Page is loading ...
5
6
Gaia Outdoor Box IP Camera
Model No.: SP5574HDC/ SP5575HDC
Quick Installation Guide
Web Configuration
1. Open the Web browser on your computer (for example,
Microsoft Internet Explorer in this guide)
2. Type the default IP address (192.168.1.2) or the IP address
found by IP Finder in the Address bar, and then press
[Enter].
3. When the login window appears, enter the default User
name (root) and password (pass) and press OK to access
to the main screen of the camera's Web Configuration.
1.
1.
1.
1.
1.
4. Enable the top-right side icon in the live viewing page to
access to the further settings, and then the configuration
page will be shown for your further setup.
Note: For more information, please refer to the Advanced
Installation Guide on the provided Installation CD-ROM.
For details of operating Ultra View, please refer to the Software
Manual on the provided Installation CD.
If you have any problem on the product(s), please contact
your local authorized dealer.
4.
4.
7
P/N: 2300-0593
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
Accessing the Camera
Using IP Scan
1. Please insert the CD into your CD-ROM and click Utility
Software from \\IP Scan\ IPScan-2.2.0.exe to launch the
utility.
2. The control panel will appear as below and click
3. Once you get the IP address of the camera, launch the Web
browser to access your camera.
1.
1.
1.
Web: www.micronet.com.tw
Introduction
The Micronet Gaia Fixed Dome series
(SP5574HDC/SP5575HDC) is an H.264/MPEG-4/MJPEG dual
streaming IP Camera, powerful complete features (IR LED, 2-
way Audio, Digital I/O, RS485) that provides the superior-quality
image, flexibility and Scalability for IP network surveillance
solution.
Package Contents
Before you start installing the device, verify the following items
are in the package:
One Gaia series Outdoor Box IP Camera
One Quick Installation Guide
One Installation CD
One Screw package
Wall mount bracket
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista
Resolution: SVGA or XGA with 1024 x 768 Resolution
System: DirectX 9.0C or Above
User Interface: Microsoft® Internet Explorer 6.0 or above
1
3
4
2
Hardware Installation
Step 1: Wall mounting
SP5575HDC: Use the L-screws to release the wall mount, feed
power adaptor and LAN cable through wall mount bracket.
DC 12V,1.5A
Audio In
Audio Out
RJ-45 Ethernet
Digital Input &
Digital Output
SP5574HDC/SP5575HDC: Fix the camera to the bracket with
four supplied screws.
SP5575HDC
SP5575HDC
Step 2: Connecting the Camera to LAN
Use the Ethernet cable to connect the camera to your local
area network (LAN).
When you connect the power adapter, the camera is powered
on automatically. You can verify the power status from the
Power LED on the RJ-45 connector of the camera.
Once connected, the Link LED stops flashing but shines red
light and the camera is on standby and ready for use now.
Video Out
SP5574HDC
/
