Page is loading ...
Installation Instructions,
56676
8" Post to Beam Flush (P2B-LS-8F)
Installation Instructions, 56676
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
1
Typical Installation
upper fasteners sold separately;
OWT Timber Screws or OWT Timber Bolts
kit includes 2 assemblies
318.26
12.53
127
5.00
19.96
.79
56676
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56676
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
2
Suggested Tools
(others may be required)
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56676
3
post
align notches
with top of
(Hex Cap Nut) provided
3/8" Driver
Tool Required
(OWT Screw) provided
step 1
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56676
4
step 2 Timber Screws
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56676
5
OWT Timber Screw
both sold separately
56621
beam rests on post
repeat step1 on
opposite side
(HCN)
3/8" Driver
Tool Required
(OWT Timber Screw)
see Installation Instructions,
OWT Timber Bolts BEFORE
proceeding
OWT Timber Bolt
sold separately
(HCN)
3/8" Driver
Tool Required
(Timber Bolt)
step 2 Timber Bolts
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56676
6
beam rests on post
repeat step1 on opposite
side after preparing
beam; see Installation
Instructions, Timber Bolts
/
