Ivy Terrace IVTD212BL Installation guide

Brand
Ivy Terrace
Model
IVTD212BL
Type
Installation guide

This manual is also suitable for

11/19/2012
ASSEMBLY INSTRUCTIONS
DescriptionQty.
__(2) Front leg with arm (LH/RH)
Step 2
TOOLS NEEDED
Model: IVTD212
Attach arms to back leg assembly
using (2) 2½" screws
Attach back leg assembly to seat assembly
using (4) 3" screws
__(1) Back leg assembly
__(1) Hardware pack
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Long brace(LH/RH)
__(2) Short brace (LH/RH)
and footrest with (8) 3" screws
Attach legs to the seat assembly
Step 1
__(1) Foot rest
__(1) Seat assembly
Step 3
Attach braces between the front and back
legs with the remaining (8) 3" screws.
Note
: Compound angle cut on brace
should be attached to the back leg
12° Compound angle cut with
long edge on bottom
*Note: Braces are also RH and LH
15 1/8"
16 1/4"
RH
brace
Short
Long
brace
LH
4MM T-HANDLE HEX KEY
(INCLUDED)
20
A - .27 x 2-1/2 SOCKET WAFER"A"
B - .27 X 3 SOCKET WAFER "A"
2
  • Page 1 1

Ivy Terrace IVTD212BL Installation guide

Brand
Ivy Terrace
Model
IVTD212BL
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents