5
6
Gaia Outdoor Box IP Camera
Model No.: SP5571HDC/SP5572HDC/SP5573HDC
http://www.micronet.info
Quick Installation Guide
Web Configuration
1. Open the Web browser on your computer (for example,
Microsoft Internet Explorer in this guide)
2. Type the default IP address (192.168.1.2) or the IP address
found by IP Finder in the Address bar, and then press
[Enter].
3. When the login window appears, enter the default User name
(root) and password (pass) and press OK to access to the
main screen of the camera's Web Configuration.
1.
1.
1.
1.
1.
4. Click Setup bottom on the top-right corner and then the
configuration page will be shown for your further setup.
Note: For more information, please refer to the Advanced
Installation Guide on the provided Installation CD-ROM.
For details of operating Ultra View, please refer to the Software
Manual on the provided Installation CD-ROM.
If you have any problem on the product(s), please contact your
local authorized dealer.
4.
7
P/N: 2300-0591
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
Accessing the Camera
Using IP Finder
1. Insert the Installation CD-ROM into your computer's CD-
ROM drive, and find the IP Scan fold.
2. Click the IP Scan item to launch the utility, and the control
panel will appear as below.
3. Click on Scan to show IP address of the camera.
4. Once get the IP address, and then launch the Web browser
to access your camera.
1.
1.
4.
Introduction
The Micronet Gaia Fixed Dome series
(SP5571HDC/SP5572HDC/SP5573HDC) is a H.264/MPEG-
4/MJPEG dual streaming IP Camera, a powerful complete
features (IR LED, 2-way Audio, Digital I/O, RS485) that provides
the superior-quality image, flexibility and Scalability for IP
network surveillance solution.
The Pressure Die-cast Aluminum Housing, Automatic Defogging
Glass and build in heater makes
SP5571HDC/SP5572HDC/SP5573HDC be reliable and suitable
for critical working environment.
Package Contents
Before you start installing the device, verify the following items
are in the package:
Gaia series Indoor Box IP Camera
Quick Installation Guide
Installation CD-ROM
Tool Kit
USB Cable
BNC Cable
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
Accessing the Camera using Web Browser
CPU: Pentium 4, 2.4GHz or Above
RAM: 512MB
Resolution: SVGA or XGA with 1024 x 768 Resolution
System: DirectX 9.0C or Above
Installing the Camera
Use the screws to install the camera on the wall thru three holes
on the base stand of camera.
1
3 4
2
Power on SP5571HDC/SP5572HDC/SP5573HDC by using
power source as following:
SP5571HDC-24/SP5572HDC-24/SP5573HDC-24 :
Only 24Vac input
SP5571HDC-80/SP5572HDC-80/SP5573HDC-80 :
90~240Vac input
Connecting the Camera to LAN
Use the Ethernet cable to connect the camera to your local area
network (LAN).
When you connect the power adapter, the camera is powered
on automatically. You can verify the power status from the
Power LED on the RJ-45 connector of the camera.
Once connected, the Link LED stops flashing but shines red
light and the camera is on standby and ready for use now.
SP5571HDC/SP5572HDC/SP5573HDC
1. Power Cord
2. RJ-45 Ethernet with LED indicators
3. Line Out audio jack
4. Digital in / Digital Out terminal
5. Line in audio jack
1 2 3 4 5
/
