Assa Abloy Yale Easy Fit EF Series Quick start guide

Brand: Assa Abloy

Model: Yale Easy Fit EF Series

Type: Quick start guide

Wirefree 2.4GHz Yale EF-RS

Room Sensor

Description:

1) Learn/Test Button

Send test signal: hold and release within 3 secs.

Send temperature/humidity info: hold and

release within 3 secs to immediately update

system.

BackLight On: hold and release within 3 secs.

Send learn signal: hold for 10 secs+.

2) Temperature and humidity sensor.

3) 3x 1.5V AAA Alkaline batteries.

Pack contents

• 1 x Room sensor.

• 2 x wall plugs & screws.

• 3 x 1.5V AAA Alkaline batteries

Please note supervision is always enabled on

this sensor (30 minutes+ interval).

18.

Programming & installation

Program your Room Sensor before installation

and test afterwards. Please see your current

system instruction book.

Easy Fit EF-Series Alarm System

For use with

SmartPhone Alarm only

(HSA6092)

Operation

This accessory can be used to measure room

temperature and humidity. This information is

displayed on the device’s LED screen and the

SmartPhone app.

WARNING:

When you delete the Room sensor from the

system, please ensure the room sensor batteries

are removed to avoid unnecessary drain.

Specication

Environmental conditions:

-10c to 40c , relative humidity 85% non-

condensing. Indoor use only

Radio:

2.4GHz

E3 08/13

RoHS

Note: Waste electrical products and batteries

should not be disposed of with household waste.

Please recycle where facilities exist. Check with

your local authority or retailer for recycling advice.

For the full warranty statement please refer

to the HSA6092 manual or visit

www.Security-merchants.com

2 Year Warranty:

Assa Abloy Yale Easy Fit EF Series Quick start guide

Assa Abloy Yale Easy Fit EF Series Quick start guide

Assa Abloy Yale Easy Fit EF Series Quick start guide

Related papers

Other documents