© Midmark Corporation 2008
1
MA7828i
Podiatry Chair Upholstery Installation
Applies to Models:
646 (all)
647 (all)
Special Tools:
none
003-1838-00 Rev.A
To install seat / back section uphostery...
A) Raise back section of table approximately 30°.
B) Position front of seat uph. against mounting board.
C). Press seat section down firmly, then lay back section
into position and press down firmly.
Raise back section
approx 30°
To install foot section upholstery...
A) Position foot upholstery on mounting board.
B). Press down firmly.
Style A
© Midmark Corporation 2008
2
MA7943i
To install chair arms...
A) Position chair arm as shown.
B) Insert arm into socket until it locks in place.
To replace chair arm uphostery...
A) Remove two screws securing bottom cover.
B) Remove four screws securing upholstered pad.
C) Position new upholstered pad, then secure with four screws.
D) Position bottom cover, then secure with two screws
Midmark Corporation
For contact information, go to:
www.midmark.com
-
1
-
2
Midmark 647 Barrier-Free® Podiatry Procedures Chair Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Midmark 646 Podiatry Procedures Chair Wiring diagram
-
Midmark 647 Barrier-Free® Podiatry Procedures Chair Wiring diagram
-
-
Midmark 625 Barrier-Free® Examination Table Wiring diagram
-
-
-
-
Midmark International (Whip) Delivery User guide
-
-