 7
3.4.4 Caution – Environmental damage
This indicates activities which may lead to damage to the air purifier or property.
Example:
3.5 Safety symbols
Attention
Attention
Environmental damage!
Heavily contaminated filters can have a negative impact on production processes.
Depending on the material used, contaminated filters are therefore classified as
hazardous waste and must be properly disposed of in accordance with the
directives and regulations in force.
Attention
Damage caused by static discharge!
While servicing the air purifier make sure that you discharge yourself of
static electricity before touching the electrical components.
Electrocution hazard!
This symbol indicates activities during which there is a risk of electrocution.
Personal injury!
This symbol indicates special instructions, commands and prohibitions to prevent
injury to persons!
Risk of injury due to suspended loads!
This symbol warns of injury and damage caused by suspended loads.
Risk of injury due to loads tipping over!
This symbol warns of injury and damage caused by loads tipping over.
Risk of injury due to rotating parts!
This symbol indicates instructions, commands and prohibitions which must be
observed; failure to do so may lead to injury or damage caused by the rotating parts
of the air purifier.
Risk of injury from sharp edges!
This symbol indicates instructions, commands and prohibitions which must be
observed; failure to do so may lead to injury or damage caused by sharp edges.
Damage caused by static discharge!
This symbol warns of activities which may pose a risk of damage to the control
system by static discharge.
Environmental damage!
This symbol warns of environmental damage and refers to environmental protection
regulations in force.
Damage to the air purifier!
This symbol indicates special instructions, commands and prohibitions to prevent
damage to the air purifier.
Contaminated filter surfaces!
This symbol warns of health risks caused by contaminated filter surfaces.
Safety and User Information AP BIO
400/500/1000/2400
8FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to changes
3.6 Safety at work
When assembling or servicing the air purifier on site, observe the following instructions:
•While performing work wear suitable protective clothing and safety boots, safety
gloves and safety goggles etc.
•Avoid open flames, particularly lit cigarettes. Sources of open flames and smoke in
the vicinity of the air purifier are prohibited. Filters, particularly when contaminated,
may easily catch fire.
General notes:
– If the air purifier is on and the impellers are still running, do not remove any covers
or panels from the air purifier.
– Before switching the air purifier back on, ensure that its covers and panels have
been properly secured in place.
While working in proximity to the power supply:
While performing other work:
•Follow the instructions for the installation and transport of FläktGroup air purifiers.
•Satisfy the pre-commissioning requirements for FläktGroup air purifiers.
•Always make sure FläktGroup air purifiers can be accessed only by authorized and
trained persons. If necessary, put suitable measures in place to prevent
unauthorized persons from handling the air purifiers.
3.7 Intended use
AP BIO air purifiers are for use indoors, i.e. in a standard environment according to
CSN EN 60721-3-3, and are intended solely for the filtration and decontamination of
indoor air.
•The air purifiers must not be operated by minors.
•The air purifiers may only be used in closed indoor environments.
•Protect the air purifiers from open flames.
•The air purifier may only be installed on a flat surface and safe electrical connections
must be provided.
Electric shocks may lead to death or serious injury!
•Isolate the air purifier from the power supply and make sure that it cannot be
reconnected.
•Prove that the air purifier is without any voltage. Earth it if need be. Isolate the air
purifier from voltages from other devices.
Contaminated filter surfaces!
When working on the air purifier or its components there is a health risk resulting
from contaminated filter surfaces.
•Wear hygiene-grade gloves and safety goggles.
•Wear a protective respirator mask
•When undertaking this work exercise due care and attention.
Risk of injury from sharp edges!
Exercise caution when cleaning as there is a risk of cuts from thin and sharp edges.
•Wear safety gloves.
AP BIO Safety and User Information
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to changes 9
The proper use of the air purifier includes adherence to the operation manual and the
inspection and maintenance conditions stipulated by FläktGroup.
3.8 Improper use
Any use other than that described above is deemed improper. The manufacturer /
supplier is not liable for damage resulting from improper use. The risk shall be borne
solely by the user.
3.9 Safety standards and regulations
When installing, making electrical connections, commissioning, servicing and carrying
out the maintenance of AP BIO air purifiers, it is necessary to observe the applicable
safety regulations, standards and generally recognised engineering best practice.
• CSN EN 60335-1 ed. 3 Household and similar electrical appliances
– Safety – Part 1: General requirements.
• CSN 33 1310 ed. 2 Electrical engineering regulations. Safety regulations for
electrical equipment intended to be used by persons without
any electric-engineering qualifications
• CSN 33 2000-1 ed. 2 Low-voltage electrical installations. Fundamental
principles, assessment of general characteristics
3.10 Modifications and changes
No changes or modifications may be made to AP BIO air purifiers.
If any changes or modifications are mode to the air purifiers, the declaration of
conformity shall become invalid, along with all warranty claims.
3.11 Spare parts
Only original FläktGroup spare parts may be used; FläktGroup is not liable for any
damage resulting from using other than original spare parts.
3.12 Disposal
After the end of their life cycles air purifiers and operating materials must be disposed
of in an environmentally-friendly manner depending on the type of material – see
chapter 10.2 “Disposal”.
3.13 Selection and qualifications of personnel
Ensure that each person operating and servicing the air purifier has read and
understood this operation manual in its entirety, especially the chapter about safety.
Once work has been started it is too late.
All qualified persons must be able to assess the work on the air purifier they have been
assigned and recognized and prevent all related risks.
Personal injury and damage to the air purifier!
FläktGroup air purifiers must not be operated
– outdoors,
– in explosive environments,
– in environments with a strong magnetic field and
– for industrial air filtration.
Technical data AP BIO
400/500/1000/2400
10 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
4 Technical data
4.1 Air purifier description
AP BIO air purifiers are equipped with a bio-decontamination filtration system with ISO
ePM1 55% (F7) and H14 filter class HEPA filters with the active virucidal agent
AirFend™ which filters out and decontaminates bacteria and viruses.
AP BIO air purifiers come fully assembled from the factory where they undergo a test
run to make sure they are easy and quick to install.
A performance test must be performed on site.
Directives and regulations The air purifiers comply with the following directives and standards:
– 2006/42/EC, the Machinery Directive
– (LVD) 2014/35/EU, the Low Voltage Directive
– (EMC) 2014/30/EU, the Electromagnetic Compatibility Directive
– Certified Quality Management System CSN ISO 9001
4.1.1 Air purifier components
Fig. 4-1 Air purifiers AP BIO 400, 500 and 1000
1: Control panel
2: Air inlet
3: ISO ePM1 55% (F7) pre-filter
4: Access panel with locks
5: Power socket with integrated main switch
6: Identification plate
7: H14 class HEPA filter
8: Fans with EC motors
9: Castors
10: Air outlet
AP BIO Technical data
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 11
Fig. 4-2 Air purifier AP BIO 2400
1: Control panel
2: Air inlet
3: Access panel (including air inlet)
4: ISO ePM1 55% (F7) pre-filter and H14 class HEPA filter
5: Power socket with integrated main switch
6: Identification plate
7: Castors
8: Air outlet
9: Castors with brake
10: Access panel locks
For detailed information about components used in various air purifier types refer to
data sheets or the quotation for the air purifier.
4.1.2 Air purifier control panel
Fig. 4-3 Air purifier control panel
1: Display
2: Air flow rate increase switch
3: Air flow rate decrease switch
4: MOD switch – operation mode settings
5: On/Off switch
For more information about data displayed on the control panel see chapter “7.1”.
1
5
4
3
2
Technical data AP BIO
400/500/1000/2400
12 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
4.2 Air purifier function
4.2.1 Air purifier AP BIO 2400
Fig. 4-4 Example of AP BIO 2400 function
1: Air inlet
2: Control panel
3: Filter replacement indicator
4: Fan with EC motor
5: Air outlet
6: H14 class HEPA filter
7: ISO ePM1 55% (F7) filter
The control panel (2) is used to set the air flow rate.
The fan with EC motor (4) creates a constant negative pressure in the air column.
Contaminated air is drawn through inlets (1) and flows through the first air filtration
stage with a ISO ePM1 55% filter (7) where dust particles and microbes are removed.
The second air filtration stage has a H14 class HEPA filter (6) treated with 100%
natural, biological decontaminating agent AirFend™ which decontaminates bacteria
and viruses.
Clean air is discharged through the air outlet with noise attenuator (5).
The filter replacement indicator (3) indicates filter contamination.
AP BIO Technical data
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 13
4.3 Dimensions and technical data
Fig. 4-5 AP BIO 400, 500, 1000 and 2400 air purifier dimensions
Tab.4-1 Technical data
Air purifier AP BIO 400 AP BIO 500 AP BIO 1000 AP BIO 2400
Air flow rate range (m3/h)
Min. Operating Max. Min. Operating Max. Min. Operating Max. Min. Operating Max.
100 150 400 100 200 500 200 400 1000 250 800 2400
Air velocity (filter) (m/s) 0.30 0.45 1.20 0.30 0.6 1.50 0.30 0.60 1.50 0.10 0.30 0.90
Sound power (dB (A)) 53 56 68 50 55 69 49 58 72 45 58 85
Dimensions (mm)
Width 435 435 740 690
Depth 435 435 435 640
Height 840 1245 1245 1625
Weight (kg) 37 46 66 116
Electrical data
Operating voltage 230 V AC, 50 Hz
Max. power input 180 W 180 W 350 W 1360 W
Technical data AP BIO
400/500/1000/2400
14 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
4.4 Operating limits
For all other important technical data not included in table 4-1 see the AP BIO 400/
500/1000/2400 air purifier brochure.
4.5 Spare filters
4.5.1 Filter specifications
Tab.4-3 Filter specifications
Max. operating temperature 45°C
Min. operating temperature 5°C
Max. operating air humidity 90%
Protection See the identification plate
Tab.4-2 Limits of operation
Note!
Relative air humidity with the air purifier running must not exceed 90%.
Note!
We recommend running AP BIO 400/500/1000/2400 air purifiers at an operating
air flow rate (see in table 4-1); for up to 10 minutes at the maximum air flow rate.
Air purifier
type
Filter dimensions
(mm) Filter class Filter frame
Filter
surface area
(m2)
Seal Order code
AP BIO 400 305 x 305 x 292 H14 Galvanized steel U-profile 6.5 PUR ZAP 04 FB
AP BIO 500 305 x 305 x 292 H14 Galvanized steel U-profile 6.5 PUR ZAP 05 FB
AP BIO 1000 305 x 610 x 292 H14 Galvanized steel U-profile 13 PUR ZAP 10 FB
AP BIO 2400 450 x 850 x 117 H14 Galvanized steel U-profile 14 PUR ZAP 24 FB
AP BIO 400 305 x 305 x 48 ISO ePM1 55% (F7) Plastic 1.6 -ZAP 04 FP
AP BIO 500 305 x 305 x 48 ISO ePM1 55% (F7) Plastic 1.6 -ZAP 05 FP
AP BIO 1000 305 x 610 x 48 ISO ePM1 55% (F7) Plastic 3.3 -ZAP 10 FP
AP BIO 2400 450 x 850 x 48 ISO ePM1 55% (F7) Plastic 6.7 -ZAP 24 FP
AP BIO Shipping and storage
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 15
5 Shipping and storage
5.1 Delivery
AP BIO air purifiers are supplied with castors and filters installed.
Upon receiving your air purifier check it for possible damage during transit and check
that it is complete against the delivery note (see chapter 2.2 “Packaged content”).
Take pictures of any visible damage to the air purifier in case of any complaint filed at
a later date.
5.2 Transport
•Before lifting or transporting the unit make sure that all attachment points are fixed
and secure.
•Use lifting tools with an adequate lifting capacity.
•Never used damaged lifting equipment.
•Ropes / chains must not be tangled and/or exposed to sharp edges.
•Use only ropes / chains of identical length.
•Only use the designated lifting equipment (provided on site).
•A girder with suitable load-bearing capacity must be used to ensure the stability of
the load being lifted and to prevent the lifting equipment from coming in contact with
the air purifier.
•Handle the air purifier slowly to avoid impact.
•Take such measures as to prevent damage to the air purifier casing.
•If necessary, use a specialised transportation company to move the air purifier.
Note!
Any missing parts of the air purifier and complaints related to damage it suffered
during transit can be dealt with only through shipping insurance, provided that such
damage is confirmed by the freight carrier.
Note!
We recommend keeping the air purifier in its original packaging for protection
and ease of handling during shipping and storage.
Do not remove the original packaging until immediately before installation.
Before commissioning, protect the air purifier from construction dust, dirt and
damage!
Risk of injury due to loads tipping over!
Due to their high centre of gravity some air purifiers may tend to tip over, causing
severe injury to persons or damage to property.
For the weight of your air purifier refer to the delivery documentation and its
identification plate.
Risk of injury due to suspended loads!
Never stand underneath suspended loads as there is always a risk of damage to
lifting equipment, pulleys, ropes or loops. Failure to observe safety measures may
result in death or severe injury.
•Wear protective clothing and a hard hat.
•Never stand underneath suspended loads!
Shipping and storage AP BIO
400/500/1000/2400
16 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
5.2.1 Transportation with original packaging
Transportation may only be carried out by trained personnel in compliance with safety
regulations in force. The air purifier may only be lifted using suitable lifting equipment
capable of carrying the entire weight of the air purifier.
Air purifiers must not be stacked.
Fig. 5-1 Transportation with packaging
1: Lifting equipment rope
2: Packaging label
3: Forklift
•Transportation using a forklift truck (3)
Place the fork underneath the bottom of the air purifier and adjust it to the widest
possible position.
•Transportation using lifting equipment (1)
If you want to lift the air purifier, run sufficiently long hoisting ropes and anti-slip
devices through the feet of the unit. To avoid damage to the air purifier make sure
that the hoisting ropes cannot rub against it.
•For your own safety wear gloves and safety boots during the lifting or transportation
of the air purifier.
5.3 Storage
Permitted storage conditions / permitted storage of uninstalled air purifiers
Air purifiers and filters containing virucidal agent AirFend™ must be stored in IE 12-
type warehouses complying with CSN EN IEC 60721-3-1 ed. 2 and must be protected
against the weather, in a dry and dust-free environment in compliance with the
following:
– Storage temperature range from -15°C to 46°C
– Air humidity up to 85% (relative humidity without condensation)
Note!
When transporting the air purifier refer only to the documentation supplied and
detailed dimensional drawings.
AP BIO Installation
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 17
6Installation
6.1 Air purifier installation
AP BIO air purifiers must be installed in a position that complies with the following
requirements:
– Ensure that the ground is level and that it can support the weight of the air purifier
so that there is no vibration or operating noise during operation.
– The air purifier must be installed in such a way so as to ensure only trained and
authorized personnel can access it. If necessary, put suitable measures in place to
prevent unauthorized persons from handling the air purifier.
– To achieve the best performance of the AP BIO air purifier it is desirable to position
it as close to the centre of its site as possible. Make sure the that air inlets at the top
of the air purifier are not covered; otherwise, its operation, power and noise levels
will be affected.
– Turn the air purifier to the required position and brake the front castors (AP BIO 2400
and AP BIO 1000).
– Connect the power supply. If necessary, use an extension cord compatible with the
power supply of the air purifier (see the identification plate).
Note on air purifier mounting and installation!
The placement, installation and mounting of the air purifier may only be carried out
by qualified personnel with proper professional training and experience and in
accordance with the applicable accident prevention regulations and other
generally recognized regulations regarding health and safety at work.
Note on moving the air purifier!
If FläktGroup air purifiers are moved from one site to another, it is necessary to
repeat the commissioning process.
Note!
When transporting the unit use only the documentation supplied or air purifier
dimensional drawings provided.
Note!
The HEPA filters supplied with the air purifier are packaged.
Before commissioning the air purifier these HEPA filters must be unpacked.
Operation AP BIO
400/500/1000/2400
18 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
7Operation
7.1 Overview of controls
7.1.1 Control panel
Fig. 7-1 Air purifier control panel
1: Display
2: Air flow rate increase switch
3: Air flow rate decrease switch
4: MOD switch – operation mode settings
5: On/Off switch.
7.1.2 Control panel display symbols
Fig. 7-2 Control panel display symbols
Attention
Damage to the air purifier!
The air purifier must not be commissioned unless the proper performance testing
has been carried out.
1
5
4
3
2
2
4
1
5
6
7
3
AP BIO Operation
400/500/1000/2400
FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications 19
Tab.7-1 Control panel display symbols
7.2 Commissioning
•Switch the main switch to the On position
see Fig. 4-1 Air purifiers AP BIO 400, 500 and 1000 – pos. 5
Fig. 4-2 Air purifier AP BIO 2400 – pos. 5.
•After a few moments the WAIT symbol disappears from the control panel display.
•Using the INCREASE switch to set the maximum required air flow rate.
•Let the air purifier run for 3–5 hours.
•Following the initial 3–5 hours of operation use the INCREASE or DECREASE
switch to adjust the air flow rate.
•When replacing AirFend H14 HEPA filters repeat the commissioning process
described above.
Pos. Symbol Description
1
Indication of time or air flow rate and units (m3/h)
Pressing the “MOD” switch will bring the air purifier to the
maximum power level – “booSt” mode
2
Fan status indicator
Light off = Fan is off
Light on = Fan is running
3
Operating mode status indicator
Light off = Manual mode – “booSt” mode on
Light on = Automatic mode
4Filter replacement indicator alarm
5
Status indicator light Switching the air purifier on / off using
a timer
Light off = Air purifier is off
Light on = Air purifier is on
6Day of the week indicator
7Air purifier operation timer is set
Note on initial commissioning!
– When the air purifier is switched on for the first time, the AirFend virucidal air
filtration system is activated.
– This will generate the smell of cloves and other biological substances.
– These smells are normal and do not constitute a reason for a complaint.
– These smells will subside after several days following commissioning.
– The activation of the AirFend virucidal air filtration system may cause an allergic
reaction.
Operation AP BIO
400/500/1000/2400
20 FläktGroup DC_10523GB_20201028_R1-06/2021 • Subject to modifications
7.3 Operation
•Switch the main switch to the On position
see Fig. 4-1 Air purifiers AP BIO 400, 500 and 1000 – pos. 5
Fig. 4-2 Air purifier AP BIO 2400 – pos. 5.
•After a few moments the WAIT symbol disappears from the display.
•Press the Off / On switch on the control panel.
•Use the MOD switch to select automatic or manual operating modes for the air
purifier.
•Using the INCREASE or DECREASE switch to adjust the required air flow rate.
•If you want to switch the air purifier to Standby mode, press the Off / On switch.
•If you want to switch off the power supply to the unit, switch the main switch to the
Off position
see Fig. 4-1 Air purifiers AP BIO 400, 500 and 1000 – pos. 5
Fig. 4-2 Air purifier AP BIO 2400 – pos. 5.
7.4 Settings
In automatic operating mode the air purifier’s air flow rate is indicated in m3/h, with the
required value remaining within the range shown in tab. 4-1 on page 13.
When the INCREASE or DECREASE switches are pressed in automatic mode, the
display shows the required value and, after several seconds, the actual air flow rate
(fan speed).
7.4.1 Air purifier timer switch function
Fig. 7-3: Control panel display menu
The unit’s automatic switching function can be activated using the following steps.
Pressing the “MOD” for approx. 3 seconds when the unit is on; this displays the “HOUr”
menu field. Set the current day of the week and time there. Confirm each step by
pressing the “MOD” switch, leave the menu by pressing the “OFF” switch.
The timer can be set by pressing the “MOD” for approx. 3 seconds again to move to
the “PrOG” menu where it is possible to set two switch-on / switch-off instances for the
air purifier for each day.
After completing the settings on the display, the timer is activated and deactivated by
pressing the “OFF” switch for approx. 3 seconds.
The “rESEt” function is used to return the air purifier to its factory settings. After that,
the air purifier’s parameters must be set according to its size. The setting parameters
are available from the manufacturer on request.
Note!
There is a delay of several seconds between the change of the required air flow rate
and the fan’s response.
Note!
If timer switching parameters are not set, the timer function cannot be activated.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

FläktGroup AP Bio Installation guide

FläktGroup
Brand
FläktGroup
Model
AP Bio
Category
Air purifiers
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents