Sapido CS104x Quick setup guide

Brand: Sapido

Model: CS104x

Type: Quick setup guide

Quick Installation Guide

( v1.0 )

Smart Cloud Security

Security Alarm System

CS104x

Open the battery cap on the backside of the device --> Install 2 * AAA 1.5v batteries

in MDKA0z --> Switch to ON and close the battery cap

MDKA0z

Power on WDG71n Cloud Environment

Sensor Router and wait for 30 seconds

till the “ZigBee” and “Wireless/WPS” LED

turn green

WDG71n

IPJC2n

Power on IPJC2n and wait for 30 seconds

till the “Wireless/WPS” and

the Power LED turn green

224

DDLA0z

WDG71n

IPJC2n

MDKA0z

Please create your “IOT Name”.

For example: “My Home Security”

Please enter the default password “admin” ,

then Click Change Password to setup your new

password.

“IOT Setting”

Power on all devices and the Security Alarm System will auto connect together.

Click “New IOT” and wait for the connection.

Find Sapido APP icon and Click “New IOT”

You'll see Security Devices on the list.

Choose “WDG71n” to Rename the device.

You'll find the New IOT Account in APP login page.

(Green)Online

(Grey)Offline

(Red)Alert Message

Change Password

(Green)Armed

(Red)Alarm

(Grey)Disarmed

Delete IOT Account

Step 2.Download APP

Android

Complete the APP Installation

and you'll find Sapido Icon

on smartphone screen

Sapido

Go to Google Play Store

Search for “Sapido” and

Download

Go to Smartphone/Tablet's

Settings ->WiFi ->Search

for WDG71n WiFi signal

Connect to WDG71n

WALL MOUNT HOLE

R - ROUTER MODE

A - AP MODE

W - WIRELESS AP MODE

RECORDING BUTTON

INFRARED NIGHT VISION LED

CAMERA LED

SPEAKER

WPS

BUTTON

Wireless/

WPS LED

WAN

LED

LAN

LED

POWER

LED

MICROPHONE

SPEAKER

LED

USB FLASH DRIVE

ANTENNA

R/A/W

MODE SWITCH

WAN

PORT

LAN

PORT

VOLUME

RESET

Micro USB

POWER PORT

DDLA0z

Lift open the battery cap --> Install 2 * AAA 1.5v batteries in DDLA0z, put the battery

cap back on top --> Switch to ON

ZigBee

Power on all devices and activate the Smart Cloud Security System to set off

alarm and APP push notification and 30 seconds video event recording. Turn

on Alarm or broadcast your voice to deter the intruder via the speaker to keep

home safe and secure.

CS104x Application

Infrared Motion Sensor

Alarm

voice siren

Rename and “Apply” Click “Back” to the previous page.

Hardware Content

Step 1-1.

- WDG71n Cloud Environment Sensor Router - Temperature/Light/Sound

- MDKA0z Cloud ZigBee Infrared Motion Sensor

- DDLA0z Cloud ZigBee Door&Window Magnetic Sensor

- IPJC2n Smart Cloud Night Vision Camera with Audio Wireless Router

MODEM

100V~240V

ADAPTER

POWER

R/A/W

MODE SWITCH

WAN/

LAN

RESET ZigBee

BUTTON

ZigBee

BUTTON

WIRLESS/WPS

LED

WAN/LAN

LED

ON/OFF

POWER

SWITCH

WALL MOUNT HOLE

TEMPERATURE

SENSOR

SOUND

SENSOR

LIGHT SENSOR

WPS BUTTON

Hardware Installation

Step 1-2.

iOS

Complete the APP Installation and

you'll find Sapido Icon on

smartphone screen

Go to APP Store. Search for “Sapido”

and Download.

Go to Smartphone Settings

Wi-Fi Connect to WDG71n

Connect to Sapido WDG71n WiFi network, it

will pop out the login page, please select

“Cancel” and “Use Without Internet”.

Step 3.IOT Setting

Change password

A B

WDG71n_d12345

ARM your alarm system when you are away from Home.

Whenever WDG71n detects abnormal sound or movement, it will

trigger alarm and send you the APP Push Notification at the

same time.

Step 4.Internet Setting Step 5. Application

Connect the Ethernet cable to WDG71n's WAN port

Setup the internet connection, and you'll receive the Sapido APP Push

Notification on Smartphone or control security device when you are

Away.

If you don't have 3G/4G network,

please connect WDG71n Wi-Fi to

check the Internet Settings

Password

Enter Password

Enter The Password For “Sapido_WDG71n_d12345”

Cancel

Open Sapido APP and you'll

see the IOT account

1.View the real-time scene

and receive sound remotely

2.Click Voice Sender and the

microphone “” will

appear on the screen to

communicate immidiately

3.Click “” to stop

communication and back

to sound received mode

Two-Way communication. Sending voice through the speakers of IPJC2n.

Voice Sender

4x Digital Zoom

Screen Zoom in function available to view the certain area clearly.

Record/View Videos

To take the real-time event recording and view videos that saved in the USB flash

drive of IPJC2n.

3. Select the video to review.2.Stop recording. Click View

Videos “ ” to view the

videos.

1.Click “ ” to record. The

red spot “ “ recording will

appear on the top left corner.

Schedule

Set up the Record / Alarm / Play schedule

2.Click New on the top right

corner to enter the Schedule

setting (as above picture).

Set up the schedule, time

and day and click ”Done” .

1.Click “” to set up

schedule.

You can set up Music schedule as alarm.

3.When the schedule is

successfully added, go

back to Schedule setting.

If you want to set up a

new schedule, please

click New.

Edit the schedule.

Delete the schedule.

Click “Setting” on the top right corner for advanced setting.

Sapido IOT Application- Camera

Enter Sapido main menu and click Camera.

Motion Detect ScreenshotPlay Record Schedule

Sound Detect Arm View Picture View Vedio Voice Sender

When it detects

abnormal movement,

it will record and send

push notification.

Capture the screen.Play music from the

USB flash drive.

When you find the

intruder, you can

click "Ar" to deter

the intruder.

Take the real-time

event recording

(avi format)

When it detects the

abnormal sound, it will

record and send push

notification.

View videos that

recorded by IP

camera.

Set up the record/

alarm/music

schedule.

Sending voice to

broadcast from

the speaker.

View pictures that

captured by IP

camera.

Camera Features by Sapido App

Setting

Arm

1.Click Arm “” to create

alarm sound to deter the

intruder.

2.Click Setting to select

different sirens.

3.Select Siren from five

default sirens.

You can add new siren by UPLOAD feature.

3 Screenshot/ View Pictures

Screenshot the event and view pictures.

1.Click Screenshot “ ” to

capture the photo

immediately.

3.Select picture to view.

2.Click View Pictures “”

to view pictures.

Sound Detect

Same as Motion Detect

Click “” and the “”will

appear on the screen to

start sound detection

You can start Motion Detect and

Sound Detect function simultaneously.

Play

Play the music of USB flash drive.

2.Select the music and click

to play music. Click “Chang”

to select the mode of play

Ex. Play in order/ Shuffle/Timer.

1.Click “” to play music

to adjust the volume

3.When the warning sign

appears in front of the domain,

click to quick view the event

video

1.Click “” and the “ ”will

appear on the screen to

start motion detection

Motion Detect

When IPJC2n detects abnormal movement, it will take the real-time event recording

for 30 seconds and send push notification to your smartphone. You can quick view

videos that are saved in the USB flash drive of IPJC2n automatically.

2.Receive the push notification

and log in APP to view the

event message

Today All Missed

Sapido 2 mins ago

Sapido

My Home Security: 2F window OPEN

Taday All Missed

Sapido

2 mins ago

Sapido

My Home Security: 2F window OPEN

Go to “Internet Setting” in APP main page,

it will automatically detect the WAN type (Internet)

It will direct to the setting

page.

For xDSL Setting, please

enter the username and

password provided by ISP.

Wireless Encryption WPA2

is recommended with at

least 8 letters/numbers.

Click Apply to complete

the Internet Settings.

(Please remember your

WiFi Password)

New IOT

After the internet setup,

you'll be guided to the first

smartphone 3G/4G

network to login APP and

check the Internet Settings.

Today All Missed

Sapido 2 mins ago

Sapido

My Home Security: 2F window OPEN

1 2 3

APP Push Notification

IOT Account Name

Device Name

For example: Window&Door

Sensor, Motion Sensor...etc.

Event

For example: Window&Door Sensor OPEN

Motion Sensor Detect Movement

Your smartphone will receive

the APP push notification

when the alarm is triggered.

Click the APP push message

to enter the IOT security APP.

Message Description as below,

If you are just at home when the alarm triggered,

you can press the ZigBee button (of WDG71n)

right away manually to turn off the alarm.

1st Method to turn off the Alarm

2nd Method to turn off the alarm

3rd method to turn off the alarm

Step1.

When the warning sign “ ”

appears in front of the domain,

this shield sign will turn to red

color. Click the red shield sign

“ ” to turn off the alarm, the

shield will change to green. Enter

the IOT account, then quick view

the “Cloud Message”.

Step2.

You can Quick View the

event message, and

sort the event list by the

date and time.

Step3.

Click the specific event

message to view the 30

secs event recording

and turn off the alarm.

Step1.

When the warning

sign “ ” appears

in front of the domain,

this shield sign will

turn to red. Enter

the IOT account, then

quick view the

“Cloud Message”.

Step2.

Enter "Cloud Message"

and select the

specific event to

check the detailed

information on the

event page.

Step3.

Click the silence

sign “ ” to turn

off the alarm

immediately.

Step4.

Back to APP login page,

you will see the shield

of the security system

which turns to green

. It means the

alarm turned off and

the security system is

operating.

Sapido CS104x Quick setup guide

Sapido CS104x Quick setup guide

Sapido CS104x Quick setup guide

Related papers

Other documents