MicroNet SP5561HVM Quick Installation Guide

MicroNet
Brand
MicroNet
Model
SP5561HVM
Type
Quick Installation Guide

This manual is also suitable for

5
Gaia Indoor Box IP Camera
Model No.:SP5561HDC/SP5561HVM/SP5561HVC/SP5562HSM/
SP5562HWC/SP5563HFMModel No.:
Quick Installation Guide
7
P/N: 2300-0587
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
6
B. USB setup
1. Connect camera to PC via a
mini USB cable
Windows will pop up a dialog
“Found New hardware”and
another pop up window
shown below. Select “Config
Wizard” and press ok
1.
1.
1.
1.
1.
1.
3. To Login type in
ID: root / Password: pass 1.
Step 4: Access the Camera
1. Open the Web browser on your computer eg. Internet
Explorer
2. On the Address bar type in the default IP address
192.168.1.2 or the IP address found by IP Scan Utility and
press [Enter].
3. When the login window appears, enter the default user name
root and password pass and press OK to access to the
camera's web configuration screen.
Default IP address: 192.168.1.2
User name: root
Password: pass
1.
1.
1.
1.
1.
4. Click Quick Wizard to setup network configuration
4. Click Setup button on the top right
hand corner to enter advanced
setup configuration.
4.
4.
Note: For more information, please refer to the Advanced
Installation Guide on the provided Installation CD-ROM.
For details of operating Ultra View, please refer to the
Software Manual on the provided Installation CD-ROM.
If you have any problem on the product(s), please contact
your local authorized dealer.
Note:
Note:
Note:
Web: www.micronet.com.tw
1
3
4
2
Introduction
The Micronet Gaia Indoor Box series
(SP5561HDC/SP5561HVM/SP5561HVC/SP5562HSM) is a
H.264/MPEG-4/MJPEG dual streaming IP Camera, a powerful
complete features (2-way Audio, Digital I/O, SD socket, USB
port for external Wifi adapter) that provides the superior-quality
image, flexibility and Scalability for IP network surveillance
solution.
The advance Progressive Scan technology
(SP5561HVM/SP5561HVC/SP5562HSM/SP5563HFM)
presents much clearer image for moving objects by capturing
whole image at once. Carrying supreme Megapixel image
sensor (SP5562HSM/SP5563HFM), it delivers over triple higher
resolution and more detail of image/video.
Package Contents
Before you start installing the device, verify the following items
are in the package:
1 x Gaia series Indoor Box IP Camera
1 x Quick Installation Guide
1 x Installation CD-ROM
1 x Power Adapter
1 x USB Cable
1 x Mini Din Cabl
System Requirement
Platform:Microsoft® Windows® 2000/XP/Vista/7
CPU: Pentinum 4, 2.4GHz or Above
RAM: 512MB
Resolution:SVGA or XGA with 1024 x 768 Resolution System:
DirectX 9.0C or Above
Browser: Microsoft® Internet Explorer 6.0 or above
USB: 1.0 or Above
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g (for external Wifi adapter)
Step 1: Installing the Camera Lens
Line up the lens to the installation
position and turn it clockwise until
it is fixed firmly.
Please note The Gaia Indoor Box
Camera supports CS-mount
standard lens.
Step 2: Installing the Camera Stand
On the camera there are one screw hole
on each side, one on the top and
one on the bottom. The camera
stand can be mounted on
either side.
Resolution:
Step 3: Setup the Camera
There are 2 ways to setup the Camera LAN/USB
A. LAN setup
1. Connect the AC power adapter to the camera, the camera
should power on automatically.
To verify the power status, the Power LED on the back
panel of the camera sholud be blinking red.
2. Connect the camera to your local area network (LAN) via
an Ethernet cable.
Once connected, the red Power LED stops blinking and
becomes a steady red light. .
A.
A. 1.
A. 1.
A. 1.
A.
A. 1.
A. 1.
A. 1.
3. Using IP Scan Utility, Insert the Installation CD into your
computer's CD-ROM drive and locate IP Scan Utility from
your CD-ROM directory \IP Scan\IPScan.exe
Launch IP scan utility as shown below.
4. Click Scan to scan the IP address of the camera by default
the IP address is 192.168.1.2
To modify the network setting of the camera click
Change setting (Optional)
3.
3.
3.
3.
3.
3.
Connecting the Ethernet Cable
USB
  • Page 1 1
  • Page 2 2

MicroNet SP5561HVM Quick Installation Guide

MicroNet
Brand
MicroNet
Model
SP5561HVM
Type
Quick Installation Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents