2. Garth
  3. Side
Side

Garth Side Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Garth Side Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
How to replace the fascia
Step 1: Take out the bolt from the side burner injector bracket.
Step 2: Take out the 4 bolts on either side of the side burner shelf, as below.
Step 3: Loosen the front fixing screws 3mm on either side of the side burner shelf,
as the circles show.
Step 4: Take out the 4 screws as the picture circles on the left side shelf.
Step 5: Loosen the front fixing screws 3mm on the left side shelf, as the circles
show.
Step 6: Gently draw the fascia out as shown in the following image.
Step 7: Take out all the knobs.
Step 8: Remove all screws from the knob bezel.
Step 9: Replace with a new fascia.
Step 10: Reverse steps above to install the parts back. Please pay attention when
installing the fascia, so each injector on the manifold aims at the burner inlets.
/