Extron Angle Mount Kits Template

Outer edge of

TLS Pro 525M

Bottom edge of AMK 1 rear panel

(see AMK 1, AMK 2, and AMK 3 Installation Guide)

Alignment Template for the Extron

AMK 1

(for mounting TLS Pro 525M and TLP Pro 525M)

Page size: 8.5" x 11"

Print scale 1:1

Do not shrink.

1. See the Extron AMK 1, AMK 2, and

AMK 3 Installation Guide for

complete instructions.

2. Double-check the print settings

before printing. Make sure the scale

settings are 1:1.

3. After printing, check that the bottom

edge of the AMK 1 rear panel

(solid red line) is 3.18" (81 mm).

P/N 68-3423-01 Rev. B

2.66"

68 mm

CATx cable entry

Adhesive Patch

Top edge of AMK 1 rear panel

(see AMK 1, AMK 2, and AMK 3 Installation Guide)

This manual is also suitable for